• 한국미생물·생명공학회지
• /
• 제47권3호
• /
• pp.412-422
• /
• 2019

The present study reports the morphological and molecular characterization of the fungal strain, CMSS06 and evaluates its raw starch hydrolyzing ability in four different agricultural substrates (rice bran, banana peel, cassava tubers, and coconut water). The potential use of each agricultural substrate to replace the expensive fermentation media was evaluated with six different fermentation media: rice bran (RB), banana peel (BP), cassava starch (CS), cassava in coconut water (CSCW), cassava in modified coconut water (CMCW), and pure Coconut water (CW). The fungal strain CMSS06 was identified as Thielaviopsis ethacetica by the analysis of the ITS sequences. The T. ethacetica alpha amylase enzyme exhibited maximum alpha amylase activity at 72 h, pH 7.0, and $40^{\circ}C$ on soluble starch. This species resulted in the highest enzyme activity (mU/ml) of 26.06, 10.89, 58.82, 14.2, and 54.67 with the RB, BP, CS, CSCW, and CMCW fermentation media, respectively. The results indicate that CS can be used as a carbon substrate and CMCW can be used to accelerate the fermentation by T. ethacetica. The enzyme was partially purified by 40-60% ammonium sulphate fraction, and it showed total enzyme activity, total protein content, specific activity, purification fold, and a recovery of 2400 mU, 30 mg, 80 mU/mg, 2.7, and 71.1%, respectively. The molecular mass of the T. ethacetica alpha amylase was estimated on SDS-PAGE, and two bands around 50 kDa and 70 kDa were identified. The present study implies that T. ethacetica can produce alpha amylase, and it can be used to hydrolyze raw starch during the fermentation processes.

• 한국초지조사료학회지
• /
• 제43권3호
• /
• pp.168-176
• /
• 2023

Silicon (Si) has the potential to improve plant growth and stress tolerance. The study aimed to explore Si-involving plant responses and molecular characterization of different Si-responsive genes in alfalfa. In this study, the exogenous supplementation of Si enhanced plant growth, and biomass yield. Si-acquisition in alfalfa root and shoot was higher in Si-supplemented compared to silicon deficient (-Si) plants, implying Si-acquisition has beneficial on alfalfa plants. As a consequence, the quantum efficiency of photosystem II (Fv/Fm) was significantly increased in silicon-sufficient (+Si) plants. The quantitative gene expression analysis exhibited a significant upregulation of the Lsi1, Lsi2, Lsi3, NIP5;1, and NIP6;1 genes in alfalfa roots, while BOR1, BOR4, NIP2, and NIP3 showed no significant variation in their expression. The MEME results further noticed the association of four motifs related to the major intrinsic protein (MIP). The interaction analysis revealed that NIP5;1 and Lsi1 showed a shared gene network with NIP2, BOR1, and BOR4, and Lsi2, Lsi3 and NIP3-1, respectively. These results suggest that members of the major intrinsic proteins (MIPs) family especially Lsi1, Lsi2, Lsi3, NIP5;1, and NIP6;1 genes helped to pass water and other neutral solutes through the cell membrane and those played significant roles in Si uptake and transport in plants. Together, these insights might be useful for alfalfa breeding and genome editing approaches for alfalfa improvement.

• Journal of Periodontal and Implant Science
• /
• 제32권2호
• /
• pp.351-360
• /
• 2002

In the study presented here, identification, purification, and partial characterization of a hemin-regulated protein in Prevotella nigrescens were carried out. The results of this study confirm that the availability of hemin influences the expression of a selected membrane protein as well as the growth rate of P. nigrescens ATCC 33563. The 50 kDa cell envelope associated protein, whose expression is hemin regulated, is considered to be a putative hemin-binding protein from P. nigrescens. Disulfide bonds were not present in this protein, and N'-terminal amino acid sequence analysis revealed that this protein belongs to a new, so far undescribed protein. The 50 kDa protein was found to be rich in hydrophilic amino acids, with glycine comprising approximately 60% of the total amino acids. The study described here is the first to identify, purify, and biochemically characterize a putative hemin-binding protein from P. nigrescens. Work is in progress to further characterize the molecular structure of this protein.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1997년도 춘계학술대회
• /
• pp.93-93
• /
• 1997

Analysis of protein is often frustrated by the inability to isolate large amounts of purified protein from a native source. To overcome this problem, fusion protein expression systems such as pGEX system have been widely used. Using pGEX system, the desired protein could be easily obtained in a large amount in E. coli, and then the fusion protein could be used for the study of the function of the given protein. To analyze and purify the GST fusion protein, anti-GST antibody could be used as one of the system of choice. However, the production and characterization of monoclonal anti-GST antibody has not been studied extensively yet. To produce monoclonal anti-GST antibody, GST was purified from E. coli transformed with pGEX-cs, one of the pGEX system and was used as an antigen. The monoclonal antibody was produced by fusion of the immunized spleen cells with SP2-0 myeloma cells. The antibody was characterized by ELISA, western blotting, etc. The monoclonal antibody produced in this study (mAb-GSTA) showed strong and specific immunoreactivity against not only GST but also GST-fusion proteins. Also, mAb-GSTA was successfully used for the immunoaffinity purification of the GST ${\beta}$-Rc.-third intracellular-loop fusion protein. The results of the present study suggest that mAb-GSTA may be used for the identification and purification of GST fusion proteins.

• Journal of the Korean Wood Science and Technology
• /
• 제23권1호
• /
• pp.13-20
• /
• 1995

This study was carried out to investigate the characterization of lignins from waste liquors in SP, KP, ASAM, and AS from Pinus densiflora, Quercus mongolica, and Betula ermanii. Spectroscopic study was applied to examine the lignins separated from different pulping process. Lignin contents in waste liqours increased in order of AS, ASAM, KP, and SP. UV spectra of three types of lignin except AS lignin showed similar pattern. IR spectra of AS lignin showed strong C=O absorptions in the range from 1730 to 1750$cm^{-1}$, where as those of KP, SP, and ASAM showed weak stretch in this region. NMR spectra of AS lignin showed strong characteristic chemical shifts of acetoxyl groups of acetylated aliphatic and aromatic hydroxyl groups at 2.0~2.5 ppm. Molecular weight of ASAM lignin from Pinus densiflora determined and found number average molecular weight 1,199, weight average molecular weight 5,458. z average molecular weight 17,242, and viscosity average molecular weight 5,457. It is considered from the results based on spectroscopic study of lignin that waste liquors (in SP, KP, ASAM and AS) from Pinus densiflora, Quercus mongolica, and Betula ermanii can be used for lignin utilization.

• 한국방재안전학회논문집
• /
• 제10권1호
• /
• pp.55-60
• /
• 2017

슬러지를 매립하는 경우 빗물의 유입이나 주변 지하수의 수분을 흡수하여 지반이 전체적으로 연약해 지는 경우가 발생한다. 본 연구에서는 탈수한 염색슬러지를 매립한 경우의 문제점을 확인하기 위해 염색슬러지와 염색슬러지-토사 혼합샘플에 대한 시험을 수행하였다. 염색슬러지가 배수가 원활하지 못한 매립지 내부에서 함수비가 높은 상태로 장기간 방치되면, 염색공장의 염색슬러지와 비교하여 투수성이 약 3/100 수준으로 낮아지고 압축성이 1.4배 증가하는 것으로 나타났다. 매립지의 안정성 확보를 위해 매립지 내부 함수비를 저하시키는 것이 중요하며, 배수로의 확보와 침출수 배제시설을 통한 관리가 필요할 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.361-369
• /
• 2010

A study on the corrosion inhibition of metals is important in many industrial applications (carbon steel, copper, aluminum, SUS 304, nickel). In this study, we investigated the C-V diagrams related to the surface corrosion of metals. It was observed through the SEM that the surface corrosion state of the various metals had the corrosion potential by the scan rate and the organic inhibitor containing an amine group. We determined to measure cyclic voltammetry using the three-electrode system. The measurement of oxidation and reduction ranged from -1350mV to 1650mV. The scan rate was 50, 100, 150, and 200mV/s. It turned out that the C-V characterization of SUS 304 was irreversible process caused by the oxidation current from the cyclic voltammogram. After adding organic inhibitors, the adsorption film was constituted, and the passive phenomena happened. As a result, it was revealed that the inhibition effect of metal corrosion depends on the molecular interaction, and the interaction has influence on the adsorption complex.

• Journal of Microbiology
• /
• 제45권6호
• /
• pp.547-552
• /
• 2007

Previously, we generated monoclonal antibodies (MAbs) that bound to the surface of human embryonic stem cells (hESCs) in an attempt to discover new hESC-specific surface markers. In this study, MAb 47-235 (IgG1, ${\kappa}$) was selected for further characterization. The MAb bound to the surface of undifferentiated hESCs but did not bind to mouse ESCs or mouse embryonic fibroblast cells in flow cytometric analysis. The antibody immunoprecipitated a 47 kDa protein from the lysates of cell surface-biotinylated hESCs. Identification of the protein by quadrupole time of flight tandem mass spectrometry revealed that 47-235 binds to Ag 243-5 protein of Mycoplasma arginini. BM-Cyclin treatment of the hESCs that reacted with 47-235 resulted in loss of mycoplasma DNA and the reactivity to 47-235. Nevertheless, the hESCs that were reactive to 47-235 maintained self-renewal and pluripotency and thus could be differentiated into three embryonic germ layers.

• 소성∙가공
• /
• 제22권5호
• /
• pp.275-279
• /
• 2013

The tube hydroforming process has received much attention in the automotive industry because of its advantages compared to conventional manufacturing technologies. A wide range of products such as sub-frames, camshafts, radiator frames, axles and crankshafts are made by hydroforming process. The hydroformed parts often need to be structurally joined to other components during assembly. Therefore, these automotive parts need to be manufactured with a localized attachment flange. In this study, FE forming analyses of a part with a rectangular flanged shape was performed with Dynaform 5.5. Using the optimized conditions determined numerically, hydroforming experiments were performed. Then, the characterization of defects was analyzed. Finally, the accuracy of the optimized internal pressure condition as well as that of the initial ram position were evaluated. The results demonstrated that flanged parts can be successfully produced using the tube hydroforming process.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권12호
• /
• pp.1696-1700
• /
• 2005

Five China native cattle breeds have been characterized by using 10 microsatellite DNA markers. The studied populations can be divided into five groups: Luxi cattle, Nanyang cattle, Jinnan cattle, Qinchuan cattle and Yanbian cattle. Allele frequencies were calculated and used for the characterization of the breeds and the study of their genetic relationships. Heterozygosity, polymorphism information content, the effective number of alleles was calculated. Nei' standard genetic distance (1978) was calculated and used for a neighbor-joining tree construction. NJ tree showed that Luxi cattle, Nanyang cattle, Jinnan cattle and Qinchuan cattle are closely related, whereas Yanbian cattle are clearly distinct from other four populations. The genetic relationship of five breeds corresponds to their history and geographic origins. This work analyzes the recent origin of these populations and contributes to the knowledge and genetic characterization of China native breeds.