• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.88-95
• /
• 1980

Red ginseng was extracted with water and analyzed for yield, saponin, pectin and other chemical composition. It was found that: (1) The total solid content in extract after 6 times of extraction was 46.8%,: including 13.6% of centrifugal residue; (2) 83.7% of total extractable solids and 86% total saponin was extracted after the initial three runs of extraction. (3) No significant changes were observed in HPLC pattern of extracted saponins over a range of extractions; (4) The ratio of centrifugal residue to total solids increased as the number of extractions increased; (5) The ratios of fat, protein, reducing sugar and pectin contents decreased with repeating extraction while those of crude fiber, total sugar and 35% alcohol insoluble residue increased when they were compared with total solids.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.183-188
• /
• 1998

The efficiency of removing cadmium, copper, and lead from a contaminated soil of abandoned metal mine was studied in a laboratory investigation where citric acid were used to extract the metal from the soil. The contamination level of Pb, Cu in the soil A were 875.5, 667.5mg/kg respectively. The mobility and bioavailability of the metals in soil were also estimated by Sequential Chemical Extractions. Citric acid were examined for its potential extractive capabilities. Concentrations of the acid examined in this study ranged from 0.025 to 0.15M. The pH of the suspensions and S/S ratio in which the extractions were performed ranged from 2.4 to 8.1, and from 2.1:1 to 20:1. Results showed that the removal of contaminant using citric acid was pH and S/S raton dependent.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.12
• /
• pp.1351-1355
• /
• 1998

A simple apparatus for adding a modifying solvent to supercritical CO2 extractant was described. Small, fixed volumes (typically 100 μL) of liquid modifying solvents were delivered during the extraction process by use of an in-line high pressure loop injector and an air pump. Without disconnecting the extraction cell from the supercritical fluid extraction system, the modifying solvent was repeatedly delivered. The solvent modification device was optimized during the extraction of carbaryl and bis(acetylacetonato) copper(Ⅱ). Extraction recoveries from spiked filter paper and soil samples ranged between 22% and 109%, depending on the analyte and matrix components. The addition of polar modifying solvents were necessary to improve the extractability of the nonpolar CO2.

• Journal of Ginseng Research
• /
• v.10 no.1
• /
• pp.80-93
• /
• 1986

The tail portion of dried 6-year old white ginseng was extracted and sugars and nitrogen compounds were also evaluated for chemical properties depending on varying conditions of extractions. The factors studied were extraction temperature in the range of 70-$100^{\circ}C$, ethanol concentration of 0-90% and the times of extractions which was taken 8 hours per each extraction in water at $80^{\circ}C$. For the effect of ethanol concentration in the extraction solvent, it was found that the amounts of free, reducing and total sugars and starch recovered in extract were almost linearly decreased along with the increase of concentration and the nonprotein nitrogen accounted over 84% of total nitrogen in extract. As ethanol concentration became increased, extractions of total nitrogen and water souluble nonprotein nitrogen were decreased especially in 90% ethanol. For the extraction temperature, all the sugar fractions with water and 70% ethanol except free sugar have tended to increase along with the temperature raised from 70 to $100^{\circ}C$ and it was found there is little changes of nitrogen compounds in the temperature range except a rapidly increase in water soulble protein at $100^{\circ}C$. For the times of extractions, showed that most of extractable compounds were extracted in 3 times of extractions with water at $80^{\circ}C$. It was shown that more than 95f) of sugars and 80% of nitrogen compounds were yielded with water extraction. Accordingly it was efficient to extract with water or 70% ethanol in 3 times in terms of !actor and energy consumption.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3855-3860
• /
• 2011

The competitive solvent extractions of alkali and alkaline earth metals by di-ionizable calix[4]arene nano-baskets were studied using nine conformers of calix[4]arene nano-baskets. The objective of this work is to assess the variation of macrocycle conformation, orientation and position of pendant moieties upon the extraction parameters (efficiency, selectivity and $pH_{1/2}$) of the complexes. The results revealed that alternation of ring conformation in calixarene scaffold affects the solvent extraction parameters towards alkali and alkaline earth metals, while changing the orientation of pendant moieties from ortho- to para- as well as cis- to trans-analogues depicted no changes in those extraction parameters.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.463-468
• /
• 2007

This study was conducted to investigate the effect of maturity scores [2 (bull), 2 (steer), 3-9 (cow)] and the number of extractions (up to 4 times) on the chemical properties of water extract from Hanwoo shank bones (arm, fore shank, round and hind shank). The turbidity, meat color (CIE L value), collagen, protein, caloric and chondroitin sulfate contents of samples were observed. The turbidity and lightness were higher for water extract of Hanwoo shank bones with a maturity score of 2 (bull and steer) than maturity scores of 3-9 (cow) (p<0.05). The turbidity and lightness of water extract from shank bones of all Hanwoo maturity scores significantly increased with the 1st and 2nd extractions, but significantly decreased with 3rd and 4th extractions (p<0.05). The collagen and protein contents were highest for water extract from Hanwoo shank bones of maturity score 2 (bull and steer) (p<0.05). The caloric and chondroitin sulfate contents were higher for water extract from Hanwoo shank bones of maturity score 2 (bull and steer) than maturity scores of 3-9 (cow) (p<0.05). As the number of extractions increased, the chondroitin sulfate content significantly decreased (p<0.05). Based on these results, differences correlating with maturity scores were found only with collagen and protein contents. Therefore, further studies should be considered to address whether different maturity scores affect the price of shank bones in the meat industry.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2677-2682
• /
• 2011

Direct nitrolysis of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3,3,1]nonane (DPT) is a feasible way to synthesize HMX, and it has multiple practical applications. In this paper, a new nitrolysis process involving the use of an $N_2O_5-HNO_3$ system catalyzed by acidic ionic liquids (AILs) was developed. The results show that [$Et_3NH$]TsO was the best catalyst among the 28 AILs used and that HMX was formed at a higher yield of 61%, compared to 45% without any AIL. Moreover, with the addition of $N_2O_5$, the yield was further increased to a maximum value of 69%. The AILs were also efficiently recovered by simple extractions without any apparent loss of catalytic activity, even after five runs.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2687-2690
• /
• 2009

Due to the importance of isoflavone content in soybean extracts, the microwave-assisted process (MAP) was compared to the conventional extraction methods. For comparison of the three methods, all extraction parameters (solvent, sample to solvent ratio, temperature, etc.) were kept the same; the microwave extractor was operated at 187.5 W with an emission frequency of 2450 MHz under atmospheric pressure conditions and the extractions were carried out at 75 ${^{\circ}C}$ for 3 min while the conventional reflux was at 75 ${^{\circ}C}$ for 3 h. Total yield and crude isoflavone content were determined by ultraviolet spectrophotometric and compared with the three methods. Results indicated that the MAP was comparable to the conventional method in its capability to extract target compounds without causing any degradation; in addition it dramatically reduced the extraction time from 3 h to a few minutes, suggesting that it can be an alternative technique to the time-consuming conventional reflux method.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.524-529
• /
• 1989

A glow discharge mass spectrometric(GDMS) analytical method was developed for direct analysis of impurities in solids. Ions extracted from a glow discharge ion source with a sample as a cathode were analyzed by a quadrupole mass filter. Ion extractions were carried out through differentially-pumped orifices biased to positive and negative potentials. Operating parameters of the glow discharge source such as discharge current, orifice-to-cathode distance, energy analyzer setting and bias voltages have been optimized. The developed GDMS was applied to the analysis of KSS copper-base alloy standards certified by Korea Standards Research Institute(KSRI). In the analysis, the reproducibility and the detection limits were estimated to be about 2.5% RSD, and in the low ppm range, respectively.