• 제목/요약/키워드: chemical bond loss

검색결과 36건 처리시간 0.023초

폴리머 시멘트 모르타르의 철근부착력 평가를 위한 인발실험과 모델링 (Bonding Properties of Steel-reinforced Polymer Cement Mortar Evaluated by Pull-off Test and FEM Modeling)

  • 박동천;노부토시 요네다;조봉석
    • 한국건축시공학회지
    • /
    • 제14권3호
    • /
    • pp.216-222
    • /
    • 2014
  • 단면수복 보수를 실시한 RC조 부재의 내하성능 회복을 예측 평가하기 위하여 FEM해석이 빈도 높게 사용되고 있으나 부착에 대한 정보가 부족하여 정확도 있는 예측이 힘든 실정이다. 수치해석의 입력데이터가 되는 철근과 폴리머 시멘트 모르타르의 부착특성을 평가하기 위하여 폴리머 시멘트 모르타르를 이용한 일련의 인발실험을 실시하였다. 동시에 범용성있는 해석결과 활용을 위하여 부착특성을 부착강성과 부착강도로 정의하고 비선형 FEM 감도 역해석을 실시하였다. 결과를 요약하면 보수재료의 화학적 부착보다 물리적 부착이 지배적이며 폴리머 분말수지의 함유에 의해 다소 부착계면의 성능이 저하하는 것을 알 수 있었다. 부착계면의 물성은 강성과 강도로 구분하여 모델화하는 것이 합리적인 것으로 사료된다.

열철리에 따른 Epoxy 복합재료의 표면 소수성증가에 관한 해석 (Analyses on the Increment of Surface Hydrophobicity of Epoxy Composites by Thermal Treatment)

  • 임경범;이백수;정무영;이덕출
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권4호
    • /
    • pp.153-160
    • /
    • 2001
  • In order to analyze the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature. Then, the degradation process was evaluated by comparing contact angle, surface potential, surface resistivity, and XPS. The experimental results showed that the amount of weight loss, contact angle, surface potential and surface resistivity increased up to 200 $^{\circ}C$ as a function of temperature. These phenomena show the existence of hydrophobic surface. With the change to the hydrophobic surface and the electrical potential and resistivity on FRP surface increased. In XPS to analyze surface chemical structures, the increased hydrophobicity in thermal increase of unsaturated double bond in carbon chains. Aslo, thermal treatment caused the discoloration on the point of treated surface. These phenomena were attributed to the generations of ether group.

  • PDF

실리카-타이타니아 하이브리드 코팅막의 제조 및 특성평가 (Fabrication and characterization of silica-titania hybrid film using silane treated $TiO_2$ sol)

  • 한동희;강동준;김석준;강동필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.553-554
    • /
    • 2007
  • By sol-gel method, we have fabricated silica-titania hybrid film using silane treated colloidal $TiO_2$ and characterized the film through FT-IR, TGA, UV-VIS and AFM. The silica-titania hybrid film showed Ti-O-Si chemical bond at FT-IR peak of $910{\sim}940cm^{-1}$. The fabricated hybrid film showed thermal stability of around $350^{\circ}C$(5wt% loss temperature) and transparency more than 90%. In addition, the good surface smoothness was confirmed by AFM. Therefore, the silica-titania hybrid film with outstanding properties can be potential for application in electronics and displays.

  • PDF

Aging Effect of Poly(vinyl alcohol) Membranes Crosslinked with Poly(acrylic acid-co-maleic acid)

  • Rhim Ji Won;Hwang Ho Sang;Kim Dae Sik;Park Ho Bum;Lee Chang Hyun;Lee Young Moo;Moon Go Young;Nam Sang Yong
    • Macromolecular Research
    • /
    • 제13권2호
    • /
    • pp.135-140
    • /
    • 2005
  • Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid-co-maleic acid) (PAM) were prepared to investigate the effect of aging on their morphology by swelling them for up to 7 days. PAM was used both as a crosslinking agent and as a donor of the hydrophilic-COOH group. A $30 wt\%$ weight loss of the dry membrane was observed in the swelling test after 6 days. The surface of the membrane was dramatically changed after the swelling test. The surface roughness of the PVA/PAM membrane was increased, as determined by atomic force microscopy (AFM). The swelling loosened the polymer structure, due to the release of the unreacted polymer and the decomposition of the ester bond, thereby resulting in an increase in the free volume capable of containing water molecules. The water molecules present in the form of free water were determined by differential scanning calorimetry (DSC). The fraction of free water increased with increasing swelling time. The swelling of the membrane may provide space for the transport of protons and increase the mobility of the protonic charge carriers. The proton conductivity of the membranes measured at T= 30 and $50^{\circ}C$ was in the range of $10^{-3} to 10^{-2} S/cm$, and slightly increased with increasing swelling time and temperature.

Preparation of Pseudotetragonal $ZrO_{0.75}S$ and Its Electric Responses on Temperature and Frequency Related to Microstructural Relaxation

  • 로영아;김성진;이유경;김자형
    • Bulletin of the Korean Chemical Society
    • /
    • 제22권11호
    • /
    • pp.1231-1235
    • /
    • 2001
  • Pseudotetragonal ZrO0.75S whose space group is P212121 was synthesized and the cell dimensions were a=5.110(2) $\AA$, b=5.110(7) $\AA$, and c=5.198(8) $\AA.$ The space group P212121 seems to be resulted from lowering the symmetry of cubic ZrOS structure with P213 space group by lattice distortion due to the oxygen defects. In the distorted structure, bond shortening between metal-nonmetal by reduction of cell volume and alternation of Zr-Zr distance were observed. Dielectric constant and loss data of the bulk material in temperature range -170 to 20 $^{\circ}C$ and frequency range 50 Hz to 1 MHz showed that there was dielectric transition at around -70 $^{\circ}C$ originated from the relaxation of Zr-S segment. Comparing with ZrO2 exhibited the dielectirc constants, 9.0 at room temperature, ZrO0.75S showed high dielectric constant, k = 200.2 at 100 kHz. The activation energy of relaxation time due to dielectric relaxation of Zr-S was 0.47 eV (11.3 kcal/mole). According to the impedance spectra, ZrO0.75S showed more parallel circuit character between the resistance and capacitance components at the temperature (-70 $^{\circ}C)$ that the Zr-S dielectric relaxation was observed.

A Study on the Thermal and Chemical Properties of Carbon Nanotube Reinforced Nanocomposite in Power Cables

  • Yang, Sang-Hyun;Jang, Hyeok-Jin;Park, Noh-Joon;Park, Dae-Hee;Yang, Hoon;Bang, Jeong-Hwan
    • Transactions on Electrical and Electronic Materials
    • /
    • 제10권6호
    • /
    • pp.217-221
    • /
    • 2009
  • The use of the carbon nanotube (CNT) is superior to the general powder state materials in their thermal and chemical properties. Because its ratio of diameter to length (aspect ratio) is very large, it is known to be a type of ideal nano-reinforcement material. Based on this advantage, the existing carbon black of the semiconductive shield materials used in power cables can acquire excellent properties by the use of a small amount of CNTs. Therefore, we fabricated specimens using a solution mixing method. We investigated the thermal properties of the CNT, such as its storage modulus, loss modulus, and its tan delta using a dynamic mechanical analysis 2980. We found that a high thermal resistance level is demonstrated by using a small amount of CNTs. We also investigated the chemical properties of the CNT, such as the oxidation reaction by using Fourier transform infrared spectroscopy (FT-IR) made by Travel IR. In the case of the FT-IR tests, we searched for some degree of oxidation by detecting the carboxyl group (C=O). The results confirm a tendency for a high cross-linking density in a new network in which the CNTs situated between the carbon black constituent molecules show a bond using similar constructive properties.

Bacillus subtilis JW-1 균주가 생산하는 bacilysin의 풋마름병 억제 효과 및 특성 (Isolation and characterization of bacilysin against Ralstonia solanacearum from Bacillus subtilis JW-1)

  • 김신덕
    • 미생물학회지
    • /
    • 제54권2호
    • /
    • pp.136-139
    • /
    • 2018
  • 풋마름병 균에 대해 강한 저해활성을 갖는 활성물질 Compound S와 conversion product인 compound S'이 Bacillus subtilis JW-1 배양액에서 일련의 크로마토그래피 방법으로 분리 정제되었고, $^1H$ NMR, $^{13}C$ NMR, $^1H-^1H$ COSY와 HMBC 등의 spectra 분석에 의해 구조가 alanyl-L-${\beta}$-(2,3-epoxycyclohexyl-4-one)alanine와 alanyl-L-${\beta}$-(2,3-dihydroxycyclohexyl-4-one) alanine로 각각 동정되었다. Compound S는 $G^+$, $G^-$ bacteria, yeast와 Candida albicans 등에 대해 광범위한 antimicrobial activity를 나타내며, conversion product의 활성 상실을 통해 intact oxirane ring이 Compound S의 활성에 필수적임이 밝혀졌다.

폐 FRP 선박에서 분리하여 얻은 F섬유의 염기성 용액에서의 강도저하 (Strength toss of F-Fiber Obtained from Recycling FRP Ship in a Basic Solution)

  • 이승희;김용섭;윤구영
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제11권1호
    • /
    • pp.42-45
    • /
    • 2008
  • FRP 선박에서 발생하는 폐FRP를 처리하는 방법으로 분쇄하지 않고 판상으로 박리(剝離)하는 것을 제시한 바 있다. 폐 FRP에서 분리한 층상의 로빙층으로부터 얻은 F섬유는 FRP제조시 사용하였던 수지를 포함하여 원 유리섬유에 비해 그 인장강도가 우수하다(90% 이상). F섬유의 SEM 이미지로 많은 수지의 존재를 확인하였다. F섬유의 활용성을 건축자재에서의 대체물로 가정하고 염기성 용액(NaOH+KOH)에서의 강도를 측정하였다. 이 때 일어날 수 있는 반응 메카니즘은 유리섬유의 Si-O-Si결합 조직을 수산기 이온($OH^-$)이 공격하는 것으로 보았다. 측정된 인장강도 변화에 대해 $r^2$=96%로 맞추어 얻은 시뮬레이션 그래프로 반응 메카니즘을 추정할 수 있었다. 반응 초기에는 속도적인 반응에 의해 급격한 강도저하를 보이나 30일 이후에는 수산기 이온의 확산에 의존하는 패턴으로 강도가 저하되었다. 이는 앞서 보고된 AR유리에 대한 강도저하와 유사한 결과이며, 그래프를 외연하여 F섬유의 수명을 예측할 수 있다.

  • PDF

50 nm 이상의 CMOS 기술에 이용되는 Spin-on Dielectric 박막 형성과 그 특성에 미치는 전구체의 영향 (The Effects of Precursor on the Formation and Their Properties of Spin-on Dielectric Films Used for Sub-50 nm Technology and Beyond)

  • 이완규
    • 한국진공학회지
    • /
    • 제20권3호
    • /
    • pp.182-188
    • /
    • 2011
  • 탄소가 없는 폴리실라잔 계와 탄소가 함유된 폴리메틸 실라잔 계 전구체를 실리콘 기판에 스핀코팅하고 $150^{\circ}C$, $400^{\circ}C$, $850^{\circ}C$에서 열처리하여 형성된 박막의 물리적 화학적 특성을 평가하였다. 프리에 변환 적외선 분광, 수축 율, 갭-충진, 식각속도 등을 평가하여 박막형성과 형성된 박막의 물리화학적 특성에 미치는 탄소의 영향을 고찰하였다. 탄소함유 전구체는 (탄소가 없는 전구체보다) $400^{\circ}C$에서 질소, 수소, 탄소의 휘발량이 더 적고 산소 흡수량이 더 적어서 (15.6%)보다 낮은 14.5% 두께 수축을 나타내었으나, $800^{\circ}C$에서는 휘발 량이 더 많고 산소 흡수량도 더 많아져 (19.4%)보다 높은 37.4% 두께 수축을 나타냈다. 프리에 변환 적외선 분광분석결과, 전구체내의 탄소는 Spin-on dielectric (SOD) 박막으로 하여금 Si-O 결합형성을 적게, 박막특성을 불균일하게, 그리고 화학 용액에 더 빨리 식각되도록 만들었다.

Vicinal Oxime 리간드의 새로운 구리(II) 착물에 대한 합성, 특성 및 ESR 연구 (Synthesis, Characterization and ESR Studies of New Copper(II) Complexes of Vicinal Oxime Ligands)

  • El-Tabl, Abdou S.;Shakdofa, Mohamad M.E.;El-Seidy, Ahmed M.A.
    • 대한화학회지
    • /
    • 제55권4호
    • /
    • pp.603-611
    • /
    • 2011
  • Ethoxylacetyl oxime 리간드 [HL, (1) 및 $H_2L^1$, (3)]와 아세트산 구리(II) 일수화물을 반응시켜 팔면체 및 사각평면착물을 각각 얻었다. 이들 착물을 원소분석, IR 및 UV-Vis 스펙트럼, 자기수자율, 전기전도도 및 ESR 스펙트럼으로 조사하였다. DMF에서 이들 착물의 몰전기전도도 측정한 결과 비이온성을 보였다. 실온 및 77 K에서 [$(L)_2Cu(H_2O)_2$], (2) 착물의 ESR 스펙트럼은 배위결합성을 갖는 축대칭($d_{x2-y2}$)의 특성을 보이며, 또한 전형적인 쌍극자 상호작용에 의해 큰 띠나비를 갖는다. 그러나 착물 [$(L^1)Cu$], (4)는 고체상태에서 큰 띠넓임으로 인해 초미세 갈라짐이 관찰되지 않았는데, 이는 구리(II) 결합자리들 사이의 스핀-교환 상호작용에 의한 것으로 확인되었다. 실온에서 도포된 구리(II) 착물의 스펙트럼은 배위된 질소원자로 인해 극초미세 갈라짐을 보였다. 또한 이 물질은 공유 결합성을 갖는 축형태($d_{x2-y2}$)의 특성을 보이고, 구리(II) 이온의 환경은 기본적으로 사각-평면 배열을 갖는다. 77 K의 얼어있는 메탄올에서 [$(L_1)Cu$], (4)의 스펙트럼은 이합체 화합물의 삼중항 상태의 특성을 보이며, 두 구리(II) 이온 중심 사이의 거리를 계산한 결과 4.8 이다.