• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1191-1192
• /
• 2015

To assess the deterioration condition of stator insulation, diagnostic and overpotential tests were performed on two high voltage(HV) motors for circulating water pump (CWP). Following the long term rewinding program, the diagnostic test was performed on two motors during the planning maintenance period. After completing the diagnostic test, overpotential test was done on the stator windings of HV motors. During the overpotential test, the No. 1 and No. 2 of HV motors failed at 8.8 kV and 7.9 kV, respectively. Stator windings of two HV motors had deteriorated significantly.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.65-75
• /
• 1996

A pilot plant, which is simplified the hot water heating control system of a large scale residential building, is used to investigate the effects of control methods and operating conditions on the system performance and to compare control characteristics. Digital variable structure controller(DVSC) and digital PI controller are implemented to control the speed of the circulating pump for the pilot plant using PC. For the DVSC, a control algorithm is suggested, which using a nonlinear sliding surface and a PID sliding surface outside and inside of output error boundary layer, respectively. Smith predictor algorithm is used for the compensation of long dead time. The suggested DVSC yields improved control performance compared with existing DVSC using linear sliding surface only. the system responses with the suggested DVSC shows good responses without overshoot for various operating conditions and robust under external disturbances compared with digital PI controller.

• 대한조선학회지
• /
• 제26권3호
• /
• pp.1-8
• /
• 1989

유동의 가시화 혹은 물체주위의 유동장 측정을 위하여 적당한 크기의 소형 회로수조를 실험실에서 제작, 레이저 유속계를 사용하여 그 유동장 특성을 조사하였다. 수직형 회로수조는 유동이 굽어진 부분을 지나면서 실험측정 부분에서 평균속도분포가 균일하지 못하며, 균일한 유동장을 얻기 위해 수축부 다음에 표면 유동 가속기를 설치하였다. 적당한 표면유동가속으로 안정되고 균일한 속도분포를 얻을 수 있으며, 이 표면유동가속기의 최적점을 찾는 함수로는 단순 평균속도 뿐만 아니라 난류강도도 중요한 요소임이 실험적으로 밝혀졌다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.53-59
• /
• 2001

In this Paper, the resistance performances of twin hull forms, which are simplified as two-dimensional wedge shape, are experimentally investigated in low and middle speed ranges to find out the effect of distance between two hulls and fore-body shape for the future hull form development of catamaran type sweeping vessel. The model tests are performed for seven different cases for three models in the circulating water channel(CWC) of Inha Technical College. The free surface flows are observed together to investigate the relation between resistance performance and free surface characteristics. A conceptual design for the modification of bow hull form is presented and the efficiency is discussed.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.80-84
• /
• 2004

The initial hull form of a 3 G/T and 30 knots class coastal leisure boat is newly developed. The performances measured, resistance, trim and sinkage, are investigated in a high-speed, circulating water channel (CWC). The effect of a fin attached on the hull side is studied together. Wave patterns are observed to clarify the relationship between the resistance performance and the wave characteristics. It can be found that the fin plays a role of increasing the resistance performance above a certain velocity.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.14-18
• /
• 2012

A 30ft class aluminum leisure boat is newly developed and the resistance performances are investigated by a model test at a high-speed circulating water channel. The effect of a fin attached to the side of the hull is studied at two different displacements. Wave patterns are observed to make clear the relationship between the resistance performance and wave characteristics. It can be found that a chine position at the draft line can have a strong effect on the resistance performance around a certain velocity range.

• 한국해양공학회지
• /
• 제22권3호
• /
• pp.58-63
• /
• 2008

A 32-ft class leisure boat was newly developed using statistical analysis of actual ships. Resistance performances were investigated by testing models in a high-speed circulating water channel, and with the CFD method. The effects of a trim tab and of a fin attached at the hull side were studied together. Wave patterns were observed to clarify the relationship between resistance performance and wave characteristics. It was found that a trim tab and a side fin play a role in increasing resistance performance within a certain velocity range.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.89-93
• /
• 2002

Resistance performance of 6.67 G/T class fishing vessel is experimentally investigated in low and middle speed ranges to find out the effect of a new chine. The tests are performed for four different cases in the circulating water channel(CWC). Wave patterns are observed together to make clear the relation between the resistance performance and the wave characteristics. The results show that the new chine can be one of the effective device to reduce the resistance.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.192-197
• /
• 2003

Initial hull form of 3 G/T and $20{\sim}25$ knots class coastal leisure boat is newly developed. The performances, which are resistance, trim and sinkage, are investigated at high speed circulating water channel (CWC). Wave patterns are observed together to make clear the relation between the resistance performance and the wave characteristics.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.63-69
• /
• 2011

Hull forms for catamaran type small fishing boat powered by electric motor are newly developed by experimental approaches. Model tests for two hull forms having different length are made at circulating water channel. Resistance performance and wave patterns are compared to carry out an analysis of the effect of extension of main body. The results show that the extension of main body can give better resistance performance above a certain velocity.