• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.533-542
• /
• 2006

In order to assess the integrity of pipes with local thinning area, the plastic strain as well as the elastic strain at the root of thinned region are required particularly when fluctuating load is applied to the pipe. For estimating elastic-plastic strain at local wall thinning area in a straight pipe under tensile load, an estimation model with idealized fully circumferential constant depth wall thinning area is proposed. Based on the compatibility and equilibrium equations a nonlinear estimation equation, from which local elastic-plastic strain can be determined as a function of pipe/defect geometry, material and the applied strain was derived. Estimation results are compared with those from detailed elastic-plastic finite element analysis, which shows good agreements. Noting that practical wall thinning in nuclear piping has not only a circular shape but also a finite circumferential length, the proposed solution for the ideal geometry is extended based on two-dimensional and three-dimensional numerical analysis of pipes with circular wall thinning.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1227-1234
• /
• 2012

본 연구에서는 감육결함이 가공된 실배관 곡관 시편을 대상으로 10 MPa의 내압과 반복 굽힘하중 조건에서 피로 시험을 수행하였다. 시험에는 감육결함이 곡관의 외호부와 내호부에 존재하는 경우를 고려하였으며, 반복 하중으로는 완전 역방향의 변위제어 형태로 작용되는 In-plane 상의 굽힘하중이 고려되었다. 실험 결과, 감육결함이 곡관의 외호부에 존재하는 경우에는 결함부가 아닌 곡관의 측면에서 축방향 균열이 생성되었다. 또한, ASME Sec.III의 설계 피로곡선에서 예측된 건전 곡관의 피로수명보다 긴 피로수명을 보였으며, 피로수명이 결함 길이에 크게 영향을 받지 않았다. 반면, 결함이 내호부에 존재하는 곡관은 내호부에서 원주방향 균열이 발생하였으며, 피로수명은 ASME Sec.III의 설계 피로곡선에서 예측한 건전 곡관의 피로수명보다 짧은 값을 보였다. 또한, 내호부 감육 곡관의 피로수명은 결함 길이가 감소함에 따라 뚜렷이 감소하였다.

• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1379-1386
• /
• 2013

본 논문에서는 용접부 중앙에 원주방향 관통균열이 있는 V-그루브 맞대기 용접 배관의 한계하중 해석을 수행하였다. V-그루브 맞대기 용접 배관이 그루브 각 $45^{\circ}$, $90^{\circ}$를 갖는 형상에 대한 한계하중 식을 제시하기 위해 용접 형상의 변화에 따른 용접부 너비를 정의하였고 강도불일치 비, 용접부 너비, 균열 길이 및 배관 반경 비에 대한 체계적인 변수 해석을 수행 하였다. 모재와 용접재는 탄성 완전소성재료로 가정하였으며 상불일치와 하불일치 조건에서의 인장 하중과 굽힘 하중에 대한 강도불일치 한계하중이 강도불일치 비($M_F$)와 형상변수(${\psi}$)를 통해 정량화 됨을 유한요소 해석을 통해 확인하였다.

• 대한두경부종양학회지
• /
• 제16권1호
• /
• pp.26-32
• /
• 2000

Background and Objectives: Various flaps are using for reconstruction of hypopharyngeal and esophageal defect. However, complication and indication of each flap are not fully analyzed. Patient and Methods: Records of 52 hypopharyngeal cancer patients who had surgical treatment and 13 other head and neck cancer patients who underwent hypopharyngeal and/or esophageal reconstruction with flap were retrospectively analyzed. Eighty three percent(54 cases) of patients needed reconstruction other than primary pharyngeal closure. Five split thickness skin graft, 1 pectoralis major myocutaneous flap, 20 forearm free flap, 13 jejunal free flap, 15 gastric pull up were used. Result: Flap failure was noted in 2 cases who had subsequent gastric transposition. Wound dehiscence and fistula were most common problem of forearm free flap. Most fistulas were developed in patients with conduit type reconstruction of forearm flap while there wasn't any fistula in patient with patch type reconstruction. Stenosis of lower anastomosis was the frequent problem of jejunal transfer. Gastric pull-up has frequent com-plication of stomal stenosis. All but three patients had reached oral feeding postoperatively. Conclusion: Based on this study, forearm flap is effective in partial hypopharyngeal defect while jejunum is the choice for circumferential defect. Gastric pull-up is for combined esophageal defect.

• 비파괴검사학회지
• /
• 제20권3호
• /
• pp.191-199
• /
• 2000

본 논문에서는 3차원 형태의 결함을 가진 관에 대한 와전류탐상의 유한요소 수치해석에 대하여 연구하였다. 3차원 와전류탐상 문제를 기술할 수 있는 전자기 수치해석기법으로 3차원 유한요소법을 사용하였다. 맥스웰방정식으로부터 지배방정식을 구하고, 갤러킨 가중잔차법을 이용하여 유한요소정식화를 수행하였다. 해석대상으로는 INCONEL 600 증기발생기 전열관을 사용하였으며, 관의 내부 및 외부에 존재하는 결함을 모델링하여 수치해석을 수행하고, 임피던스로 표현되는 와전류탐상 신호를 계산하였다. 결함 시험편에 존재하는 결함에 대하여 본 논문에서 계산된 결과와 실험결과를 비교하였으며, 잘 일치하는 결과를 얻어 본 논문에서 제안된 수치해석 방법의 타당성을 검증하였다. 이를 바탕으로 결함의 깊이 변화(38%, 58%, 75%) 및 원주방향으로의 결함각도 변화$90^{\circ},\;180^{\circ},\;270^{\circ},\;360^{\circ}$)에 따른 탐상 신호를 계산하여 결함의 크기변화에 따른 신호의 변화특성을 살펴보았다.

• Journal of Periodontal and Implant Science
• /
• 제46권3호
• /
• pp.176-196
• /
• 2016

Purpose: We sought to evaluate the effectiveness of bone substitutes in circumferential periimplant defects created in the rabbit tibia. Methods: Thirty rabbits received 45 implants in their left and right tibia. A circumferential bone defect (6.1 mm in diameter/4 mm depth) was created in each rabbit tibia using a trephine bur. A dental implant ($4.1mm{\times}8.5mm$) was installed after the creation of the defect, providing a 2-mm gap. The bone defect gaps between the implant and the bone were randomly filled according to the following groups: blood clot (CO), particulate Bio-Oss$^{(R)}$ (BI), and Bio-Oss$^{(R)}$ Collagen (BC). Ten animals were euthanized after periods of 15, 30, and 60 days. Biomechanical analysis by means of the removal torque of the implants, as well as histologic and immunohistochemical analyses for protein expression of osteocalcin (OC), Runx2, OPG, RANKL, and TRAP were evaluated. Results: For biomechanics, BC showed a better biological response ($61.00{\pm}15.28Ncm$) than CO ($31.60{\pm}14.38Ncm$) at 30 days. Immunohistochemical analysis showed significantly different OC expression in CO and BC at 15 days, and also between the CO and BI groups, and between the CO and BC groups at 60 days. After 15 days, Runx2 expression was significantly different in the BI group compared to the CO and BC groups. RANKL expression was significantly different in the BI and CO groups and between the BI and BC groups at 15 days, and also between the BI and CO groups at 60 days. OPG expression was significantly higher at 60 days postoperatively in the BI group than the CO group. Conclusions: Collectively, our data indicate that, compared to CO and BI, BC offered better bone healing, which was characterized by greater RUNX2, OC, and OPG immunolabeling, and required greater reversal torque for implant removal. Indeed, along with BI, BC presents promising biomechanical and biological properties supporting its possible use in osteoconductive grafts for filling peri-implant gaps.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.539-542
• /
• 2005

Reconstructions of soft tissue defect of the posterior ankle including Achilles the tendon should take into account not only coverage but functional outcome. Various methods of tendon transfer and tendon graft have been reported as a single-stage procedure. With advances and refinements in microsurgical techniques, several free composite flaps including tendon, fascia, or nerve have been used in single-stage reconstructions of large defects in this area minimizing further damage to the traumatized leg. However, when free flap is not feasible for some reasons, this cannot be accomplished successfully. Here we present a patient with Achilles tendon and circumferential large soft tissue defect. Because of circulatory compromise of the lower extremity, free flap reconstruction could not be applied. Instead, cross-leg composite flap of the dorsalis pedis flap including the extensor hallucis brevis musle and tendon, and tendon strips of the Second, third and fourth extensor digitorum logus were employed, Functional reconstruction of the tendon and resurfacing were obtained at the same time. The flap was detached 3 weeks postoperatively, and the transplanted flap has survived without any complications. By 3 months after surgery, full weight bearing, tip-toe standing and even walking without crutch assistance was possible. When functional reconstruction with the free flap is unattainable in the large defect of the posterior ankle including the Achilles tendon, cross-leg composite island flap of dorsalis pedis flap and tendon strips of the extensor digitorum longus tendon is a viable alternative.

• Nuclear Engineering and Technology
• /
• 제38권3호
• /
• pp.293-300
• /
• 2006

A liquid metal reactor (LMR) operated at high temperatures is subjected to both cyclic mechanical loading and thermal loading; thus, creep-fatigue is a major concern to be addressed with regard to maintaining structural integrity. The Korea Advanced Liquid Metal Reactor (KALIMER), which has a normal operating temperature of $545^{\circ}C$ and a total service life time of 60 years, is composed of various cylindrical structures, such as the reactor vessel and the reactor baffle. This study focuses on the creepfatigue crack initiation for a cylindrical Y-junction structure made of 316 stainless steel (SS), which is subjected to cyclic axial tensile loading and thermal loading at a high-temperature hold time of $545^{\circ}C$. The evaluation of the considered creep-fatigue crack initiation was carried out utilizing the ${\sigma}_d$ approach of the RCC-MR A16 guide, which is the high-temperature defect assessment procedure. This procedure is based on the total accumulated strain during the service time. To confirm the evaluated result, a high-temperature creep-fatigue structural test was performed. The test model had a circumferential through wall defect at the center of the model. The defect front of the test model was investigated after the $100^{th}$ cycle of the testing by utilizing a metallurgical inspection technique with an optical microscope, after which the test result was compared with the evaluation result. This study shows how creep-fatigue crack initiation for a high-temperature structure can be predicted with conservatism per the RCC-MR A16 guide.

• 대한기계학회논문집A
• /
• 제32권12호
• /
• pp.1063-1071
• /
• 2008

This paper provides a failure pressure evaluation model for local wall-thinned elbows. In this study, parametric finite element analyses are performed on the elbows containing local wall-thinning defect at their intrados and extrados, and the failure pressures are obtained from the analysis results by applying a local failure criterion that was validated by real-scale pipe tests. An evaluation model including the effects of thinning depth, length, circumferential angle, thinning location, and elbow geometries on the failure pressure is derived based on the evaluated failure pressures. The proposed model agrees well with the results of finite element analyses and reasonably estimates the dependence of failure pressure on the wall-thinning dimensions and elbow geometries. Also, the comparison with experimental data demonstrates that the proposed evaluation model can accurately predict the failure pressure of local wall-thinned elbows.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.6-11
• /
• 2004

CNG buses were introduced in 2002 to reduce air pollution to the big cities. The durability and safety evaluation were performed for the NGV-2 type cylinders taken from two buses after 30 months of running. No external damage and no internal corrosion was observed on the container surfaces. Defect exceeding the allowable limit was not found in the UT test. Permanent volume expansion was about 1.2% which is much smaller than the required design limit. Cycling test showed no failure after 11,250cycles and burst pressures were still above the maximum design pressure. Both the longitudinal and circumferential failure mode were observed, where both the fracture strengths were far above the design limit. This study showed the present CNG fuel cylinders were safe enough for further usage.