• 제목/요약/키워드: chemical absorption

검색결과 2,184건 처리시간 0.055초

Synthesis and Properties of Conjugated Polycarbosilanes with 1,4-Bis(thiophene or phenylene)-buta-1,3-diyne

  • 서일권;박영태;김용록
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권6호
    • /
    • pp.677-682
    • /
    • 1999
  • Conjugated polycarbosilanes with diacetylene and aromatic groups of thiophene or phenylene simultaneously present in the polymer backbone such as poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(dimethylsilane)], poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(diphenylsilane)], poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(dimethylsilane)],and poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(diphenylsilane)] have been prepared. The characteristic C=C stretching frequencies appear at 2177-2179㎝-1 in the IR spectra of the polymers. The molecular weights of these polymers were detemined by GPC. All of these materials are soluble in organic solvents such as THF and chloroform, and thermally stable up to 200℃ in general without any weight loss under nitrogen. The prepared materials in THF solvent show a maximum absorption peak in the range of 334-356 nm with a molar absorptivity of 10³∼10ⁿ(n=5)L/(cm·mol) in the UV-visible absorption spectra. A maximum emission peak in the range of 403-550 nm is also observed in the fluorescence emission spectra. Both absorption and emission spectra strongly indicate that the obtained polycarbosilanes contain the new conjugated systems along the polymer main chain.

Oscillator Strengths and Intensity Parameters of Ln(III) Complexes with 12-Crown-4 and 15-Crown-5 Ethers in Acetonitrile (Ln = Ho and Er)

  • 강준길;윤수경;김은정;김종구;김윤두
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권3호
    • /
    • pp.232-237
    • /
    • 1995
  • The absorption spectra of holmium nitrate and erbium nitrate and the difference absorption spectra of their complexes with crown ethers were measured in acetonitrile. The crown ethers used in this study are 12-crown-4 and 15-crown-5. The oscillator strengths for the 4f→4f multiplet-to-multiplet transitions are empirically determined from the absorption spectra in combination with the difference spectra. The intensity parameters Ωλ (λ=2, 4, 6) for the systems are also evaluated by applying the Judd-Ofelt theorem to the observed oscillator strengths. The values of the intensity parameters are compared and discussed to investigate the sensitivity of the intensity parameters to the ligand environment.

In situ Structural Investigation of Iron Phthalocyanine Monolayer Adsorbed on Electrode Surface by X-ray Absorption Fine Structure

  • 김성현;;강광훈
    • Bulletin of the Korean Chemical Society
    • /
    • 제21권6호
    • /
    • pp.588-594
    • /
    • 2000
  • Structural changes of an iron phthalocyanine (FePC) monolayer induced by adsorption and externally applied potential on high area carbon surface have been investigated in situ by iron K-edge X-ray absorption fine structure (XAFS) in 0.5 M $H_2S0_4.$ Fine structures shown in the X-ray absorption near edge structure (XANES) for microcrystalline FePC decreased upon adsorption and further diminished under electrochemical conditions. Fe(II)PC(-2) showed a 1s ${\rightarrow}$ 4p transition as poorly resolved shoulder to the main absorption edge rather than a distinct peak and a weak 1s ${\rightarrow}$ 3d transition. The absorption edge position measured at half maximum was shifted from 7121.8 eV for Fe(lI)PC(-2) to 7124.8 eV for $[Fe(III)PC(-2)]^+$ as well as the 1s ${\rightarrow}$ 3d pre-edge peak being slightly enhanced. However, essentially no absorption edge shift was observed by the 1-electron reduction of Fe(Il)PC(-2), indicating that the species formed is $[Fe(II)PC(-3)]^-$. Structural parameters were obtained by analyzing extended X-ray absorption fine structure (EXAFS) oscillations with theoretical phases and amplitudes calculated from FEFF 6.01 using multiple-scattering theory. When applied to the powder FePC, the average iron-to-phthalocyanine nitrogen distance, d(Fe-$N_p$) and the coordination number were found to be 1.933 $\AA$ and 3.2, respectively, and these values are the same, within experimental error, as those reported ( $1.927\AA$ and 4). Virtually no structural changes were found upon adsorption except for the increased Debye-Wailer factor of $0.005\AA^2$ from $0.003\AA^2.$ Oxidation of Fe(II)PC(-2) to $[Fe(III)PC(-2)]^+$ yielded an increased d(Fe-Np) (1 $.98\AA)$ and Debye-Wailer factor $(0.005\AA^2).$ The formation of $[Fe(II)PC(-3)]^-$, however, produced a shorter d(Fe-$N_p$) of $1.91\AA$ the same as that of crystalline FePC within experimental error, and about the same DebyeWaller $factor(0.006\AA^2)$.

제올라이트가 도포된 실리카-세라믹 제습제의 특성 (A Study on the Characterizations of Silica-Ceramic Paper Dehumidifiers Impregnated with Zeolites)

  • 정석용;이수출;채호진;이수재;박정제;안영수;김홍수;김재창
    • 청정기술
    • /
    • 제14권1호
    • /
    • pp.40-46
    • /
    • 2008
  • MCM 48, USY, beta 등과 같은 제올라이트를 세라믹종이에 실리카와 함께 도포하여 제습소자를 제조하였고, $H_2O$ 흡수 및 재생에 대한 평가를 고정층반응기에서 실시하였다. 제올라이트가 도포된 제습소자의 $H_2O$ 흡수력은 제올라이트가 도포되지 않은 제습소자보다 약 $1.5{\sim}2$배 가량 높은 것을 볼 수 있었다. 특히 콜로이드 실리카와 MCM 48을 도포한 제습소자는 약 42.1g $H_2O/g$ absorbent의 매우 우수한 제습 능력을 보여 주었다. 이러한 결과는 넓은 비표면적과 큰 기공부피를 가지고 있는 제올라이트에 의해 $H_2O$를 흡수할 수 있는 실리카 겔이 함침될 수 있는 공간이 증가하고 이에 따른 $H_2O$의 흡수량도 증가하는 것으로 판단된다. 또한 제올라이트가 도포된 제습소자는 $80^{\circ}C$의 재생 온도에서도 쉽게 $H_2O$가 탈착되고, 이 때 탈착된 $H_2O$의 양은 제습소자가 흡수한 $H_2O$의 양과 동일하였다. 반복순환실험을 통한 $H_2O$의 흡수력 감소는 발견되지 않았고 초기 흡수력이 유지되었다.

  • PDF