• Geotechnical Engineering
• /
• v.12 no.3
• /
• pp.109-126
• /
• 1996

In this study, the chemical fluid considered is sodium chloride sloutions. The concentrations for the sodium chloride solutions are varied from 0 to 20%. A series of lab oratory triaxial tests are performed on the cylindrical specimens of sand bentonite mixture with different (5, 10, 15%) sodium chloride content solutions. Deformation(elastic modulus, E) and strength (cohesion, c', and angle of friction, f') parameters are obtained from the triaxial tests and they are expressed as functions of conf'ming pressure and sodium chloride solution concentrations. The stress-strain-strength behavior based on the above strength parameters is introduced to the finite element method with a residual flow procedure (RFP). By integrating a slope stability (limit equilibrium) procedure in the finite element method, factors of safety with time are computed.

• Corrosion Science and Technology
• /
• v.4 no.1
• /
• pp.19-22
• /
• 2005

Two Au-Ag-Cu-Pd dental casting alloys (Au:12% and 20%) used. The test solutions used 0.9 % NaCl solution (isotonic sodium chloride solution), 0.9 % NaCl solution containing 1 % lactic acid, and 0.9 % NaCl solution containing 1 % lactic acid and 0.1 mol $dm^{-3}$ $Na_2S$. The surface of two samples in three sample solutions was not natural discoloration during one year. The alloy containing 12 % gold was easily alloyed and the composition was uniform comparing with the alloy containing 20 % gold. The rest potentials have not a little effect after three months. The kinds of metals could not definitely from the oxidation and reduction waves of metal on the cyclic voltammograms. The dissolutions of gold and palladium were 12 % Au sample in the 0.9 % NaCl solution containing 1 % lactic acid and 0.1 mol $dm^{-3}$ $Na_{2}S$. The pH of solution had an affect on dissolution of copper, and sulfur ion had an affect on dissolution of silver. The copper dissolved amount from 20 % gold sample was about 26 times comparing with that of 12 % gold sample in the 0.9 % solution containing 1 % lactic acid. Corrosion products were silver chloride and copper chloride in NaCl solution, and silver sulfide and copper sulfide in NaCl solution containing $Na_{2}S$.

• Corrosion Science and Technology
• /
• v.22 no.3
• /
• pp.137-152
• /
• 2023

Polarization behavior and corrosion inhibition of copper in acidic chloride solutions containing benzotriazole were studied. Pourbaix diagrams constructed for copper in NaCl solutions with different BTAH concentrations were used to understand the polarization behavior. Open circuit potential (OCP) depended not only on chloride concentration, but also on whether a CuBTA layer was formed on the copper surface. Only when the (pH, OCP) was located well in the CuBTA region of the Pourbaix diagram, a stable corrosion inhibiting CuBTA layer was formed, which was confirmed by X-ray Photoelectron Spectroscopy (XPS) and a long-term corrosion test. The OCP for the CuBTA layer decreased logarithmically with increasing [Cl^-] activity in the solution. A minimum BTAH concentration required to form a CuBTA layer for a given NaCl concentration and pH were determined from the Pourbaix diagram. It was found that 320 ppm BTAH solution could be used to form a corrosion-inhibiting CuBTA layer inside the corrosion pit in the sprinkler copper tube, successfully reducing water leakage rate of copper tubes. These experimental results could be used to estimate water chemistry inside a corrosion pit.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.106-110
• /
• 1995

Chloride ion is considered one of the most common culprits in the corrosion of steel in concrete. It breaks down the passive film and allows the steel to corrode actively at a high rate. The main objective of this study is to determine the critical chloride ion concentrations in the pore solutions and chloride binding effect of cement pastes made with and without fly ash. Cement pastes with water-ratio of 0.5 allowed to hydrate in sealed containers for 28 days and to express poresolution. T도 expressed pore fluids were analyzed for chloride and hydroxyl ion concentrations. It was found that the replaced cement with fly ash have little effect on Chloride binding capacity ratio.

• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.116-122
• /
• 1990

In order to improve the shelf life of Tofu, the effect of calcium chloride or acetic acid as coagulants were investigated for microbial and physicochemical changes during the storage in different kinds of soaking solution. The soaking water of Tofu prepared from calcium chloride was found to be spoiled after 15-17 hours of storage at $30^{\circ}C$, by reaching the bacteria count to 10million per ml. The shelf life of the Tofu prepared from acetic acid was better than those prepared by calcium chloride. For the effect of soaking solution on storage life, soaking Tofu in 0.1% acetic acid was found to be more effective than soaking in other solutions of 3% NaCl or 0.1% K-sorbate. The optical density of soaking solution of Tofu increased in proportion to spoilage, and in case of soaked Tofu in 3% sodium chloride and 0.1% K-sorbate solution, it greatly increased. Titratable acidity, and amino nitrogen contents in soaking solution increased as spoilage of Tofu progressed, but pH decreased the early period, one or two days, of stored Tofu and then increased.

• Journal of the Korean Chemical Society
• /
• v.17 no.1
• /
• pp.10-14
• /
• 1973

The relative viscosities ηr of anilinium chloride solutions in a series of isopropanol-water mixtures have been determined at $20^{\circ}$, $30^{\circ}$and $40^{\circ}$, using Ubbelohde-type viscometers. The viscosity data have been interpreted in terms of viscosity A-and B-coefficients calculated from the Jones-Dole equation,${\eta}{\tau}=1+AC^{1/2}+BC$. The energy of activation for viscous flow have also been calculated according to the concept of rate processes. The results indicate that at $0.10{\sim}0.15$ mole fraction isopropanol the maximum structuredness of water gives a minimum values of viscosity A-and B-coefficients, and that anilinium chloride belongs to the borderline case in respect of the structure-making or structure-breaking effects on water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.1
• /
• pp.82-91
• /
• 1995

This study was designed to elucidate the effects of lysozyme, clupeine, sucrose, and sodium chloride on the foaming properties of egg albumen and podered beef plasma. Surface tensions of egg albumen(5%, w/w) and powdered beef plasma(5%, w/w) adding to lysozyme, clupeine, sucrose, and sodium chloride were 46.8$\pm$0.379~52.4$\pm$ 0.404dyne/cm(control, 51.5$\pm$0.416dyne/cm) and 54.6$\pm$0.231~60.7$\pm$0.467dyne/cm(control, 53.9$\pm$0.153dyne/cm), respectively. Turbidities of the solutions were 77.0$\pm$0.058~97.9$\pm$ 0.058(control, 91.2$\pm$0.153) and 90.3$\pm$0.058~98.5$\pm$0.115 (control, 82.7$\pm$0.100), respectively. Surface hydrophobicities of the solutions were 524~811(control, 485) and 5102~ 7128(control, 4665), respectively. The solution with high hydrophobicity revealed good foaming properties. Analysis of egg albumen and powdered beef plasma foam by electrophoresis showed that lysozyme was retained for a long time in foam. The optimal concentraitons of lysozyme and clupeine for foaming properties were 0.5% and 0.3% in egg albumen(5%, w/w) and 0.5% and 0.5% in powdered beef plasma(5%, w/w), respectively. In case of egg albumen, sodium chloride dominantly enhanced the action of clupeine. The addition of 0.3% clupeine with sodium chloride(2.0M) to egg albumen(5%, w/w) increased overrun and foam stability by 119.5% and 70.9%, respectively. The addition of 0.5% clupeine to powdered beef plasma(5%, w/w) also increased overrun and foam stability by 43.7% and 127.3%, respectively.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.398-402
• /
• 1975

The light scattering studies of the aqueous solution of dodecyl pyridinium chloride (DPC) and tetradecyl pyridinium chloride (TPC) over the concentration range of 0~70 mM revealed that there exists a so-called 2nd critical micelle concentration (cmc) at about 43 mM and 8 mM respectively in addition to their 1st cmc at 17 mM and 3.5 mM. The 2nd cmc was greatly influenced by additives KCl, which lowered the 2nd cmc. The micelle molecular weight of DPC and TPC solutions at 1st cmc were 20800 and 15600 and the degree of ionization of their micelles at 1st cmc were 0.092 and 0.226 respectively.

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.343-352
• /
• 1998

This experiment was performed to investigate effects of zinc containing solution on the major normal flora Staphylococccus aureus, Streptococus mutans and Candida albicans and to observe the variation according to anionic change and concentration difference. Zinc chloride, zinc iodide and zinc acetate solution were added to werially diluted broth culture so that each final concentration might be 0.25%, 0.5%. 1%. After that, 100ul of each aliquot was spreaded on each selective media plate( Mannitol Salts Agar plate for Staphylococcus aureus, Mitis Salivarius Agar plate for Streptococcus mutans and Sabouraud Destrose Agar plate for Candida albicans). The % killing was calculated bu CFU count after incubation under the appropriate condition. 1. zinc iodide, zinc chloride, and zinc acetate solutions showed inhibitory effects on Staphylococcus aureus, Streptococcus mutans and Candida albicans. 2. The inhibitory effects on Staphylococcus aureus were ranked in order of ainc iodide, zinc chloride and zinc actate. 3. The inhibitory effects on Streptococcus mutans were ranked in orfer of zinc iodide, zinc chloride and zinc acetate. 4. the inhibitory effects on Candida albicans showed no difference among zinc iodide, zinc chloride and zinc acetate. 5. The inhibitory effects of zinc chloride and zinc acetate on Staphylococcus aureus and Streptococcus mutnas showed increasing pattern as the concentration increase. But the inhibitory effects of zinc iodide on Staphylococcus aureus and Streptococcus mutans showed no apparent difference according to concentrations and it was the case with the inhibitory effects of zinc iodide, zinc chloride and zinc acetate on Candida albicans.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.100-109
• /
• 2002

Significant damage to concrete results from the intrusion of corrosive solutions, for example, dissolved chlorides corrode reinforcing steel and cause spatting. Effectively blocks the penetration of these solutions will eliminate or greatly reduce this damage and lead to increased durability. This study is to investigate the effects of pozzolanic admixtures, fly ash and silica fume, and a blast furnace slag on the chloride ion penetration of concretes. The main experimental variables wore the water-cementitious material ratios, the types and amount of admixtures, and the curing time. And it is tested for the porosity and pore size distributions of cement paste, chloride ion permeability based on electrical conductance, and 180-day ponding test for chloride intrusion. The results show that the resistance of concrete to the penetration of chloride ions increases as the w/c was decreased, and the increasing of curing time. Also, concrete with pozzolans exhibited higher resistance to chloride ion penetration than the plain concrete. The significant reduction in chloride ion permeability(charge passed) of concrete with pozzolans due to formation of a discontinuous macro-pore system which inhibits flow. It is shown that there is a relationship between chloride ion permeability and depth of chloride ion penetration of concrete, based on the pore structure (porosity and pore size distributions) of cement paste.