• Carbon letters
• /
• 제7권3호
• /
• pp.171-179
• /
• 2006

A carbonaceous sorbent was prepared from rice husk via sulphuric acid treatment. After preparation and washing, the wet carbon with moisture content 85% was used in its wet status in this study due to its higher reactivity towards Cr(VI) than the dry carbon. The interaction of Cr(VI) and the carbon was studied and two processes were investigated in terms of kinetics and equilibrium namely Cr(VI) removal and chromium sorption. Cr(VI) removal and chromium sorption were studied at various initial pH (1.6-7), for initial Cr(VI) concentration (100 mg/l). At equilibrium, maximum Cr(VI) removal occurred at low initial pH (1.6-2) where, Cr(III) was the only available chromium species in solution. Cr(VI) removal, at such low pH, was related to the reduction to Cr(III). Maximum chromium sorption (60.5 mg/g) occurred at initial pH 2.8 and a rise in the final pH was recorded for all initial pH studied. For the kinetic experiments, approximate equilibrium was reached in 60-100 hr. Cr(VI) removal data, at initial pH 1.6-2.4, fit well pseudo first order model but did not fit pseudo second order model. At initial pH 2.6-7, Cr(VI) removal data did not fit, anymore, pseudo first order model, but fit well pseudo second order model instead. The change in the order of Cr(VI) removal process takes place in the pH range 2.4-2.6 under the experimental conditions. Other two models were tested for the kinetics of chromium sorption with the data fitting well pseudo second order model in the whole range of pH. An increase in cation exchange capacity, sorbent acidity and base neutralization capacity was recorded for the carbon sorbent after the interaction with acidified Cr(VI) indicating the oxidation processes on the carbon surface accompanying Cr(VI) reduction.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.34-38
• /
• 2001

Fe-28%Al($Fe_3Al$)과 Fe-28%Al-4%Cr($Fe_3Al-4Cr$) 금속간화합물을 대기중 1073, 1273, 1473k의 온도에서 최고 17일까지 장시간 산화시켰다. $Fe_3Al-4Cr$의 산화저항은 근본적으로 $Fe_3Al$과 거의 비슷하거나, 약간 우수하였다. $Fe_3Al$ 위에 형성된 산화물은 거의 순수한 ${\alpha}-AL_2O_3$로만 구성되어 있었으며, $Fe_3Al-4Cr$ 위에 형성된 산화물은 약간의 Fe와 Cr 이온이 고용된 ${\alpha}-AL_2O_3$로 구성되어 있었다. 외부산화막을 형성하기 위해 모재원소의 외부확산에 의해 산화물-모재 계면에는 Kirkendall 기공이 존재하였다. $Fe_3Al(-4Cr)$ 표면에 형성된 산화막은 1273k가지는 비교적 얇고 치밀하였으나, 1473k에서 산화막의 박리와 함께 상대적으로 큰 무게증가가 발생하였다.

• 공업화학
• /
• 제10권1호
• /
• pp.58-66
• /
• 1999

알루미나에 담지한 $CrO_x$ 촉매를 이용하여 $200{\sim}400^{\circ}C$의 온도 구간에서 공기 중 vinyl chloride의 산화반응을 조사하였다. 탄소를 포함하는 주생성물은 CO 및 $CO_2$로, 온도의 증가에 따라 $CO_2$의 선택도는 증가하고 CO는 감소하였다. 이로부터 $CrO_x$ 촉매상에서 vinyl chloride는 먼저 CO로 일차산화 후 다시 $CO_2$로 완전산화됨을 알 수 있었다. 반응물에 HCl을 첨가하였을 때 vinyl chloride의 전환율은 변화가 없었으나 $CO_2$의 선택도는 감소하였는데 이는 주반응생성물인 HCl이 vinyl chloride의 $CO_2$로 완전산화를 방해함을 의미한다. 반응물에 물이 없는 조건하에서 vinyl chloride를 산화시킬 때 상당량의 $Cl_2$가 생성되었으나 물을 첨가 시 $Cl_2$는 검출되지 않았다. Vinyl chloride의 촉매산화반응에 대한 $CrO_x$ 담지촉매와 몇가지 귀금속 및 다른 전이 금속 산화물의 활성을 비교하였는데 $CrO_x$ 담지촉매의 vinyl chloride 분해활성은 1% Pt 담지촉매를 제외한 다른 촉매에 비해 높았으며, $275^{\circ}C$에서 12% $CrO_x/Al_2O_3$의 반응속도를 기준으로 각 촉매의 활성을 비교시 1% $Pt/Al_2O_3$ 보다 1.2배정도 활성이 떨어지나 다른 촉매에 비하여 각각 3배에서 8배 가량 높은 활성을 나타내었다.

• 한국표면공학회지
• /
• 제44권4호
• /
• pp.125-130
• /
• 2011

$Cr_2AlC$ compounds were synthesized by hot pressing, and oxidized between 900 and $1200^{\circ}C$ in air for up to 50 hours. They oxidized to a thin $Al_2O_3$ layer containing a small amount of $Cr_2O_3$with the liberation of carbon as CO or $CO_2$ gases. The consumption of Al to form the $Al_2O_3$ layer led to the depletion of Al and enrichment of Cr just below the $Al_2O_3$ layer, resulting in the formation of an underlying $Cr_7C_3$ layer. As the oxidation temperature and time increased, the $Cr_7C_3$ oxide layer and the underlying $Cr_7C_3$ layer thickened. The oxidation resistance of $Cr_2AlC$ was generally good due to the formation of the $Al_2O_3$ barrier layer.

• Corrosion Science and Technology
• /
• 제18권1호
• /
• pp.8-15
• /
• 2019

A high-temperature gas-cooled reactor (HTGR) is recognized as the best candidate reactor for next generation nuclear reactors. Helium is used to be the coolant in the core of the HTGR with temperature expected to exceed $900^{\circ}C$ at the core outlet. Several iron- and nickel-based superalloys, including Alloy 800H, Hastelloy X, and Alloy 617, are potential structural materials for intermediate heat exchanger (IHX) in an HTGR. Oxidation behaviors of three selected alloys (Hastelloy X, Alloy 800H, and Alloy 617) were investigated at four different temperatures from $650^{\circ}C$ to $950^{\circ}C$ under helium environments with various concentrations of $O_2$ and $H_2O$. Preliminary results showed that chromium oxide as the primary protective layer was observed on surfaces of the three tested alloys. Based on results of mass gain and SEM analyses, Hastelloy X alloy exhibited the best corrosion resistance in all corrosion tests. Further details on the oxidation mechanism of these alloys are presented in this study.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.89-94
• /
• 2015

Objectives: The objective of this study was to determine characteristics of workers' exposures to airborne total and hexavalent chromium by job title in electroplating processes. Methods: Total Cr was determined through a modified method based on NIOSH Method 7024. Airborne hexavalent Cr, Cr(VI), was sampled and extracted according to NIOSH Method 7600 and analyzed at 520 nm using an ion chromatograph/visible detector. Results: The geometric mean(GM) of total Cr concentrations from all factories was $11.2{\mu}g/m^3$(GSD=4.9). The GM of Cr(VI) concentrations from all factories was $2.84{\mu}g/m$ (GSD=5.2), and the concentrations among factories were significantly different (p<0.05). The Cr(VI) levels were lower than total Cr levels. Total Cr exposure levels were highest among buffing workers ($21.6{\mu}g/m^3$), but Cr(VI) levels were highest among plating workers($4.15{\mu}g/m^3$). The concentrations of Cr(VI) and total Cr from plating tasks was highly correlated(r=0.91). Conclusions: In the electroplating industry, plating workers were mainly exposed to Cr(VI), but others were not. Oxidation-reduction states of Cr and job titles should be considered in the exposure or risk assessments of chrome electroplating factories.

• Elastomers and Composites
• /
• 제39권4호
• /
• pp.309-317
• /
• 2004

풀러렌[$C_{70}$]을 3-chloroperoxy benzoic acid, chromium (VI) oxide, benzoyl peroxide, trichloroisocyanuric acid 등의 산화제를 사용하여 마이크로파 조건에서 반응시켜 풀러렌 난화물[$C_{70}O_n$] ($n=1{\sim}3$ or n=1)을 합성하였다. 동일한 마이크로파 조건에서 여러가지 산화제와 풀러렌[$C_{70}$]의 고체상태 반응성은 3-chloroperoxy benzoic acid > chromium(VI) oxide > trichloroisocyanuric acid $\simeq$ benzoyl peroxide 순으로 증가함을 나타냈다. MALDI-TOF-MS, UV-visible, 그리고 HPLC를 사용하여 분석한 결과 생성된 풀러렌 산화물은 [$C_{70}O_n$] ($n=1{\sim}3$ or n=1)임을 알 수 있었다.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.140-147
• /
• 2004

High temperature oxidation of Fe-19Cr and Fe-19Cr-0.2Ti alloys is studied at 1173-1373 K in 16.5 kPa $O_2$ - balances $N_2$ atmosphere aimed at clarifying the effect of titanium addition. Oxidation rate of Fe-19Cr alloy was accelerated with titanium. For both alloys chromium rich $(Fe,\;Cr)_2O_3$ was formed as a major oxidation product. On Fe-19Cr-0.2Ti alloy, a thin layer composed of spinel type oxide and titanium oxide was also formed and an internal oxidation of titanium was observed. Titanium was concentrated at the oxide surface and internal oxidation zone but a small amount of titanium was also found in the intermediate corundum type $(Fe,\;Cr)_2O_3$ layer. Crystals of corundum type $(Fe,\;Cr)_2O_3$ formed on Fe-19Cr alloy are coarse but that formed on Fe-19Cr -0.2Ti alloys were fine and columnar. Reason for the difference in oxidation kinetics and crystal structure will be discussed relating to the distribution of aliovalent titanium in corundum type $(Fe,\;Cr)_2O_3$ oxide layer.

• Bulletin of the Korean Chemical Society
• /
• 제12권2호
• /
• pp.149-153
• /
• 1991

Chlorotrimethylsilane reacts with chromic anhydride to form a very reactive neutral chromium (Ⅵ) oxidizing agent. The active oxidizing species is not trimethylsilyl chlorochromate as was previously reported but chromyl chloride generated in equilibrium concentration. This oxidizing agent was proved very suitable for benzylic oxidations of toluenes and alkylbenzenes to benzaldehydes and aralkyl ketones. Dichlorodimethylsilane and trichlormethylsilane also react with chromic anhydride to form chromyl chloride in an equilibrium concentration.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.171-173
• /
• 2005

Inconel 617 is a solid solution, nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of high temperature strength and oxidation resistance. The combination of high strenth and oxidation resistance at temperatures over $1800^{\circ}F$ makes Inconel 617 an attractive material for such components as ducting, transition liners in both aircraft and gas turbine. In this study, the weldability and weldment characteristics of Inconel 617 are considered in GTAW associated with the two welding current and with back shielding gas using or not. After GTAW with 120A and 150A current, microstructures and hardness test, bending test, tensile test on room and elevated temperature for the determination of optical welding condition.