• Transactions of Materials Processing
• /
• v.22 no.2
• /
• pp.101-107
• /
• 2013

The heat transfer characteristics between die and sheet and die and coolant are important parameters in hot press forming process. The determination of the quenching time that guarantees full martensitic transformation requires proper understanding of these heat transfer characteristics. The contact area changes drastically during the quenching process due to volume changes of both die and sheet by temperature drop as well as phase transformation. Several types of modeling techniques are tested in order to select the most suitable. The effect of quenching time as well as die heat conductivity on martensitic transformation is investigated and predictions are compared to experimental results.

• 연구논문집
• /
• s.29
• /
• pp.101-109
• /
• 1999

Presented in this paper is a new method of identifying the critical speed of rotor-bearing systems without actually reaching at the critical speed itself. Using the method, it is not only possible to calculate the critical speed by measuring a series of rotor responses at much lower rotating speeds away from and without reaching at the critical speeds but also the damping ratio and eccentricity of the system can be identified at the same time. Two types of test rotors were tested on the Rotor Dynamics Test Facility at the Rotordyn-amics Lab, KIMM, and the theory has been confirmed experimentally. The method can be adopted to monitor changes of the dynamic characteristics of critical rotating machinery before and after overhauls, repairs, exchanges of various parts, or to detect trends of direction of subtle changes in the dynamic characteristic parameters over a long periods of time.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.81-88
• /
• 2003

Earth friendly system is applied widely to industries for maintaining development. The declaration of earth friendly characteristic which is an indication of the total amount of energy in evaluation of earth friendly material is not easy to apply to building materials Therefore, Accurate standards about earth friendly materials are necessary. Earth friendly building materials should be considered in the fields of energy and resource consumption, changes in urban climate and resident health, etc. Among these fields, energy and resource consumption has released toxic pollutants into the air, caused indoor moisture problems and exhausted resources continuously. Especially, moisture problem is an indicator of main factors of earth friendly characteristic. Timber, Soil. Cement Mortar and Charcoal are used to examine the sustainable properties of materials of moisture control. The result shows that wood, charcoal and soil is vivid in changes of moisture absorption and discharge in comparison with that of cement mortar.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.8
• /
• pp.463-468
• /
• 2004

This paper was applied space harmonic method as a characteristic analysis technique for slotless PMLSM. There is advantages of active response to the change of design parameters as well as reduction of the calculation time. The method can be overcome disadvantages of finite element analysis that needs long times calculation, repetitions of pre and post-process. In this paper, 3D-space harmonic method was applied to consider the precise description of end turn coil shape and the changes of characteristic according to changes of length of z-axis direction. The thrust of optimal design was performed using genetic algorithm to enhance the thrust which is the disadvantage of slotless type PMLSM. For design parameters, width of permanent magnet, width of coil, width of coil inner and lengths of z-axis direction were selected. For objective functions. thrust per weight. thrust per volume. multi-objective function was selected.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.605-611
• /
• 2000

Presented in this paper is a new method of identifying the critical speed of rotor-bearing systems without actually reaching at the critical speed itself. Using the method, it is not only possible to calculate the critical speed by measuring a series of rotor responses at much lower rotating speeds away from and without reaching at the critical speeds but also the damping ratio and eccentricity of the system can be identified at the same time. Two types of test rotors were tested on the Rotor Dynamics Test Facility at the Rotordynamics Lab., KIMM, and the theory has been confirmed experimentally. The method can be adopted to monitor changes of the dynamic characteristics of critical rotating machinery before and after overhauls, repairs, exchanges of various parts, or to detect trends of direction of subtle changes in the dynamic characteristic parameters over a long periods of time.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.04b
• /
• pp.38.4-38.4
• /
• 2004

• Korean Journal of Veterinary Service
• /
• v.23 no.4
• /
• pp.309-312
• /
• 2000

Pathological findings of natural cases of rabbit hemorrhagic disease was investigated. Clinically inappentence, increase in body temperature, depression, bloody foam from nostrils, and sudden death were recognized. Characteristic anatomical findings were hemorrhages in the lungs, liver, kidneys, and heart. Intestinal catarrh and retention of turbid urine in urinary bladder were also often observed. Severe .necrosis of hepatic cells, massive hemorrhages in many organs and membranous glomerulonephritis with hyaline droplet formation were characteristic changes under the microscopy. Perivascular cuffing of brain and catarrhal enteritis were also seen in many cases.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.31
• /
• pp.73-80
• /
• 1994

Sequentiality in decision making is an inherent characteristic of the R&D Process, Conceptual changes are noted during the Course of the Project which represent a continuous improvement in the quality of the data available during the various project stages. In this paper, Eight characteristic types of project evaluation models have been developed economic index models, portfolio models, decision theory models, risk analysis models, frontier models, scoring models, profile models and checklists. Each of these will be critically reviewed and appraised.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.1-4
• /
• 1991

Relationship between againg and characteristic change of asphalt is not well known through asphalt rheolopy. Therefore, this study was conducted to evaluate characteristic change of asphalt cement due to againg based on experimental results of chromatogram and selected physical properties. Currently, three virgin asphalt cements were tested for physical properties and chromatograms before and after artificially conditioning for againg. Results in the current study showed that againg caused significant changes of physical properties and increase of larger size molecules and approximately corresponding reduction of smaller size molecule in asphalt cement molecular size distribution.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1289-1291
• /
• 2003

Climatic characteristic and changes of snow cover over the Northern Hemisphere, Eurasian, North America and the Tibet Plateau are studied based on data of the Northern Hemisphere snow cover area observed by Satellite remote sensing from 1966 to 2003. Meanwhile, the seasons' distribution charts of the Asian snow cover are made, they provide the climatic background of snow cover. In addition, the influences of snow cover on the climate, especially on the monsoon are analysed briefly, and some significance results are concluded.