• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.721-726
• /
• 2010

'Nampung', a new soybean cultivar for soy-paste, was developed from the cross between Suwon190 and 'Pokwangkong' by soybean breeding team at the National Institute of Crop Science (NICS) in 2007. A promising line, SS97215-S-S-20, was selected and designated as the name of Milyang162. It was prominent and had good result from regional adaptation yield trials(RYT) for three years from 2005 to 2007 and was released as the name of 'Nampung'. It has a determinate growth habit, white flower, brown pubescence, yellow seed coat, light brown hilum, medium spherical seed (19.9 grams per 100 seeds). 'Nampung' is resistant to soybean mosaic virus and bacterial pustule, the major soybean disease in Korea. It is possible to harvest of 'Nampung' using combine because of it's lodging tolerance, few branches, and high position of pod attachment. The average yield of 'Nampung' is 2.97 ton per hectare in the regional yield trials (RYT) carried out for three years from 2005 to 2007 which is 21 percent higher than the check variety, 'Taekwang'.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.203-234
• /
• 2019

The concept of denied boarding is defined in Article 2(j) of Regulation 261/2004 thus: "denied boarding means a refusal to carry passengers on a flight, although they have presented themselves for boarding under the conditions laid down in Article 3(2), except where there are reasonable grounds to deny them boarding, such as reasons of health, safety or security, or inadequate travel documentation." So far as relevant to this case, to be entitled to compensation, if denied boarding, Article 3(2) provides a passenger must first come within the scope of the protection of the Regulation, which applies under the following conditions: "${\cdots}$.that passengers (a) have a confirmed reservation on the flight concerned and, except in the case of cancellation referred to in Article 5, present themselves for check-in, as stipulated and at the time indicated in advance and in writing (including by electronic means) by the air carrier, the tour operator or an authorised travel agent, or, if no time is indicated, not later than 45 minutes before the published departure time." This paper reviews the EU Cases such as Rodríguez Cachafeiro v. Iberia [2012] Case C-321/11; Finnair Oyj v. Timy Lassooy [2012] Case C-22/11; Caldwell v. easyJet Airline Co. Ltd. [2015] ScotSC 64. ECJ and Sheriff court of Scotland held that the concept of denied boarding, within the meaning of Articles 2(j) and 4 of Regulation No 261/2004 establishing common rules on compensation and assistance to passengers in the event of denied boarding and of cancellation or long delay of flights, and repealing Regulation No 295/91, must be interpreted as relating not only to cases where boarding is denied because of overbooking but also to those where boarding is denied on other grounds, such as operational reasons. Also, ECJ ruled that Articles 2(j) and 4(3) must be interpreted as meaning that the occurrence of extraordinary circumstances resulting in an air carrier rescheduling flights after those circumstances arose cannot give grounds for denying boarding on those later flights or for exempting that carrier from its obligation, under Article 4(3) of that regulation, to compensate a passenger to whom it denies boarding on such a flight.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.1-23
• /
• 2019

Big data refers to data that is difficult to store, manage, and analyze by existing software. As the lifestyle changes of consumers increase the size and types of needs that consumers desire, they are investing a lot of time and money to understand the needs of consumers. Companies in various industries utilize Big Data to improve their products and services to meet their needs, analyze unstructured data, and respond to real-time responses to products and services. The financial industry operates a decision support system that uses financial data to develop financial products and manage customer risks. The use of big data by financial institutions can effectively create added value of the value chain, and it is possible to develop a more advanced customer relationship management strategy. Financial institutions can utilize the purchase data and unstructured data generated by the credit card, and it becomes possible to confirm and satisfy the customer's desire. CRM has a granular process that can be measured in real time as it grows with information knowledge systems. With the development of information service and CRM, the platform has change and it has become possible to meet consumer needs in various environments. Recently, as the needs of consumers have diversified, more companies are providing systematic marketing services using data mining and advanced CRM (Customer Relationship Management) techniques. KB Kookmin Card, which started as a credit card business in 1980, introduced early stabilization of processes and computer systems, and actively participated in introducing new technologies and systems. In 2011, the bank and credit card companies separated, leading the 'Hye-dam Card' and 'One Card' markets, which were deviated from the existing concept. In 2017, the total use of domestic credit cards and check cards grew by 5.6% year-on-year to 886 trillion won. In 2018, we received a long-term rating of AA + as a result of our credit card evaluation. We confirmed that our credit rating was at the top of the list through effective marketing strategies and services. At present, Kookmin Card emphasizes strategies to meet the individual needs of customers and to maximize the lifetime value of consumers by utilizing payment data of customers. KB Kookmin Card combines internal and external big data and conducts marketing in real time or builds a system for monitoring. KB Kookmin Card has built a marketing system that detects realtime behavior using big data such as visiting the homepage and purchasing history by using the customer card information. It is designed to enable customers to capture action events in real time and execute marketing by utilizing the stores, locations, amounts, usage pattern, etc. of the card transactions. We have created more than 280 different scenarios based on the customer's life cycle and are conducting marketing plans to accommodate various customer groups in real time. We operate a smart offering system, which is a highly efficient marketing management system that detects customers' card usage, customer behavior, and location information in real time, and provides further refinement services by combining with various apps. This study aims to identify the traditional CRM to the current CRM strategy through the process of changing the CRM strategy. Finally, I will confirm the current CRM strategy through KB Kookmin card's big data utilization strategy and marketing activities and propose a marketing plan for KB Kookmin card's future CRM strategy. KB Kookmin Card should invest in securing ICT technology and human resources, which are becoming more sophisticated for the success and continuous growth of smart offering system. It is necessary to establish a strategy for securing profit from a long-term perspective and systematically proceed. Especially, in the current situation where privacy violation and personal information leakage issues are being addressed, efforts should be made to induce customers' recognition of marketing using customer information and to form corporate image emphasizing security.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.2
• /
• pp.279-299
• /
• 2019

Recently occurred earthquake Gyeongju and Pohang served as a momentum to remind that Korean peninsular is not a safety zone from earthquake anymore. The importance of seismic design, therefore, have been realized and researches regarding design response spectrum have been actively carried out by many researchers and engineers. Current tunnel seismic design method is conducted to check safety of tunnel structure by dynamic numerical analysis with condition of completed lining installation, so, it is impossible to consider safety of tunnel behavior under construction. In this study, therefore, dynamic numerical analysis considering seismic wave propagations has been performed after back analysis using results from field monitoring of tunnel under construction in fractured zone and 1st reinforcement (shotcrete, rockbolt) behaviour are analyzed. Waves are classified by period characteristic (short and long). As a result, the difference depending on period characteristic is minor, and increasements of displacement are obtained at crown displacement due to seismic wave is 28~31%, 14~16% at left side of tunnel in the fractured zone, 13~27% at right side of tunnel in the bed rock, respectively. In case of shotcrete axial force is increased 113~115% at tunnel crown, 102% at left side, 106~110% at right side, respectively. Displacement and axial force of rockbolts which are selected by type of anchored grounds (only fractured zone, fractured zone and bed rock, only bedrock) are analyzed, as a result, rockbolt which is anchored to fractured zone and bed rock at the same time are weaker than any other case.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.29 no.4
• /
• pp.150-157
• /
• 2018

The Zygote arrest 1 (ZAR1) gene is known to affect early embryonic development in various vertebrates. In this study, we performed the association analysis to check whether there is any significant relationship between semen kinematic characteristics and the ZAR1 gene. To determine semen kinematic characteristics, we measured motility (MOT), straight-line velocity (VSL), curvilinear velocity (VCL), average path velocity (VAP), linearity (LIN), straightness (STR), amplitude of lateral head displacement (ALH), and beat cross frequency (BCF) of spermatozoa in boars. In order to detect single nucleotide polymorphisms (SNPs), we extracted genomic DNA from multiple Duroc boars, and then subsequently used them in sequencing reactions. As a result, three SNPs were detected in the intronic region of ZAR1 gene (g.2435T>C in intron 2, g.2605G>A and g.4633A>C in intron 3 ). SNPs g.2435T>C and g.2605G>A were significantly associated with MOT (p<0.01) and VSL (p<0.05), and g.4633A

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.51-66
• /
• 2018

As AI (Artificial Intelligence) technologies have been swiftly evolved, a lot of products and services are under development in various fields for better users' experience. On this technology advance, negative effects of AI technologies also have been discussed actively while there exists positive expectation on them at the same time. For instance, many social issues such as trolley dilemma and system security issues are being debated, whereas autonomous vehicles based on artificial intelligence have had attention in terms of stability increase. Therefore, it needs to check and analyse major social issues on artificial intelligence for their development and societal acceptance. In this paper, multi-categorical sentiment analysis is conducted over online public opinion on artificial intelligence after identifying the trending topics related to artificial intelligence for two years from January 2016 to December 2017, which include the event, match between Lee Sedol and AlphaGo. Using the largest web portal in South Korea, online news, news headlines and news comments were crawled. Considering the importance of trending topics, online public opinion was analysed into seven multiple sentimental categories comprised of anger, dislike, fear, happiness, neutrality, sadness, and surprise by topics, not only two simple positive or negative sentiment. As a result, it was found that the top sentiment is "happiness" in most events and yet sentiments on each keyword are different. In addition, when the research period was divided into four periods, the first half of 2016, the second half of the year, the first half of 2017, and the second half of the year, it is confirmed that the sentiment of 'anger' decreases as goes by time. Based on the results of this analysis, it is possible to grasp various topics and trends currently discussed on artificial intelligence, and it can be used to prepare countermeasures. We hope that we can improve to measure public opinion more precisely in the future by integrating empathy level of news comments.

• Journal of The Korean Association For Science Education
• /
• v.39 no.3
• /
• pp.363-377
• /
• 2019

This study reveals the aspects of subjectivity in the test results in a science-specific aspect when assessing science-related affective characteristic through self-report items. The science-specific response was defined as the response that appear due to student's recognition of nature or characteristics of science when his or her concepts or perceptions about science were attempted to measure. We have searched for cases where science-specific responses especially interfere with the measurement objective or accurate self-reports. The results of the error due to the science-specific factors were derived from the quantitative data of 649 students in the 1st and 2nd grade of high school and the qualitative data of 44 students interviewed. The perspective of science and the characteristics of science that students internalize from everyday life and science learning experiences interact with the items that form the test tool. As a result, it was found that there were obstacles to accurate self-report in three aspects: characteristics of science, personal science experience, and science in tool. In terms of the characteristic of science in relation to the essential aspect of science, students respond to items regardless of the measuring constructs, because of their views and perceived characteristics of science based on subjective recognition. The personal science experience factor representing the learner side consists of student's science motivation, interaction with science experience, and perception of science and life. Finally, from the instrumental point of view, science in tool leads to terminological confusion due to the uncertainty of science concepts and results in a distance from accurate self-report eventually. Implications from the results of the study are as follows: review of inclusion of science-specific factors, precaution to clarify the concept of measurement, check of science specificity factors at the development stage, and efforts to cross the boundaries between everyday science and school science.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.112-129
• /
• 2011

This paper was written to understand, through the types and production techniques, how cooking vessels of Baekje Hanseong period had evolved, - the cooking vessels that were excavated from the historic sites of Baekje Hanseong Period such as Mongchontoseong and Pungnaptoseong of Seoul, the ancient tomb group of Seokchon-dong, and Misari historic site of Hanam. First, the results produced through the analysis of types of these cooking vessels are as followings: as for deep bowls, the maximum body diameter is found on the top of pottery, while as for an egg-shaped pottery, the maximum body diameter is found on the middle height of pottery. However, as for the rim diameter ratio to the neck diameter ratio of pottery, the said two typed potteries were shown to have smaller ones. In consideration of each historic site, as for deep bowls, the ancient tomb group of Seokchon-dong had potteries that had less volumes, were deeper, and had higher maximum body diameters. When it comes to an egg-shaped pottery, Pungnaptoseong had the potteries that were deeper than those of Misari historic site, and their potteries also had the maximum body diameter found on the middle height of pottery, and larger rim diameter ratio to the neck diameter of the pottery. The results produced though the analysis of the production techniques of these cooking vessels are as followings: in the case of deep bowls, as the width of a volume category gets larger, the pottery stamping with an anvil including patterns was more frequently used for pottery production. In this case, simultaneously braid patterns were frequently found on the outer sides of these potteries. In addition, it was found the basal walls of these potteries were thinnest in all typed potteries. This shows there occurred technique transitions according to the time flow. When it comes to an egg-shaped pottery as well, the pottery produced by using an anvil had the thinnest basal wall and its rim diameter ratio to its neck diameter ratio was smaller. Also around the mouth of this pottery, traces were found on its front, the traces formed by the strong rotating power. It is determined these two typed potteries were all produced by using an anvil to have thinner walls. Then, how these potteries were used? In the case of deep bowls, liquid food was put on a hearth or ground to be cooked whereas in the case of an egg-shaped pottery, the pottery was put on a puttumak(kitchen stove) mainly for boiling water. The deep bowls and egg-shaped potteries excavated from the center areas of Baekje Hanseong Period were not clearly determined about when their pastes or firing times were, but as for their production techniques, it was possible to check how they had developed. Moreover, it was determined that in the changing aspects of their production techniques, temporalite is also reflected.

• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.15-22
• /
• 2019

The purpose of this study is to develop a strain sensor based on a nanoweb by applying electrical conductivity to a polyurethane nanoweb through the use of Graphene. For this purpose, 1% Graphene ink was pour-coated on a polyurethane nanoweb and post-treated with PDMS (Polydimethylsiloxane) to complete a wearable strain sensor. The surface characteristics of the specimens were evaluated using a field emission scanning electron microscope (FE-SEM) to check whether the conductive material was well coated on the surface of the specimen. Electrical properties of the specimens were measured by using a multimeter to measure the linear resistance of the specimen and comparing how the line resistance changes when 5% and 10% of the specimens are tensioned, respectively. In order to evaluate the performance of the specimen, the gauge factor was obtained. The evaluation of the clothing was performed by attaching the completed strain sensor to the dummy and measuring the respiration signal according to the tension using MP150 (Biopac system Inc., USA) and Acqknowledge (ver. 4.2, Biopac system Inc., U.S.A.). As a result of the evaluation of the surface characteristics, it was confirmed that all the conductive nanoweb specimen were uniformly coated with the Graphen ink. As a result of measuring the resistance value according to the tensile strength, the specimen G, which was treated with just graphene had the lowest resistance value, the specimen G-H had the highest resistance value, and the change of the line resistance value of the specimen G and the specimen G-H is increased to 5% It is found that it increases steadily. Unlike the resistance value results, specimen G showed a higher gauge rate than specimen G-H. As a result of evaluation of the actual clothes, the strain sensor made using the specimen G-H measured the stable peak value and obtained a signal of good quality. Therefore, we confirmed that the polyurethane nanoweb treated with Graphene ink plays a role as a breathing sensor.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.56-69
• /
• 2016

Flame resistant treatment has been applied since 1973 for fire prevention in historical wooden buildings, but several problems, such as whitening and discoloration are constantly occurring in some Dancheong, in spite of evaluation criteria. It is supposed that these phenomena are caused by the stability issue of flame retardant, Dancheong production methods, the residue of chemicals, which were applied in the past, building location environments, etc., but no evaluation and cause inspection has been performed. Therefore, this study aims to verify the effect of flame retardant on Dancheong by producing Pseudo-samples and setting spatial and temporal environment conditions. Pseudo-samples of Dancheong were produced using three methods; the method specified in the Standard Specification of Properties; the method, which is generally used in the site and the traditional method. For different environment conditions of pseudo-samples, the areas were classified into a coastal area and an inland area and the places were classified into a sunny place and a wetland. After applying a flame retardant, annual variations were inspected for 12 months and change aspects were observed through scan and regular observation. In annual variation inspection, various variations like whitening, decolorization, dissolution and exfoliation were found and especially, whitening was most dominant. When the effect of flame retardant depending on the production methods was analyzed, whitening occurred in all the three production methods. It is supposed that this is because calcium(Ca) was contained in the coloring material of each production method and it reacted with phosphorous(P) of flame retardant. When the effect of flame retardant depending on the environment conditions was analyzed, whitening occurred more in the coastal area than in the inland area and it reduced in the building in a sunny place, which was constructed using the traditional method. It is supposed that this results from the humidity change and the difference of glue used in each production method. In conclusion, for using a flame retardant containing phosphorous(P), there is a need to check if calcium components including Oyster Shell White were used in Dancheong in advance and to conduct various preliminary studies on place conditions and Dancheong construction conditions.