• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.20 no.2
• /
• pp.11-23
• /
• 2024

In order to design a standing column well (SCW) for a sustainable groundwater curtain system for greenhouse heating, we conducted parameter sensitivity tests. These tests simulated the outlet temperature changes of the SCW in a groundwater recirculating greenhouse cultivation system. Our modeling considered ground thermal conductivity and hydrogeological conditions. Specifically, we examined several factors, including SCW length, enhanced thermal conductivity of the ground, and groundwater circulation rate. The simulation results indicated that there was not a significant difference in the heat exchange rate based on the characteristics of enhanced thermal conductivity. However, we anticipate a substantial difference in the case of varying SCW lengths. Therefore, we conclude that the simulation results are primarily influenced by conductive heat exchange values, as the circulating water remains at a constant groundwater level.

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.92-100
• /
• 2011

With the increased demand of clean energy and global warming measures, the renewable energy development has been increased recently. The TCP (Tidal Current Power) is one of the ocean renewable energy sources. Having the high tidal energy source in Korea, there are many potential TCP sites with strong current speed. The rotor, which initially converts the energy, is a very important component because it affects the efficiency of the entire system. The rotor performance is determined by various design parameters including number of blades, shape, sectional size, diameters and etc. However, the interactions between devices also contribute significantly to the energy production. The rotor performance considering the interaction needs to be investigated to predict the exact power in the farm. This paper introduces the optimum design of TCP turbine and the performance of devices considering the interference between rotors.

• The Korean Journal of Ecology
• /
• v.4 no.1_2
• /
• pp.33-37
• /
• 1981

This study was carried out to investigate the changes of flower properties due to decomposition in the course of time and results obtained are as follows; 1. The flower shape of Salix babylonica changed so rapid that it was difficult to recognize fragments after 40 days. 2. Total weight decreased by 50% after about 40 days. Loss on ignition changed rapidly for 40 days and then steadily. 3. Remaining carbon content decreased by a half only for first 20 days, then did steadily. 4. The content of phosphorus and total nitrogen slowly during the early period and then rapidly. 5. Above phenomena are supposed to be responisble for water content, nitrogen, and phosphorus.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.190-207
• /
• 2015

In the combustion engineering, to decrease pollution and increase production efficiency, and to optimally keep solid burning material amount constant in a burner online, it needs a smart method to detect the amount variation of the burning materials in a high temperature environment. This paper presents an online machine vision system for automatically measuring and detecting the burning material amount inside a burner or a boiler. In the camera-protecting box of the system, a sub-system for cooling is constructed by using the cooling water circulation techqique. In addition, the key and intelligent step in the system is to detect the pile profile of the variable burning material, and the algorithm for the pile profile tracing was studied based on the combination of the gey level (color) discontinuity and similarity based image segmentation methods, the discontinuity based sub-algorithm is made on the quaternion convolution, and the similarity based sub-algorithm is designed according to the region growing with multi-scale clustering. The results of the two sub-algoritms are fused to delineate the final pile profile, and the algorithm has been tested and applied in different industrial burners and boilers. The experiements show that the proposed algorithm works satisfactorily.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.86.1-86.1
• /
• 2011

To improve the safety, the fuel cell operate inside a pressurized enclosure which contains inert gas so called protective gas. The protective gas not only prevents the mixture of hydrogen and oxygen, but also removes the water in the vessel with the condenser. This study presents the details of the flow optimization in order to reduce the humidity in the fuel cell housing. The protective gas flow in the fuel cell container is studied by Computational Fluid Dynamics(CFD) simulations. This study focuses on optimizing the geometry of an protective gas circulation system in fuel cell module to reduce the humidity in the vessel. CFD analysis was carried out for an existing model to understand the flow behavior through the fuel cell system. Based on existing model CFD results, geometrical changes like inlet placement, optimization of outlet size, modification of fuel cell module system are carried out, to improve the flow characteristics. The CFD analysis of the optimized model is again carried out and the results show good improvement in protective gas flow behavior.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.251-258
• /
• 2014

In order to set up the basic environmental control systems which the new concept greenhouses have to equip, greenhouse characteristics, environmental management and control systems in domestic glasshouses and plastic houses were investigated and analyzed comparatively. Survey results on the width, length, eaves height, and the number of spans etc. showed that glasshouses were bigger than plastic houses significantly. New concept greenhouses claim to be plastic houses, but it will be reasonable to follow the specifications of the glasshouse. Specifications to be applied to new concept greenhouses were proposed as follows; hot water heating systems, aluminum screens as the thermal curtain, evaporative cooling systems, roof vents on the ridge, circulation fans, $CO_2$ enrichment, hydroponic systems, and automatic irrigation control systems. Environmental measurement systems for the indoor and outdoor temperature, humidity, light, wind speed and indoor $CO_2$ concentration have to be fully equipped. The automatic control system has to be as a complex environmental control system, not a single item control system. Also, for stable dissemination, domestically producing complete greenhouse control system should be made as soon as possible.

• Nuclear Engineering and Technology
• /
• v.45 no.2
• /
• pp.179-190
• /
• 2013

A station blackout experiment called SBO-01 was performed at the ATLAS facility. From the SBO-01 test, the station blackout scenario can be characterized into two typical phases: A first phase characterized by decay heat removal through secondary safety valves until the SG dryouts, and a second phase characterized by an energy release through a blowdown of the primary system after the SG dryouts. During the second phase, some physical phenomena of the change over a pressurizer function, i.e., the pressurizer being full before the POSRV $1^{st}$ opening and then its function being taken by the RV, and the termination of normal natural circulation flow were identified. Finally, a core heatup occurred at a low core water level, although under a significant amount of PZR inventory, whose drainage seemed to be hindered owing to the pressurizer function by the RV. The transient of SBO-01 is well reproduced in the calculation using the MARS code.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.753-764
• /
• 2009

JAEA started the LSTF experiments in 1985 for the fourth stage of the ROSA Program (ROSA-IV) for the LWR thermal-hydraulic safety research to identify and investigate the thermal-hydraulic phenomena and to confirm the effectiveness of ECCS during small-break LOCAs and operational transients. The LSTF experiments are underway for the ROSA-V Program and the OECD/NEA ROSA Project that intends to resolve issues in thermal-hydraulic analyses relevant to LWR safety. Six types of the LSTF experiments have been done for both the system integral and separate-effect experiments among international members from 14 countries. Results of four experiments for the ROSA Project are briefly presented with analysis by a best-estimate (BE) code and a computational fluid dynamics (CFD) code to illustrate the capability of the LSTF and codes to simulate the thermal-hydraulic phenomena that may appear during SBLOCAs and transients. The thermal-hydraulic phenomena dealt with are coolant mixing and temperature stratification, water hammer up to high system pressure, natural circulation under high core power condition, and non-condensable gas effect during asymmetric SG depressurization as an AM action.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.43-49
• /
• 2011

For the improvement of water quality in a harbor, several studies have been carried out on SEB (Seawater Exchange Breakwater) in recent years, but a problem has been shown whereby the water on the inside area far from the SEB cannot be easily exchanged. In order to solve the problem of the SEB, the Manifold channel, a new concept of the SEB, is introduced in this paper. By using the manifold channel, it is possible to exchange the water of the inside area for seawater from the outside. Here, to assess the outflow gates of the manifold channel governing flow behavior, a virtual manifold channel controlled the location, width and direction of outflow gates applied to the Jumunjin fishery port, where the SEB has been established. In addition, the desirable flow pattern of the port by utilizing the two layer current model is identified, and five general cases of the manifold channel are described in this paper. The model is verified by comparing with observation of the SEB model, and the results are in general agreement. From the results of the manifold channel, in the case of the Jumunjin fishery port, the small circulation of counter clockwise is necessary for the water exchange on the inside area, but it should be controlled by the outflow gates for other areas. Using the two layer current model, the desirable flow pattern of the port can be predicted, and the water exchange for the upper and lower layer can be examined. For the practical use of the manifold channel, further studies on the manifold channel will be necessary, and it may then be used broadly for the design of breakwater in the future.

• Journal of Energy Engineering
• /
• v.22 no.3
• /
• pp.287-293
• /
• 2013

This study was carried out to diminish the formation of scale in boilers which is one of the defect elements when they are operating. The defect relating to scale can cause a fatal impact on the explosion of boilers due to the overheating of their tubes, or it can affect the flow of water inside boilers with its bad circulation and result in a disparity of water inside the equipment. Heat transfer in the scale is low comparing to the boiler material, so it can lead to energy losses and has also impact on the global warming. In 2005, the Korean government introduced a system which requires boiler users to install the equipment which can prevent or eliminate the formation of scale to improve the management of water quality in boilers. The study on the techniques for preventing or eliminating the formation of scale started in 1821 and since then subsequently there have been lots of similar studies. The first one was about the scale reduction using potato starch. Since an ultrasonic scale preventer developed by a scientist from a Russian acoustic institute was introduced in1993, a variety of equipment of this kind have been disseminated in Korea. There has been a need to demonstrate the condition for the best performances of such equipment. Boilers are mostly composed of the main body and 288 the tube with a circular curved surface. I carried out a demonstration study on a circular tube which affects the scale defect the most among the boiler components. As a result of it, I found out the fact that the ultrasonic wave needs to reach a certain level of sound pressure and frequency to affect the formation of scale.