• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.263-271
• /
• 1995

Chemical assessment of soil pollution with heavy metals was made by analyzing the changes in pH, ionic strength, cationic concentration and chemical species in the soil solution. Saturated pastes of the unpolluted soils were made by adding solutions containing Cu or Cd and the final Cu or Cd concentrations were in the range of 0 to 400 mg/kg. After equilibrating for 24 hours at $25^{\circ}C$, the soil solution was extracted from the saturated pastes by the vacuum extraction method and analyzed for pH, electrical conductivity, Cu, Cd, cations and inorganic ligands. Chemical species in soil solution were calculated by the GEOCHEM-PC program employing the input variables of pH, ionic strength(${\mu}$), molar concentrations of cations and ligands. Increasing Cu or Cd additions lowered pH of the soil solution but increased concentrations of Ca, Mg and K resulting in increases of ${\mu}$ of the soil solution. Effects of Cu on lowering pH and increasing ${\mu}$ were greater than those of Cd. Concentrations of Cu or Cd in soil solution were relatively very low as compared to those of additions, but increased linearly with increasing additions representing that concentrations of Cu were higher than those of Cd. At 400 mg/kg additions, concentrations of Cu were in the range of 0.51 to 11.70 mg/L but those of Cd were 34.4 to 88.5 mg/L. Major species of Ca, Mg and K were free ions and these species were equivalent to greater than 95 molar % of the existing respective molar concentrations. These cationic species were not changed by Cu or Cd additions. Major species of Cu in lower pH soils such as SiCL and SL were free $Cu^{2+}$ (>95 molar %), but those in LS having a higher pH were free $Cu^{2-}$ and Cu-hydroxide complex. At 100 mg Cu/kg treatment, $Cu^{2+}$ and Cu-hydroxide complex were equivalent to 73 and 22.4 molar %, respectively. These respective percentages were decreased and increased correspondingly with increasing Cu treatments. Major species of Cd in soil solution were free $Cd^{2+}$ and Cd-chloride complex, representing 79 to 85 molar % for $Cd^{2+}$ and 13 to 20% for Cd-chloride complex at 10 mg Cd/kg treatment. With increasing Cd additions to 400 mg/kg, $Cd^{2+}$ species decreased to $40{\sim}47%$ but Cd-chloride complexes increased to $53{\sim}60$ molar %. These results demonstrated that soil contamination with heavy metals caused an adverse effect on the plant nutritional aspects of soil solution by lowering pH, increasing cations temporarily, and increasing free metal concentrations and species enough to be phytotoxic.

• Biomolecules & Therapeutics
• /
• v.10 no.2
• /
• pp.104-113
• /
• 2002

The effects of enzyme inhibitors and penetration enhancers on the permeation of leucine enkephalin (Leu-Enk) and its synthetic analog, [${D-ala}^2$]-leucine enkephalinamide (YAGFL) across the nasal, rectal and vaginal mucosae were evaluated. Enzyme inhibitors and penetration enhancers employed for Leu-Enk permeation study were amastatin(AM), thimerosal(TM) and ethylenediaminetetraacetic acid disodium salt(EDTA), and sodium taurodihydrofusidate (STDHF). Those for YAGFL permeation study were TM, benzalkonium chloride(BC) and EDTA, and STDHF, sodium deoxycholate(SDC), sodium glycholate(SGC), glycyrrhizic acid ammonium salt (GAA), L-$\alpha$-Iysophosphatidylcholine(LPC) and mixed micelle (MM, STDHF: linoleic acid = 15 mM : 5 mM). The addition of TM alone on the donor and receptor solutions for Leu-Enk permeation study across all the three kinds of mucosae failed to inhibit the degradation; it completely degraded in 6 hrs, and no permeation occurred. However, with addition of three kinds of inhibitors together, the fluxes across nasal, rectal and vaginal mucosae were $\20.7{pm}2.5$>/TEX>,$\0.3{pm}0.05$>/TEX> and $\1.4{pm}0.5$ $\mu$\mid$textrm{m}$/$\textrm{cm}^2$/hr, respectively. Moreover, the addition of STDHF in the presence of the above three inhibitors enhanced permeation across nasal, rectal and vaginal mucosae 1.3, 15 and 1.3 times, respectively. YhGFL also degraded in the donor and receptor solutions rapidly as time went. With mixed inhibitors of TM and EDTA, the percents of YAGFL remaining in the donor solutions facing nasal, rectal and vaginal mucosae were 69.7, 69.8 and 79.8%, respectively; the percent permeated increased to 10, 2.1 and 5.7%, respectively. The addition of STDHF in the presence of either BC/EDTA or TW/EDTA increased the permeation 2.2, 11.0 and 2.9 times, and 2.21, 14.0 and 2.7 times for nasal, rectal and vaginal mucosae, respectively. With SDC, SGC, GAA, LPC ud MM in the presence of TM/EDTA increased permeation; especially, they increased permeation across vaginal mucosae effectively, and the enhancement factors were 12.5, 7.6, 8.7, 5.7 and 5.5, respectively. The degradation extent of YAGFL was correlated with protein concentrations in the epidermal and serosal extracts. The flux of YAGFL across nasal mucosa increased dose-dependently.

• The Korean Journal of Pharmacology
• /
• v.2 no.1 s.2
• /
• pp.49-69
• /
• 1966

For the purpose of stydying the pharmacodynamic action of methemoglobin, the author made the following experiments: 1. Preparation of hemoglobin and methemoglobin solutions: Red cell suspension from rabbit blood was hemolysed with distilled water and then divided into two portions. One portion was dialysed through cellophane paper and made isotonic with the proper amount of sodium chloride. The second portion was treated with sodium nitrite to convert hemoglobin to methemoglobin, dialysed through cellophane paper and made isotonic. 2. The concentration of methemoglobin in solution, plasma and urine was determined by Horecker and Brackette's method, and that of hemoglobin by the cyanmethemoglobin method. 3. The concentration of methemoglobin and hemoglobin in the plasma and urine of rabbits was measured at several intervals of time after infusion of the above samples. 4. The blood pressure and respiration of rabbits were recorded on a kymograph, and the effects of the samples on them were observed. 5. The effects of the samples on the movements of the in-situ heart and the isolated intestine of rabbits were studied. 6. The kidneys of rabbits were excised 4 to 5 hours after injection of the samples, and histopathological examinations were made. These experiments revealed the following results: 1. When methemoglobin solution was allowed to stand in room air, there was no decrease in the concentration of methemoglobin. 2. When methemoglobin solution was mixed with whole blood and incubated at $37^{\circ}C$, the concentration of methemoglobin decteased gradually. 3. After the infusion of methemoglobin and hemoglobin solutions, the rate of disappearance of methemoglobin in the plasma was more rapid than that of hemoglobin in the plasma. The higher the initial concentration in the plasma, the larger was the rate of disappearance of methemoglobin. 4. The rate of disappearance of methemoglobin was exceedingly rapid for 30 minutes after the infusion. 5. The urinary excretion of methemoglobin was more rapid than that of hemoglobin. 6. It would seem that the circulating blood contains substances which are promptly mobilized in the plasma to reduce methemoglobin to hemoglobin. 7. Moderate amounts of methemoglobin solution caused some rise in the blood pressure and a transient acceleration of the respiration of the rabbits. These effects of methemoglobin were milder than those of hemoglobin. 8. The movements of the in-situ heart and the isolated intestine of rabbits were accelerated by methemoglobin. These accelerating effects were milder than those of hemoglobin. 9. In the kidneys of rabbits treated with methemoglobin solution, hyperemia of the glomeruli, cloudy swelling and hemoglobin deposit in the tubular epithelium, hemoglobin casts in the tubular lumina of the proximal tubules, and interstitial congestion were constantly observed. There was no definite difference between the histological findings in the rabbit kidneys injected with methemoglobin, and those injected with hemoglobin solutions.

• Resources Recycling
• /
• v.15 no.6 s.74
• /
• pp.33-40
• /
• 2006

Leaching behavior of copper using electro-generated chlorine was investigated in hydrochloric acid solutions. When leached copper concentration was lower than 3.6g/L, the utilization efficiency of the electro-generated chlorine was close to 100% at $10mA/cm^2,\;25^{\circ}C$, 400 rpm in 1M HCl solutions. The concentration ot the leached copper over 3.6g/L caused the electrode potential to drop quietly, leading to a change or leaching mechanism. The leaching rate oi copper began to decrease at the concentration of copper 5.2g/L. This is probably due to the formation of a layer of CuCl on Cu metal in 1M HCl solutions. The leaching rate, however, was not retarded in a solution ot high chloride concentration. The high solubility of CuCl in the solution may prevent the formation of CuCl on Cu metal.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.4
• /
• pp.336-343
• /
• 2000

Purpose: Thallous-201 chloride produced at Korea Cancer Center Hospital(KCCH) is used in detecting cardiovascular disease and cancer. Thallium impurity can cause emesis, catharsis and nausea, so the presence of thallium and other metal impurities should be determined. According to USP and KP, their amounts must be less than 2 ppm in thallium and 5 ppm in total. In this study, the detection method of trace amounts of metal impurities in $[^{201}Tl]$TICI injection with polarography was optimized without environmental contamination. Materials and Methods: For the detection of metal impurities, Osteryoung Square Wave Stripping Voltammetry method was used in Bio-Analytical System (BAS) 50W polarograph. The voltammetry was composed of Dropping Mercury Electrode (DME) as a working electrode, Ag/AgCl as a reference electrode and Pt wire as a counter electrode. Square wave stripping method, which makes use of formation and deformation of amalgam, was adopted to determine the metal impurities, and pH 7 phosphate buffer was used as supporting electrolyte. Results: Tl, Cu and Pb in thallous-201 chloride solution were detected by scanning from 300 mV to -800 mV Calibration curves were made by using $TINO_3,\;CuSO_4\;and\;Pb(NO_3){_2}$ as standard solutions. Tl was confirmed at -450 mV peak potential and Cu at -50 mV Less than 2 ppm of Tl and Cu was detected and Pb was not detected in KCCH-produced thallous-201 chloride injection. Conclusion: Detection limit of thallium and copper is approximately 50 ppb with this method. As a result of this experiment, thallium and other metal impurities in thallous-201 chloride injection, produced at Korea Cancer Center Hospital, are in the regulation of USP and KP Polarograph could be applied for the determination of metal impurities in the quality control of radiopharmaceuticals conveniently without environmental contamination.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.591-595
• /
• 2001

This study was conducted to find out the proper chemicals and doses for controlling the bulb disease of Lilium Oriental hybrids 'Capablanca' and 'Marco Polo' cultivars during storage, and to ascertain any disadvantage of the treatment on shoot growth and flower development. Bulbs of 'Casablanca' and 'Marco Polo' cultivars were dipped in some fungicide solutions, including azoxystrobin, benomyl+thiram, and prochloraz, and culture broth of antagonistic bacteria for one hour. The rot was apparently inhibited by azoxystrobin and prochloraz solution dippings and it was not by benomyl+thiram in bulbs produced domestically. To improve physiological integrity, calcium chloride was treated. However, this treatment had no positive effects on bulb rot of lily. When bulbs were dipped in one-fifth of diluted broth. But the bulb rot was inhibited effectively as compared with untreated during storage. Benomyl+thiram and that with calcium inhibited the sprouting in 'Casablanca' and 'Marco Polo' cultivars during cultivation. Calcium and benomyl+thiram treatments decreased growth of leaf and flower but with no statistically significant difference. Other fungicidal materials treated to bulbs showed no effect on vegetative growth and flower quality.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.97-104
• /
• 2004

Double-layered polysulfone composite films, containing cerium activated yttrium silicate (CAYS) as a flour, were prepared from double casting of two polymeric solutions, and their morphology and physical strength were superior to those of single-layered composites. The prepared polymeric films consist of a dense bottom layer and a CAYS-holding top layer. The former is made of coagulating the polysulfone and methylene chloride binary solution and works as a supporter to improve the composite's physical strength, while the latter holding the inorganic fluor plays a role as an active site to detect the radioactive contamination. The prepared films revealed two distinguished, but tightly attached, double layers, their attachment being identified by morphology of the interface between two layers. As prepared by water immersion coagulation, the films have highly developed macropores, compared with a dense structure in the film prepared by evaporation. In the radionuclide detection test of the CAYS-impregnated composites, the films have reliable detection capacity at a radionuclide spotting test. The double-layered composites with the dense support layer show a better stability in holding the radionuclides spotted on the surface as well as an improvement in physical strength, compared with the single-layer composites having shortcomings such as being too porous or being brittle.

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.31-36
• /
• 2012

Fresh-cut burdock roots were processed at 4 and $25^{\circ}C$, respectively. The fresh-cut burdock roots were treated with different browning inhibitors (3% citric acid, 3% sodium chloride, 0.3% cystein, and 3% sodium acetate solutions), and the changes in their quality and browning characteristics were investigated. The respiration rate and browning index of the cut roots prepared at $4^{\circ}C$ were lower than those of the cut roots prepared at $25^{\circ}C$. The soluble solid content was higher in the cut roots prepared at $4^{\circ}C$ than in those prepared at $25^{\circ}C$. The weight loss and flesh firmness were not affected by the processing temperatures. Among the browning inhibitors, 0.3% cystein showed the best browning-retarding effect. There was no difference in phenolic compound content between the browning-inhibitor-treated roots and the nontreated roots, but the PPO activity was higher in the latter than in the former. Therefore, the processing temperatures of fresh-cut burdock roots affected their quality and browning development, and the combination of a low processing temperature and the use of the proper browning inhibitor should be applied for the higher quality of the produce.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2014

To prepare the hollow fiber nanofiltration composite membranes, the poly(vinylidene fluoride) (PVDF) membrane was hydrophilized with $K_2Cr_2OH$ and $KMnO_4$ aqueous solutions. And then the composite membrane was synthesized on that membrane surfaces using interfacial polymerization with piperazine (PIP) and trimesoyl chloride (TMC). The resulting membranes were characterized in terms of the rejection and flux for NaCl, $CaSO_4$, $MgCl_2$ 100 ppm solution and 300 ppm of NaCl and $CaSO_4$ mixed solution by varying the coating time, drying time, and the concentration of the coating materials. As a result, the higher rejections were shown for $K_2Cr_2OH$ solutionas a hydrophilization material, and the flux was enhanced while the rejection reduced as the hydrophilization time is longer. Also, the rejection increased and the flux reduced as the concentrations of triethyl amine (TEA) and sodium lauryl sulfate (SLS) were higher. Typically, the rejection 50% and flux 40 LMH for NaCl 100 ppm solution, and the rejection 55% and flux 48 LMH for $CaSO_4$ 100 ppm solution were obtained for the PVDF hollow fiber composite membrane prepared with the conditions of PIP 2 wt% (Triethyl amine (TEA) 7 wt%, SLS 20 wt% mixed solution against PIP concentration) and TMC 0.1 wt%.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.365-374
• /
• 2003

Various deleterious chemicals can be introduced to existing concrete structures from various external sources. The deterioration of concrete by seawater attack is involved in complex processes due to various elements contained in seawater. In the present study, attention was paid to the formation of secondary minerals and characteristics of mineralogical and micro-structural changes involved in concrete deterioration caused by the influence of major seawater composition. The characteristics of deterioration occurred in existing concrete structures was carefully observed and samples were collected at many locations of coastal areas in Busan-Kyungnam. The petrographic, XRD, SEM/EDAX analyses were conducted to determine chemical, mineralogical and micro-structural changes in the aggregate and cement paste of samples. The experimental concrete deteriorations were performed using various chloride solutions (NaCl, CaCl, $MgCl_2$ and $Na_2SO_4$ solution. The experimental results were compared with the observation results in order to determine the effect of major elements in seawater on the deterioration. The alkalies in seawater appear to accelerate alkali-silica reaction (ASR). The gel formed by ASR is alkali-calcium-silica gel which known to cause severe expansion and cracking in concrete. Carbonation causes the formation of abundant less-cementitious calcite and weaken the cement paste. Progressive carbonation significantly affects on the composition and stability of some secondary minerals. Abundant gypsum generally occurs in concretes subjected to significant carbonation, but thaumasite ({$Ca_6/[Si(OH)_6]_2{\cdot}24H_2O$}${\cdot}[(SO_4)_2]{\cdot}[(CO_3))2]$) occurs as ettringite-thaumasite solid solution in concretes subjected to less significant carbonation. Experimentally, ettringite can be transformed to trichloroaluminate or decomposed by chloride ingress under controlled pH conditions. Mg ions in seawater cause cement paste deterioration by forming non-cementitious brucite and magnesium silicate hydrate (MSH).