• 항공우주기술
• /
• 제3권2호
• /
• pp.170-176
• /
• 2004

본 연구에서는 원격측정명령처리기의 위성체의 구성 변경을 담당하는 릴레이구동 회로를 구현하고 검증하였다. 먼저 릴레이구동 회로의 규격을 정의하고 정의된 규격을 만족하는 릴레이 구동회로를 설계하였다. 릴레이구동 회로의 설계 검증을 위해 시뮬레이션을 통한 릴레이구동 펄스 전류 및 전압을 확인하였으며 또한 릴레이구동 회로 기능 시험 결과와 시뮬레이션 결과의 비교를 통해 정의한 규격의 릴레이구동 펄스 전류 및 전압을 제공하는지 확인하였다. 또한 각 소자의 허용오차 값을 고려한 최악조건해석을 통해 안정적으로 릴레이를 구동할 수 있음을 확인하였다.

• 한국정보통신학회논문지
• /
• 제18권12호
• /
• pp.2933-2938
• /
• 2014

전류컨베이어 회로를 이용한 주파수 고정 루프 회로를 $0.35{\mu}m$ CMOS 공정으로 설계하였다. 공급전압은 3volts를 사용하였다. 설계된 회로는 분주기, 주파수-전압 변환기, 전압 감산기 및 발진기로 구성하였으며, 각 회로 블록을 대칭적으로 배치하여 공정 변화에 따른 신뢰성 특성을 향상시켰다. HPICE 시뮬레이션 결과 MOS 트랜지스터의 채널길이, 채널 폭, 저항 및 커패시터의 크기가 ${\pm}5%$ 변화할 때 출력주파수의 변화율은 ${\pm}1%$ 내외였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.932-939
• /
• 2012

This paper presents an equivalent circuit model of a LIPB (Li-Ion Polymer battery) for Hybrid Electric Vehicles (HEVs). The proposed equivalent circuit can be used to predict the charging/discharging characteristics in time domain as well as the impedance characteristic analysis in frequency domain. Based on these features, a one-cell model is established as a function of Depth of Discharge (DoD), and a 48-cell model for a battery pack was also established. It was confirmed by experiment that the proposed model predict the discharging and impedance (AC) characteristics quite accurately at different constant current levels. To check the usefulness of the proposed circuit, the model was used to simulate a motor driving circuit with an Insulated Gate Bipolar Transistor (IGBT) inverter and Brushless DC (BLDC) motor, and it is confirmed that the model can calculate the battery voltage fluctuation in time domain at different DoDs.

• 전력전자학회논문지
• /
• 제11권6호
• /
• pp.543-550
• /
• 2006

AC Plasma display panel(AC-PDP) 구동을 위한 Six-switch를 적용한 Three-level PDP Sustain 회로를 제안한다. 제안 회로는 기존 회로의 Sustain 스위치와 Clamp 다이오드의 내압이 절반이 되어 특성이 우수한 반도체 소자의 채택이 가능하며, 높은 전력 효율을 가지는 장점을 가지므로 AC-PDP 구동 회로 설계에 매우 적합하다. 본 논문에서는 기존 회로와 제안 회로의 비교 분석 및 시뮬레이션과 실험 결과를 보인다.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.237-240
• /
• 2021

This research proposes a new rectifier circuit to reduce the circulating current of a phase-shifted full bridge converter. The proposed circuit is a structure in which the output inductor of the secondary rectifier circuit is changed to a coupled inductor in the phase-shifted full bridge with the existing center-tapped rectifier. The parts are rearranged after adding a diode. After applying the proposed circuit, the circulating current to the primary current of the transformer and the voltage stress of the rectifier diode on the secondary side of the transformer are reduced. Accordingly, the snubber loss of the rectifier is improved. By reducing the circulating current and snubber loss, the circuit achieves higher efficiency than conventional circuits. In this research, we present the structure of the proposed circuit, its strengths, and the analysis results from experiments. Furthermore, its effectiveness is verified through the experimental results of a prototype converter with an input of 300-400 V and an output of 50 V/1 kW.

• Journal of Power Electronics
• /
• 제6권4호
• /
• pp.330-339
• /
• 2006

This paper deals with novel electronic ballast based on single-stage power processing topology using a symmetrical half-bridge inverter and current injection circuit. The half-bridge inverter drives the output parallel resonant circuit and injects current through the power factor correction (PFC) circuit. Because of high frequency current injection and high frequency modulated voltage, the proposed circuit maintains the unity power factor (UPF) with low THD even under wide variation in ac input voltage. This circuit needs minimum and lower sized components to achieve the UPF and high efficiency. This leads to an increase in reliability of ballast at low cost. Furthermore, to reduce cost, the electronic ballast is designed for two series-connected fluorescent lamps (FL). The analysis and experimental results are presented for ($2{\times}36$ Watt) fluorescent lamps operating at 50 kHz switching frequency and input line voltage (230 V, 50 Hz).

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.240-246
• /
• 2012

This paper presents a novel modeling technique for traces that cross a defected ground structure. A simple and accurate equivalent circuit model provides clear insight into the coupling mechanism between a microstrip line and a slot or split. The circuit models consist of a transformer as the coupling mechanism and LC resonators as the ground with a slot or split structure. Resistors, capacitors, and inductors are added to the model to increase accuracy and equivalence at high frequency. Simulated and measured S-parameters are presented for defected ground structures. The accuracy and validity of the proposed equivalent circuit model is verified by evaluation of the S-parameter characteristics of the defected ground structures and comparison with measured results.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.340-347
• /
• 2016

At the stroke end of an electromagnetic circuit breaker, the high speed of the mover makes a huge impact at the contact point, which induces the rebound problem of the mover that causes a breaker failure. Thus, a speed reduction equipment is required to address such problems. This study suggests to use an electric brake reduces the speed at the end of the stroke. The proposed circuit breaker which adopts the electric brake has a variable speed reduction function such that the continued rebound phenomenon ceases to occur. The electric brake is designed by the Finite Element Method (FEM) and the circuit and motion equations are solved using Time Difference Method (TDM). The comparisons between the simulation and experiments demonstrated the usefulness and validity of this study.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.589-595
• /
• 2004

The ESD protection characteristic of chip varistors on a circuit board can not be analyzed by using a conventional circuit simulator due to its microwave characteristic. Thus, by employing Agilent's microwave circuit simulator ADS, we showed that the ESD Protection characteristic or chip varistors can be investigated. order to got more precise simulation results, a chip varistor model was extracted from the electrical characteristic of a TDK's chip varistor and the distributed circuit based pattern was designed as the ESD propagation path. The simulation results showed that the ESD protection characteristic of a chip varistors can be improved drastically by reducing the ESD propagation path.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.11-16
• /
• 2001

Recent publications showed that a pair of neighboring printed circuit board (PCB) windings can be used as a contactless energy transfer device. As a continued study on this area, the current paper presents the modeling, analysis, and application of the neighboring PCB windings with an emphasis on their circuit properties and device characteristics as a contactless energy transfer device. Theoretical results of the paper are confirmed with experiments on a prototype contactless energy transfer circuit that delivers 24W output power at $68\%$ efficiency through two 35mm-diameter PCB windings separated each other by 2.4mm.