• 한국지반공학회논문집
• /
• 제30권3호
• /
• pp.29-46
• /
• 2014

모래지반의 지표면에 위치한 거친 바닥면을 가진 강체 원형기초에 대하여 삼차원 수치해석을 통하여 수직-수평 조합하중 조건에서의 지지력을 구하였다. 조합하중 상관도를 효율적으로 산출할 수 있는 swipe 재하방법과 실제 구조물의 하중 조건과 유사한 probe 재하방법을 모사할 수 있는 수치모델을 구현하였으며 요소망의 조밀도에 의한 오차를 소거할 수 있는 분석 절차를 개발하였다. Mohr-Coulomb 소성모델을 사용하고 관련흐름법칙을 적용하여 지반의 내부 마찰각에 따른 수직-수평 조합하중에 대한 지지력 상관도와 경사계수를 산출하였다. Swipe 재하방법의 결과는 probe 재하방법을 사용한 결과와 유사함을 확인하였으며, 거친 바닥면 조건에서 수직-수평 조합하중 지지력 상관도의 내부 마찰각에 따른 변화는 미미하고, 원형기초에 대해서 연속기초 및 사각형기초와 동일한 경사계수를 적용할 수 있는 것으로 나타났다. 하중의 경사가 큰 경우에는 수치모델링을 통해 산출된 원형기초에 대한 지지력 상관도와 경사계수는 기존의 연구 결과보다 작게 평가되었으며, 수치모델링 결과에 영향을 미치는 요인과 향후 연구 방향에 대하여 고찰하였다.

• 한국농공학회지
• /
• 제30권1호
• /
• pp.38-49
• /
• 1988

This paper presented as follows results of laboratory model tests with various shaped footings on soil bed reinforced with the strips on the base of behaviour of soil structure according to the loads and triaxial test results reinforced with geotextiles. Their parameters studied were the effects on the bearing capacity of a footing of the first layer of reinforcement, horizontal and vertical spacing of layers, number of layers, tensile strength of reinforcement and iclination load to the vertical 1.Depending on the strip arrangement, ultimate bearing capacity values could be more improved than urreinforced soil and the failure of soil was that the soil structure was transfered from the macrospace to microspase and its arrangement, from edge to edge to face to face. 2.The reinforcement was produced the reinforcing effects due to controlling the value of factor of one and permeable reinforcement was never a barrier of drainage condition. 3.Strength ratio was decreased as a linear shape according to increment of saturation degree of soil used even though at the lower strength ratio, the value of M-factor was rot influenced on the strength ratio but impermeable reinforcement decreased the strength of bearing capacity. 4.Ultimate bearing capacity under the plane-strain condition was appeared a little larger than triaxial or the other theoretical formulars and the circular footing more effective. 5.The maximum reinforcing effects were obtained at U I B=o.5, B / B=3 and N=3, when over that limit only acting as a anchor, and same strength of fabric appeared larger reinforcing effects compared to the thinner one. 6.As the LDR increased, more and more BCR occurred and there was appeared a block action below Z / B=O.5, but over the value, decrement of BCR was shown linear relation, and no effects above one. 7.The coefficient of the inclination was shown of minimum at the three layers of fabrics, but the value of H / B related to the ultimate load was decreased as increment of inclination degree, even though over the value of 4.5 there wasn't expected to the reinforcing effects As a consequence of the effects on load inclination, the degree of inclination of 15 per cent was decreased the bearing capacity of 70 per cent but irnproved the effects of 45 per cent through the insertion of geotextile.