• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.65-73
• /
• 2008

The characterization process for the accurate color reproduction in mobile phone with camera and LCD is popular. The camera and LCD characterization, gamut mapping process is necessary to map the camera's input color stimulus, CIEXYZ value, into the LCD's output color stimulus. Each characterization is the process estimating the relation between input and output signals. In case of LCD, because of output device, the output color stimulus for the arbitrary input signal can be measured by spectro-radiometer However, in the camera, as the input device, the characterization is an inaccurate and needs the manual works in the process obtaining the output signal because the input signal can not be generated. Moreover, after gamut mapping process, the noise is increased because the optimized gamma tone curve of camera for the noise is distorted by the characterization. Thus, this paper proposed the system of obtaining the output signal of camera and the method of gamma correction for the noise. The camera's output signal is obtained by RGB values of patches from captured the color chart image. However, besides the illumination, the error for the location of the chart in the viewfinder is generated when many camera modules are captured the chart. The method of correcting the position to correct the error from manual works. The position of camera is estimated by captured image. This process and moving of camera is accomplished repeatedly, and the optimized position can be obtained. Moreover, the lightness curve of camera output is corrected partly to reduce the noise from the characterization process.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.4
• /
• pp.517-536
• /
• 2020

The radionuclide inventory in radioactive waste from nuclear power plants should be determined to secure the safety of final repositories. As an alternative to time-consuming, labor-intensive, and destructive radiochemical analysis, the indirect scaling factor (SF) method has been used to determine the concentrations of difficult-to-measure radionuclides. Despite its long history, the original SF methodology remains almost unchanged and now needs to be improved for advanced SF implementation. Intense public attention and interest have been strongly directed to the reliability of the procedures and data regarding repository safety since the first operation of the low- and intermediate-level radioactive waste disposal facility in Gyeongju, Korea. In this review, statistical methodologies for SF implementation are described and evaluated to achieve reasonable and advanced decision-making. The first part of this review begins with an overview of the current status of the scaling factor method and global experiences, including some specific statistical issues associated with SF implementation. In addition, this review aims to extend the applicability of SF to the characterization of large quantities of waste from the decommissioning of nuclear facilities.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.455-470
• /
• 2001

This paper is focused on the traffic characterization for the efficient transmission of the VBR video source in the ATM network. For the traffic characterization, low traffic monitoring technique is applied and the dynamic VBR characterization method is suggested to satisfy the delay requirement. The dynamic VBR method uses the token bucket algorithm buffering though Cumulative Constraint Function. According to the Cumulative Constraint Function, the packet initially started transferring at the peak rate and the token bucket provided proper amount of buffer for traffic after a certain period of monitoring. It also reduced the network resource bandwidth through renewal of the cumulative frame and changed the rate from the previous frame information. It requires only small amount of monitoring and causes little overhead. In addition, it lowered the complexity of Deterministic Constraint Function to 0(n) and mapped the token rate and token depth to the token bucket. This study shows less network resource consumed than the previous method, comparing and analyzing the result of simulations.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.2
• /
• pp.59-63
• /
• 2006

The study is coated tin(IV) oxide coated on the titanium substrate electrodes by electrodepositon and dip-coating method and studied about that physical and electrochemical characterization by coating methods. After titanium substrate is etched in HCl, electrodespotion is coated $SnCl_2{\cdot}2H_2O$ in nitrate solution by pulse technique, dip-coating method is also used $SnCl_2{\cdot}2H_2O$ in 1;1V% HCl and coated by dipping and annealing process. tin(IV) oxide coated on titanium substrate electrodes by two coating methods are studied x-ray diffraction (XRD), scanning electron microscopy (SEM) to compare physical characterization of electrode and potential window by cyclic voltammetry (CV) to observe electrochemical characterization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2255-2263
• /
• 1994

Protocol conformance testing consists of procedures to observe an output and to check a transition state of the Implementation Under Test considered as a black box by applying an input. There are several methods to check the transition state such as Unique Input/Output(UIO) sequence. Distinguishing Sequence(DS) and Characterization Set(CS). Particularly, as a test method for a state having no UIO sequence, Partial UIO sequence method can be considered. In this paper, three properties which can be found among Partial UIO sequence and a modified algorithm using these properties are suggested.

• ETRI Journal
• /
• v.27 no.1
• /
• pp.22-42
• /
• 2005

Traditional traffic identification methods based on wellknown port numbers are not appropriate for the identification of new types of Internet applications. This paper proposes a new method to identify current Internet traffic, which is a preliminary but essential step toward traffic characterization. We categorized most current network-based applications into several classes according to their traffic patterns. Then, using this categorization, we developed a flow grouping method that determines the application name of traffic flows. We have incorporated our method into NG-MON, a traffic analysis system, to analyze Internet traffic between our enterprise network and the Internet, and characterized all the traffic according to their application types.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.2
• /
• pp.45-53
• /
• 2013

Many cases of strategically designed groundwater remediation have lack of information of hydraulic conductivity or permeability, which can render remediation methods inefficient. Many studies have been carried out to minimize this shortcoming by determining detailed hydraulic information either through direct or indirect measurements. One popular method for hydraulic characterization is the pilot point method (PPM), where the hydraulic property is estimated at a small number of strategically selected points using secondary measurements such as hydraulic head or tracer concentration. This paper adopted a D-optimality based pilot point method (DBM) developed previously for hydraulic head measurements and extended it to include both hydraulic head and tracer measurements. Based on different combinations of trials, our analysis showed that DBM performs well when hydraulic head is used for pilot point selection and both hydraulic head and tracer measurements are used for determining the conductivity values.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.137-137
• /
• 2010

This research proposed an advanced Electronic bead (EB) using MMA (Methy methacrylate) and CCA (Charge Control Agent). In the first, this paper presents about measurement method and characterization analysis of EB with wet coating method. Furthermore, this work presents the positive and negative EB fabrication procedure. As the experimental results, the proposed EB with charge to ratio[Q/M] is very attractive to Electronic paper driving characterization.

• Journal of Sensor Science and Technology
• /
• v.18 no.6
• /
• pp.417-422
• /
• 2009

The problems associated with the synthesis, characterization and application of $SnO_2$-Au nanocomposites for the optimization of conductometric gas sensors have been discussed in this report. Nanocomposites have been synthesized on the surface of $SnO_2$ films using successive ionic layer deposition(SILD) method. It has been shown that the proposed approach to surface modification of metal oxide films is an excellent method for the optimization of the operating characteristics of $SnO_2$-based gas sensors, being developed for the detection of reducing gases as well as ozone.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.5
• /
• pp.197-201
• /
• 2010

$ZnWO_4$ nanocrystallines were prepared from polymeric complex method using microwave irradiation. The average nanocrystalline sizes were 18~25 nm showing an ordinary tendency to increase with the temperatures from 400 to $600^{\circ}C$. Bulk type single crystals of $ZnWO_4$ were grown successfully in the [100], [010] and [001] directions using the Czochralski method. The effect of the growth parameters, such as the rotation speed, pulling rate and diameter of the grown crystals, were examined. The hardness, thermal expansion coefficients and dielectric constants of the crystals were evaluated.