• Current Research on Agriculture and Life Sciences
• /
• v.15
• /
• pp.69-81
• /
• 1997

For the prevention of worldwide prevalent disease of nuclear polyhedrosis virus (NPV), environmental conditions and their incidence of grasserie was investigated through 57 cases of silkworm rearing from the year of 1979 to 1993 in the countries of Korea, Japan, and Philippines. Relationship between the occurrence of NPV and environmental factors were also analysed from the aspect of causal pathogenesis. Unfavorable foactors related to the prevalence of NPV disease was reconfirmed by the assay of experimental rearing. Silkworms reared on mulberry leaves or artificial diet appeared similar result on the occurrence of grasserie. Disinfection by formalin and simple sweeping or washing was not significantly different on the occurrence of NPV disease. Following insufficient ventilation on the younger larvae. from the 1st to 3rd instar, the disease by NPV at the later stage was remarkably emphasized those insidence. An experimental rearing from 1993 to 1996 demonstrated the prevention of NPV disease by simple cleaning of sweeping under the condition of air forced ventilation, the customal practice of disinfection with formalin or any other chemical agents could be omissible.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.31-36
• /
• 2008

This work was performed to evaluate the effect of membrane material and structure on fouling in a submerged membrane bioreactor(MBR). Three types of microfiltration membranes with the same pore size of 0.1 $\mu$m but different materials, polytetrafluoroethylene (PTFE), polycarbonate(PCTE) and polyester(PETE), were used. While PETE membrane exhibited the most rapid flux decline throughout the operation, PCTE and PTFE had a similar tendency with regard to permeability. Difference in permeability between PETE and the other membranes gradually decreased with time, which was probably due to chemical cleaning. The higher TOC rejection of PETE membrane could be attributable to its faster fouling, resulting from a larger amount of foulants to get attached to the membrane in a shorter time. DOC fractionation using a DAX-8 resin showed that the composition of each fraction between the supernatant and permeates did not change significantly with operation time, indicating that membrane hydrophilicity/hydrophobicity was not a dominant factor affecting to MBR fouling in this study. Compared to other membranes, the fouling of PETE membrane was more influenced by pore clogging (irreversible fouling), which would probably contribute to a higher organic rejection of the PETE membrane.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.2
• /
• pp.85-92
• /
• 2010

$SF_6$ gas has been widely used in many industrial fields as insulating, cleaning and covering gases due to its outstanding arc-extinguishing and insulating properties. However, global warming potential of $SF_6$ gas is 23,900 times more than that of $CO_2$ and it remains in the air during 3,200 years. For these reason, technological and economical effects could be expected for the separation of $SF_6$ from gas mixtures by hydrate forming process. In this study, we carried out morphological studies for the $SF_6$ hydrate crystal to understand its formation and growth mechanisms. $SF_6$ hydrate film was initially formed at the interfacial boundary between gas and liquid regions, and then subsequent dendrite crystals growth was observed. The dendrite crystals grew to the direction of gas region probably due to the guest gas concentration gradient. The detailed growth characteristics of $SF_6$ hydrate crystals such as nucleation, migration, growth and interference were discussed in this study.

• Korean Journal of Veterinary Research
• /
• v.44 no.1
• /
• pp.29-40
• /
• 2004

Because cleaning products are part of our everyday lives, it is essential that they should not present significant risks to health. However, many petrochemicals in most soaps and detergents can be absorbed through the scalp and skin and, over time, accumulate in the organs and tissues. This accumulation may result in brain, nerve, and liver damage. Therefore, it is interested in developing non-harmful detergent. According to Korea Research Institute of Chemical Technology, GC-100X may be non-harmful and non-corrosive alkaline ionic water (pH 12). It is composed of hydroxyl radicals and supplemented with xylitol. To evaluate influence of GC-100X on rats and beagles, GC-100X was diluted with distilled water (25%, 50%, and 100% solution respectively). Each of diluted GC-100X was daily treated per oral. In body weight analysis, urinary analysis, ophthalmological test and autopsy, we did not find any significance, but in serum biochemical analysis and hematological analysis, we found some significances in middle dose group compared with control group. These significances in serum biochemical analysis and hematological analysis may be not induced by GC-100X, because it was not found to be significant from control group in histopathological examination. Thus, it is concluded that NOEL(No Observed Effect Level) of GC-100X may be higher than all treatment doses used in this study, and GC-100X may be a non-toxic detergent.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.21 no.4
• /
• pp.392-402
• /
• 2014

Purpose: This study was done to investigate the status of disinfection and sterilization in healthcare facilities. Method: A survey of 193 Korean healthcare facilities was conducted from February 8 to March 7, 2013. Data were analyzed using descriptive statistics, ${\chi}^2$ test, Fisher's exact test, one-way ANOVA, Scheffe with SPSS WIN 18.0. Results: Of the healthcare facilities 93.2% had specific guidelines for disinfection/sterilization, but only 47.9% had a committee on disinfection/sterilization for decision-making, less than half (42.7%) conducted regular monitoring of actual practices, while 83.9% had established procedures for recovery in case of problems with the disinfection process and 89.0% kept records and archives of disinfection practices. Cleaning process, selection of chemical disinfectants and process of disinfection and sterilization were found to be inadequate in some healthcare facilities. Perception score for adequacy of medical instruments was 8.10, environmental disinfection was 7.20, and sterilizer management was 8.45 out of a possible 10. Conclusion: Compared to larger institutions, smaller healthcare facilities had less effective disinfection and sterilization management systems, while some facilities showed inadequate practices for medical equipment and general sterilization. Better academic and state-level support is recommended for smaller facilities in order to establish a better system-wide management system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.150.1-150.1
• /
• 2014

Showerhead is used as a main part in the semiconductor equipment. The face plate flatness should remain constant and the cleaning performance must be gained to keep the uniformity level of etching or deposition in chemical vapor deposition process. High operating temperature or long period of thermal loading could lead the showerhead to be deformed thermally. In some case, the thermal deformation appears very sensitive to showerhead performance. This paper describes the methods for robust design using computational fluid dynamics. To reveal the influence of the post distribution on flow pattern in the showerhead cavity, numerical simulation was performed for several post distributions. The flow structure appears similar to an impinging flow near a centered baffle in showerhead cavity. We took the structure as an index to estimate diffusion path. A robust design to reduce the thermal deformation of showerhead can be achieved using post number increase without ill effect on flow. To prevent the showerhead deformation by heat loading, its face plate thickness was determined additionally using numerical simulation. The face plate has thousands of impinging holes. The design key is to keep pressure drop distribution on the showerhead face plate with the holes. This study reads the methodology to apply to a showerhead hole design. A Hagen-Poiseuille equation gives the pressure drop in a fluid flowing through such hole. The assumptions of the equation are the fluid is viscous-incompressible and the flow is laminar fully developed in a through hole. An equation can be expressed with radius R and length L related to the volume flow rate Q from the Hagen-Poiseuille equation, $Q={\pi}R4{\Delta}p/8{\mu}L$, where ${\mu}$ is the viscosity and ${\Delta}p$ is the pressure drop. In present case, each hole has steps at both the inlet and the outlet, and the fluid appears compressible. So we simplify the equation as $Q=C(R,L){\Delta}p$. A series of performance curves for a through hole with geometric parameters were obtained using two-dimensional numerical simulation. We obtained a relation between the hole diameter and hole length from the test cases to determine hole diameter at fixed hole length. A numerical simulation has been performed as a tool for enhancing showerhead robust design from flow structure. Geometric parameters for the design were post distribution and face plate thickness. The reinforced showerhead has been installed and its effective deposition profile is being shown in factory.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.441-450
• /
• 2011

This study investigated potential damages and conservation methods for the ceramics (without glaze) by examination of physical and chemical effects from the burial environments. For this study, pottery samples excavated from Daejeon Hakha, Asan Eumbong, Hwasung Sogeunsan and Kongju Haengbokdosi were examined with released ions and extraction through desalination. The result showed that the ion inflow into the ceramics was dependent upon the porosity and the absorption of ceramics. The high temperature fired ceramics (over $1,000^{\circ}C$) have low porosity and absorption, therefore almost no salt infiltration during the burial period. However, low temperature fired ceramics (under $800^{\circ}C$) have high porosity and absorption, and most of salts were removed during the desalination. The 40 to 60% of salts were removed in two days and 60 to 80% of slats were released in a week. Furthermore, fertilizer residues such as $K_2SO_4$, in soils were detected in the ceramcis. Also the characteristics of buried soil affected ion infiltration into ceramics. Ceramics buried in sandy soil had relatively less ion contents from buried environments than those in clayey soil. Therefore, low temperature fired ceramics could do not only cleaning but also desalination if it is necessary, and the period could be decided to the condition of ceramics.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.28-34
• /
• 2005

The aim of this article is to assess the application characteristics of the site by remediating oil-contaminated area using DSB (Deep-site Biopile) system. In the contaminated area, the soil was composed of penetrable sand and the leaked oil was spread widely (total 7,201 cubic meters) through 2.5 meter deep underground water flow. DSB system was operated for 30 minutes intervals for 24 hours in a day (30 minutes opεration and 30 minutes stop). To check contamination level change in the contaminated area after DSB system was operated, samples were taken. The result from the site shows that BTEX/TPH contamination level was dropped 50% after 30-day operation of DSB system, and that contamination level was dropped below contamination level check standard after 165 days and the remediation was completed. Unlike traditional biological remediation methods DSB system could efficiently process soil and water which were contaminated by high levels of oil compounds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• Safety and Health at Work
• /
• v.4 no.3
• /
• pp.142-148
• /
• 2013

Background: To elucidate the relationship between seven occupational dermatoses (ODs) and 20 types of work in Greece. Methods: This was a prevalence epidemiologic study of certain ODs among 4,000 workers employed in 20 types of enterprise, in 104 companies, in 2006-2012, using data from company medical records, questionnaires, occupational medical, and special examinations. The ${\chi}^2$ test was applied to reveal statistically significant relationships between types of enterprises and occurrence of ODs. Results: A high percentage (39.9%) of employees included in the study population suffered from ODs. The highest prevalence rates were noted among hairdressers (of contact dermatitis: 30%), cooks (of contact dermatitis: 29.5%), bitumen workers (of acne: 23.5%), car industry workers (of mechanical injury: 15%), construction workers (of contact urticaria: 29.5%), industrial cleaning workers (of chemical burns: 13%), and farmers (of malignant tumors: 5.5%).We observed several statistical significant correlations between ODs (acute and chronic contact dermatitis, urticaria, mechanical injury, acne, burns, skin cancer) and certain types of enterprises. There was no statistically significant correlation between gender and prevalence of ODs, except for dermatoses caused by mechanical injuries afflicting mainly men [${\chi}^2(1)=13.40$, p < 0.001] and for chronic contact dermatitis [${\chi}^2(1)=5.53$, p=0.019] afflicting mainly women. Conclusion: Prevalence of ODs is high in Greece, contrary to all official reports by the Greek National Institute of Health. There is a need to introduce a nationwide voluntary surveillance system for reporting ODs and to enhance skin protection measures at work.