• Journal of Information Technology Services
• /
• v.21 no.5
• /
• pp.65-79
• /
• 2022

The smart factory has spread to small and mid-size enterprises (SMEs) under the leadership of the government. Smart factory consists of a work area, an operation management area, and an industrial control system (ICS) area. However, each site is combined with the IT system for reasons such as the convenience of work. As a result, various breaches could occur due to the weakness of the IT system. This study seeks to discover the items and vulnerabilities that SMEs who have difficulties in information security due to technology limitations, human resources, and budget should first diagnose and check. First, to compare the existing domestic and foreign smart factory vulnerability classification systems and improve the current classification system, the latest smart factory vulnerability information is collected from NVD, CISA, and OWASP. Then, significant keywords are extracted from pre-processing, co-occurrence network analysis is performed, and the relationship between each keyword and vulnerability is discovered. Finally, the improvement points of the classification system are derived by mapping it to the existing classification system. Therefore, configuration and maintenance, communication and network, and software development were the items to be diagnosed and checked first, and vulnerabilities were denial of service (DoS), lack of integrity checking for communications, inadequate authentication, privileges, and access control in software in descending order of importance.

• Journal of the Daesoon Academy of Sciences
• /
• v.21
• /
• pp.1-28
• /
• 2013

The intention of this article is to check for the believers in Daesoonjinrihoe how to perceive the gods who they believe in. For that intention, I explained how the perception of gods in Daesoonjinrihoe is different from the perception of gods in other religions. To make a long story short, because of its polytheism the idea of god in Daesoonjinrihoe is different from monotheism such as Christianity, Islam. In addition, in spite of its polytheism it is different from other polytheism such as the religion in ancient India, especially rig-vedicreligion. In this article it is said that the believers in Daesoonjinrihoe have understood the distinction between Shin(神) and Shinmyung(神明). Nowadays Shin that has been used in Korea, China, Japan, is the word that was translated from English god. Therefore we need to reappraise the meaning of the word Shin. Anyway Shin that is being used in general means Shinmyung in Daesoonjinrihoe. Instead when they say the name of functional gods and the name to which the meaning of its origin affixed, the word Shin is used. Meanwhile, it has the advantage of classifying the ideas of god, but we can't explain all of them through the use of those classifications. I checked some classifications in this article and tried to apply the idea of gods in Daesoonjinrihoe. As a result, each classification has some critical points. There fore in this article I explained the distinguishing ideas of god in Daesoonjinrihoe from that in other religions, instead of the explaining fitted those classifications.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.3
• /
• pp.41-48
• /
• 2023

Background: This study examined the effects of the bridge exercise with trunk rotation on the thickness of body trunk muscles, including external oblique, internal oblique, and transverse abdominis in healthy male adults. Design: Randomized controlled trial Methods: Twenty-four men were evenly divided into a trunk rotation bridge exercise group and a basic bridge exercise group by drawing lots. The two groups performed the respective exercise for thirty minutes, three times a week for six weeks. repeated measure analysis of variance (ANOVA) was used after distinguishing between three different time points before the experiment, three weeks after the experiment, and six weeks after the experiment. The significance level was set at 0.05. In case an interaction between time and group existed, the paired t-test was used to examine the within-group difference. The independent-sample t-test was used to check the between-group difference. The significance level was set at 0.05. Results: All the men showed a significant change over time in their external oblique, internal oblique, and transverse abdominis muscles. An interaction between time and group was also found (p<0.05). Conclusion: The bridge exercise with trunk rotation causes a meaningful difference in the thickness of external oblique, internal oblique, and transverse abdominis muscles. Therefore, this study proposes the use of this exercise for lower-back stabilization in future research and clinical settings.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.133-145
• /
• 2023

Competition is intensifying as the golfwear market grows and expands rapidly due to the influx of MZ generation golfers, so it is necessary to plan knit golfwear products suitable to consumer needs The purpose of this study is to contribute to product planning by analyzing knit design factors according to the brand image of golfwear. First, the top five sales brands surveyed by Apparel News were selected. The selected brands were G-Fore, PXG, Malbon Golf, Titleist, and Mark & Lona. Knit products sold by the selected golfwear brands were investigated based on design factors, such as image, item, stich, yarn, color, and pattern to analyze knit design factors according to brand image. G-Fore's modern classical image was influenced by pullovers, vest items, 100% wool, color contrast, intasha stich, and monotone colors. PXG's sporty modern image was due to a mixture of rayon and polyester in jumper items, while Malbon Golf's American casual image applied character patterns and intasha knitwear. Line points, plain knitwear, and monotone colors were analyzed as design factors for Titleist's modern minimal image, while Mark & Lona's classic casual was analyzed as knit design factors, such as check patterns and jacquard knitwear. Differences in knit design factors according to brand image can be identified.

• Proceedings of the KSRS Conference
• /
• 2001.03a
• /
• pp.140-148
• /
• 2001

The satellite sensor model is typically established using ground control points acquired by ground survey Of existing topographic maps. In some cases where the targeted area can't be accessed and the topographic maps are not available, it is difficult to obtain ground control points so that geospatial information could not be obtained from satellite image. The paper presents several satellite sensor models and satellite image decomposition methods for non-accessible area where ground control points can hardly acquired in conventional ways. First, 10 different satellite sensor models, which were extended from collinearity condition equations, were developed and then the behavior of each sensor model was investigated. Secondly, satellite images were decomposed and also pseudo images were generated. The satellite sensor model extended from collinearity equations was represented by the six exterior orientation parameters in 1$^{st}$, 2$^{nd}$ and 3$^{rd}$ order function of satellite image row. Among them, the rotational angle parameters such as $\omega$(omega) and $\phi$(phi) correlated highly with positional parameters could be assigned to constant values. For non-accessible area, satellite images were decomposed, which means that two consecutive images were combined as one image. The combined image consists of one satellite image with ground control points and the other without ground control points. In addition, a pseudo image which is an imaginary image, was prepared from one satellite image with ground control points and the other without ground control points. In other words, the pseudo image is an arbitrary image bridging two consecutive images. For the experiments, SPOT satellite images exposed to the similar area in different pass were used. Conclusively, it was found that 10 different satellite sensor models and 5 different decomposed methods delivered different levels of accuracy. Among them, the satellite camera model with 1$^{st}$ order function of image row for positional orientation parameters and rotational angle parameter of kappa, and constant rotational angle parameter omega and phi provided the best 60m maximum error at check point with pseudo images arrangement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2016

With the development of fast construction mode in shipbuilding market, the demand on accuracy management of hull is becoming higher and higher in shipbuilding industry. In order to enhance production efficiency and reduce manufacturing cycle time in shipbuilding industry, it is important for shipyards to have the accuracy of ship components evaluated efficiently during the whole manufacturing cycle time. In accurate shipbuilding process, block accuracy is the key part, which has significant meaning in shortening the period of shipbuilding process, decreasing cost and improving the quality of ship. The key of block accuracy control is to create a integrate block accuracy controlling system, which makes great sense in implementing comprehensive accuracy controlling, increasing block accuracy, standardization of proceeding of accuracy controlling, realizing "zero-defect transferring" and advancing non-allowance shipbuilding. Generally, managers of accuracy control measure the vital points at section surface of block by using the heavy total station, which is inconvenient and time-consuming for measurement of vital points. In this paper, a new measurement method based on point clouds technique has been proposed. This method is to measure the 3D coordinates values of vital points at section surface of block by using 3D scanner, and then compare the measured point with design point based on ICP algorithm which has an allowable error check process that makes sure that whether or not the error between design point and measured point is within the margin of error.

• Journal of Korean Medical classics
• /
• v.11 no.2
• /
• pp.146-168
• /
• 1998

This thesis is a study on the diagnostic theory and methods of Macjin(checking of pulse) as described in the Whang Di Nei Qing. There are four methods of Macjin in this text, namely: Dong Macjin(動脈法), Sam Bu Gu Who Macjin(三部九脈診). In Young Gi Gu Macjin(人迎氣口脈診法), Nei Qing's Gi Gu Macjin(內徑의 氣口脈法). Each method developed in it's own way, but they are all closely related and became the basis of today's Macjin. I examined the methods of Macjin in the Whang Di Nei Qing from a perspective of "change". The main questions of this study are: "What brought about the development of the different methods?". "How do the methods differ?", and "how did these methods evoke into today's Macjin?". The method of Macjin generated spontaneously from the observation and treatment of disease. Dong Macjin was the first method developed and became the basis of subsequent forms of Macjin. The accumulation of medical knowledge and the influence of oriental philosophy fueled the evolution of Macjin. Chronologically, Macjin methods developed starting with Dong Macjin and eventually into Sam Bu Gu Who Macjin. In Young Gi Gu Macjin, and Nei Qing's Gi Gu Macjin. The different methods of Macjin vary in how many pulse points are checked, and were established with simplicity and effectiveness in mind. Dong Macjin involves the checking the whole body. Sam Bu Gu Who Macjin involves nine points. In Young Gi Gu Macjin involves four points. and Nei Qing's Gi Gu Macjin involves two. In it's early development, the checking of a patient's pulse was used to diagnose only localized disorders in comparison with symptoms. It evolved with Oh Jang Mad(五臟脈, five main types of pulse) to be able to check internal organs with the introduction of Nei Qing's Gi Gu Macjin. After the division of Chon Kwan Chuck(寸關尺), it evolved further to be able to make a detailed diagnosis by using the result of pules checks. Nowadays, we can make 28 forms of diagnostic indices from these development. In conclusion, Macjin can be used practically and effectively in the diagnosis of disease. In using three methods of Macjin(In Young Gi Gu Macjin, Nei Qing's Gi Gu Macjin, and today's Gi Gu Macjin, which can determine the whole body's Siate of well-being) in conjunction with Dong Macjin(which helps pinpoint the localized disorder), an exact diagnosis can be obtained. I strongly feel that we should acquire objectivity by accommodating Macjin with modern methods of medicine.

• Journal of The Korean Association For Science Education
• /
• v.19 no.2
• /
• pp.217-228
• /
• 1999

The purpose of this study was to investigate the effects of the constructivist instructional model on the acquisition of atmospheric pressure conceptions and learning motivation. The step of constructivist instruction was prediction and explanation-experiment and observation-discussion-application. The control group consisted of two classes of students who participated in the teacher-centered instruction. The experimental group consisted of two classes of students who participated in the constructivist instruction. To examine students' preconceptions before the instructions, a preconceptions test was administered. After the instructions, students' acquisition of atmospheric pressure conceptions and learning motivation were measured with a researcher-made post-conceptions test and The Course Interest Survey. The results from this study were as follows: First, the constructivist instruction is more effective method in acquisition of atmospheric pressure conceptions and learning motivation than the teacher-centered instruction. Therefore, in order to increase the acquisition of science conceptions and to decrease the science misconceptions, we need to use the constructivist instructional model which make learners self check their own preconceptions of science. Second, the constructivist instruction is more effective than teacher-centered instruction in three elements of learning motivation. So, we need to develop the effective ARCS(attention, relevance, confidence, satisfaction) strategies in order to use the constructivist instructional model and to verify it's effectiveness. Third, to improve teaching and learning methods, educational researchers should carry out studies using many points of view than studies biased constructivism or objectivism. In this respect, we need to contrive how to integrate constructive view points and objective view points.

• Journal of Food Hygiene and Safety
• /
• v.3 no.3
• /
• pp.117-129
• /
• 1988

Packaged meal manufacturing establishments in Seoul city and Kyungkido province were assessed in terms of the sanitary conditions and practices, time and temperature, and microbiological quality. Sanitary check-lists were developed to evaluate the sanitary condition of sampled packaged meal manufacturing establishments. Microbiological tests on.food containers, equipments, and foods in various phases of product flow were done. The results of the study are summarized as follows; 1) Sanitary condition of kitchen.and sanitary practices of employees in.large and medium establishments were evaluated as the some improvement required in order to meet all standards. But sanitary practices of employees in small establishments were evaluated as the unsatisfactory state with negligence or ignorance of safe practice. 2) The microbiological quality of basic ingredients and food materials after pre-preparation were poor. 3) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, assembly and packaging before delivery were critical. 4) Microbiological test results for food containers, equipments indicated that sanitary conditions of stainless steel ware, knife, wiping clothes and cutting board should be improved promptly. 5) Critical control points identified were ingredients, pre-preparation, Holding, and assembly and packaging. 6) Guidelines were suggested for effective quality control of packaged meals production.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.18-27
• /
• 2002

In order to improve the accuracy of the solution near the boundary in an analysis of viscous flow around an arbitrary boundary which move and be deformed using an Eulerian concept, a level-set based grid deformation method is introduced to concentrate grid points near the boundary. This paper presents a new monitor function which can easily control the level of the concentration of grid points along the boundary. Computations for steady flow around a semi-circular cylinder mounted on the bottom of the flow domain were carried out to check the improvement of the solution using the adaptive grid system with an immersed boundary method. The present numerical results show a good agreement with the solutions obtained by a body fitted grid system and more accurate solutions than those computed with non-adaptive grid system. For the validation of mechanical usefulness of the present method, an expanded analysis of flow around multi-body fixed in the flow domain was carried out. Finally, the present moving adaptive grid method was applied to a two-dimensional bubble rise problem. The computed results show well adapted grid points around the boundary of the bubble at every time and a good agreement with the result calculated by fixed grid system.