• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.459-467
• /
• 2010

A new type of circularly polarized(CP) antenna that is characterized by having both low-profile and greater axial-ratio bandwidth(ARBW) beyond existing antennas is introduced through analysis of artificial magnetic conductor(AMC) polarizer, and experimentally demonstrated. Although it is made use of a linear-polarized dipole antenna with close proximity to ground plane, it is backed by AMC polarizer so as to efficiently radiate with circularly changed polarization whose ARBW is determined by the texture geometry, whereas existing antennas exhibit CP surface-current on radiators, which limit ARBW. The mechanism of the polarization conversion is theoretically analyzed for ARBW, and the experimental properties including the impedance matching, CP radiation pattern, axial-ratio pattern, ARBW, and two-port isolation are discussed.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.437-441
• /
• 2001

This paper describes the construction of a circular polariscope. Generally, a circular polariscope contains four optical elements and a light source. The first element following the light source is called the polarizer. It converts the ordinary light into plane-polarized light. The second element is a quarter wave plate which converts the plane-polarized light into circularly polarized light. Following the quarter wave plate, a specimen made of transparent photoelastic material is located in a loading device. The second quarter wave plate is set and the last element is the analyzer. These polarizing elements, two quarter wave plates and two polarizing filters, were purchased from the USA. Frames and other structures for holding polarizing filters were machined and assembled to be rotated. Light box, which include four incandescent lamps and two sodium-vapor lamps, was made. In order to proof the function of the newly built polariscope, Tardy compensation test was applied to a rectangular shaped specimen made of poly-carbonate material (PSM1). The error of the fringe constant, which was measured by the newly built polariscope, was within 4.4 percent compared to the standard value of this material. It is possible to make a good quality of polariscope if accurate polarizing filters will be used.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.126-133
• /
• 2009

In this paper, The planar waveguide slotted antenna is presented for a satellite communication of vehicles. In stead of the microstrip patch array antenna having a dielectric loss and a feeding loss, the proposed antenna has the 3-layered waveguide feeding network structure for assembling easily. Also this antenna can receive mechanically both RHCP and LHCP transmitted from a satellite using a polarizer made from a thin single layer film. The Gain of the proposed 4X8 array antenna is 27.5dB and the gain of 8X16 array antenna is 32dB.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.124-136
• /
• 2001

In this paper, we designed and manufactured the Ku-band circular waveguide antenna to do wireless communication with a ground radar as on-board antenna of missile. Using the MATLAB and the HFSS, we designed the circular polarizer which has a characteristic of circular polarization and broadband using the capacitive pin method, the feeder to feed coaxial line to circular waveguide, and a stopper to prevent a conductor material from being inserted. Then we simulated the designed antenna using the HFSS, obtained the gain and the radiation pattern. Because of a difficulty of manufacture, we established a manufacture process procedure. Antenna is manufactured with this procedure, test results of the manufactured antenna are the axial ratio of 1.37 ~ 1.72, the 3 ㏈ beamwidth of $72.23^{\circ}{\sim}78.54^{\circ},$ and the gain of 3.26 ~ 4.61 ㏈ within frequency band. We knew that these results are similar with simulation results. Also, we confirmed that the manufactured antenna is satisfied with requirement conditions through performance test, environmental test and flight test.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.140-144
• /
• 2013

This paper presents the novel design of circular polarized Ka-band horn array antenna. The element antenna of the arrya is composed of two parts, microstrip patch and square horn, and the microstrip patch is fed by corner truncated microstrip patch for circular polarization. The patch antenna has the role of a feeder and polarizer of the horn, thus the whole size of the horn antennae can be considerably reduced. The $1{\times}8$ horn array was designed and fabricated by the spacing of $0.9{\lambda}_0$ among the element horn. The element horn has typical gain of 8dBi and axial-ratio bandwidth of 4.9% at 3dB, and the minimum gain and axial-ratio bandwithd of the array is 14dBi and 8.2%.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.889-893
• /
• 2014

This paper presents a high-performance dual-circularly polarized feed employing a dielectric-filled circular waveguide. Novel features are incorporated in the proposed feed, such as a dielectric rod radiator for high gain and good impedance matching; dual quarter-wave chokes for low axial ratio over wide angles and for low back radiation; an integrated septum polarizer; and two end-launch-type coaxial-to-waveguide transitions. The proposed feed shows excellent performance at 5.0 GHz to 5.2 GHz.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.597-599
• /
• 2009

We have developed new type of LCD Device which enables switching from reflective to tranmissive LCD mode and vice versa according to brightness of the surrounding. Alternation in these modes are possible by adding on circular polarized sheet and retardation film onto the bottom polarizer which allows the control of the back light and the LCD cell gamma voltage depending on the atmosphere. This method has been evaluated and confirmed by running on the LCD module device in which we have optimized retardation value by Poincare polarizer analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.38-43
• /
• 2004

This paper describes the construction of a circular polariscope. Generally, a circular polariscope contains four optical elements and a light source. The first element following the light source is called the linear polarizer. It converts the ordinary light into plane-polarized light. The second element is a quarter wave plate which converts the plane-polarized light into circularly polarized light. Following the quarter wave plate, a specimen made of transparent photoelastic material is located in a loading device. The second quarter wave plate is set and the last element is the analyzer. These polarizing elements, two quarter wave plates and two linear polarizing filters, were purchased from the USA. Frames and other structures for holding polarizing filters were machined and assembled to be rotated. Light box, which includes four incandescent lamps and two sodium-vapor lamps, was made. In order to proof the function of the newly built polariscope, Tardy compensation test was applied to a rectangular shaped specimen made of poly-carbonate material (PSM 1). The error of the fringe constant, which was measured by the newly built polariscope, was within 4.4 percent compared to the standard value of this material. It is possible to make a good quality of polariscope if accurate polarizing filters will be used.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.10
• /
• pp.1-11
• /
• 1993

A narrow-band dual TE$_{111}$ mode circular waveguide filter for Ku-Band satellite transponder was designed and manufactured based on a new model of the filter. We calculated the cavity size, pin polarizer depth and diameter, iris length and width, and used Bethe's Small Diffraction Theory and Chon's Correction Formular in order to obtain exact Result for each cavity. The designed dual model waveguide filter was manufactured with invar in order to maintain the thermal stability, and the filter performance was improved through the thermal test and vibration test to endure in the cosmic environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1142-1145
• /
• 2006

The Finite-difference time-domain (FDTD) method is used to directly solve Maxwell's equations, and the techniques required for optical simulation of Bragg reflections of cholesteric liquid crystal (ChLC) displays are introduced in this paper. The simulated results show that the color gamut of a ChLC display can be broadened by using of a circular polarizer on top surface of the ChLC film, and are examined by experiments.