• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.556-562
• /
• 2007

In this paper we propose a new method which adjusts the collision resolution depending on busy status of the channel to improve performance of IEEE 802.11 DCF. This scheme reduces the number of collisions in wireless channel by decreasing the amount of movements of each station's backoff stage based on busy event count and the one stage backoff model. Through simulation, we compared the performance of our scheme with that of DCF, ADCF and SD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1177-1184
• /
• 2008

Non-line-of-sight (NLOS) propagation can severely weaken the accuracy of ranging and localization in wireless location systems. NLOS bias mitigation techniques have recently been proposed to relieve the NLOS effects, but positively rely on the capability to accurately distinguish between LOS and NLOS propagation scenarios. This paper proposes an energy-capture-based NLOS identification method for LDR-UWB systems, based on the analysis of the characteristics of the channel impulse response (CIR). With this proposed energy capture method, the probability of successfully identifying NLOS is much improved than the existing methods, such as the kurtosis method, the strongest path compare method, etc. This NLOS identification method can be employed in adaptive modulation scheme to decrease bit error ratio (BER) level for certain signal-to-noise ratio (SNR). The BER performance with the adaptive modulation can be significantly enhanced by selecting proper modulation method with the knowledge of channel information from the proposed NLOS identification method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.86-88
• /
• 2019

In a complex geographical environment, communication quality of communication equipment is being seriously challenged. Secondary Users(SUs) must make the best possible use the idle spectrums that Primary Users(PUs) do not use and change spectrum frequently. Using the relevance vector machine(RVM) to establish a signal noise Ratio(SNR) Model for interference information and bit error rate(BER). Through the model and real-time interference information, the minimum channel SNR meeting the BER requirements of communication equipment can be predicted, and we can also calculate the minimum transmitted power. According to the simulation results, this method has better performance for selecting available channel and restraining interference.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.69-74
• /
• 2003

In this paper, we propose the synchronization recovery algorithm which is suitable to wireless Multimedia of wireless channel situation which is being used OFDM signaling method. The basic of the suggested clock synchronization. restoration Algorithm is to getting the shock response of channel or getting the multipath strength profile through IFTT after the getting the frequency, response of deducted channel from channel deducted of receiver and to trace the location in the channel energy concentrated area of timing area. And it also analysis the start point of 64-QAM and 16-QAM if the sampling clock offset has the sample of ${\pm}$ 1-3, and we identified the occurance of performance deterioration when occures more than 2 samples of offset to compare with star point and BER performance in optimum sampling point result of BER performance checking, and we know that the recovery algorithm proposed algorithm also provide excellent synchronization characteries under frequency, selecting fading channel as result of simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.39-45
• /
• 2011

In this paper, we propose an efficient multichannel MAC protocol with idle nodes assistance to avoid the multi-channel hidden terminal problem in cognitive radio ad hoc network and further to improve the performance of the network. The proposed MAC protocol can be applied to the cognitive radio adhoc network where every node is equipped with the single transceiver and one common control channel exists for control message negotiation. In the proposed protocol, the idle nodes available in the neighbour of communication nodes are utilized because the idle nodes have the information about the channels being utilized in their transmission range. Whenever the nodes are negotiating for the channel, idle nodes can help the transmitting and receiving nodes to select the free data channel for data transfer. With the proposed scheme, we can minimize the hidden terminal problem and decrease the collision between the secondary users when selecting the channel for data transfer. As a result, the performance of the network is increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.113-119
• /
• 2009

The training sequence with the appropriate length for equalization and initial synchronization is necessary before sending the pure data in the burst transmission type DS-UWB system. The length of the training sequence is one of the factors which make throughput decreased. The noble structure with the variable length of the training sequence whose length can be adaptively tailored according to the channel conditions (CM1,CM2,CM3,CM4) in the DS-USB systems is proposed. This structure can increase the throughput without sacrificing the performance than the method with fixed length of training sequence considering the worst case channel conditions. Simulation results under IEEE 802.15.3a channel model show that the proposed scheme can achieve higher throughput than a conventional one with the slight loss of BER performance. And this structure can reduce the computation complexity and power consumption with selecting the short length of the training sequence.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.61-69
• /
• 2017

The study on interference channel is very important information theoretically and many studies have been done on it. However, even in the simplest case, even in the case of two user interfering channels, the channel capacity is not yet known except in special cases. Recently, research on the multiplexing gain that shows the tendency of the transmission rate in the high signal to noise ratio (SNR) band has been actively carried out, instead of accurately grasping the channel capacity. Obtaining optimal multiplexing gain can reveal trends in channel capacity at high signal-to-noise ratio bands. In an interfering channel with two users, the best multiplexing gain can be obtained by eliminating the interference. However, recent research shows that when the number of users is more than three, the optimal multiplexing gain can not be obtained only by zero forcing and a new technique called interference sorting is needed. There are two types of interference sorting techniques. Beamforming A method of effectively separating signals and interference by properly selecting matrices and constructing structured codes using rational numbers and irrational numbers. The interference alignment technique can achieve optimal multiplexing gain in various environments such as interference channel, X channel, compound broadcast channel, and multi hop network for multi source multi destination. In recent years, it has also been applied to distributed storage. Lee et al., "Lattice Code Interference Alignment in Cooperative Multipoint Transmission (COMP) for Interference Channels of Three Users", Journal of the Institute of Electronics Engineers, vol.49-TC,no.6,2012. In this paper, the DoF of delayed channel information is obtained.

• Journal of Distribution Science
• /
• v.15 no.3
• /
• pp.61-72
• /
• 2017

Purpose - The ICT development is affecting the consumer behaviors in selecting channel or distribution system. This study aims to advance the theory on the influence and interaction with omni-channel behaviors. Specifically, analyzing moderating variable is category knowledge that effect between propensity of brand loyalty and its precedence factor which is perceived difference, perceived value, authenticity and consumer-brand relationship. Research design, data, and methodology - The subject of this research is consumers who purchase goods in omni-channel situation. The hypothesis of this research is derived from the literature of the preceding research analysis on brand loyalty, omni-channel and consumer behaviors. This study have constructs that were defined operationally with reference to previous studies, and the research model was designed to figure out the structural relationship among perceived difference, perceived value, authenticity, consumer-brand relationship and brand loyalty. From 2016 Sept. 1 to Dec. 31, a questionnaire survey was performed targeting customers using omni-channel. 327 questionnaire survey had conducted. 316 survey data were used for empirical analysis except data that had missing and wrong value. AMOS(structural equation) was used to confirm the hypothesis which developed by researcher. Results - The results of this study are as follows. First, an authenticity has significant effect on brand loyalty. Second, in the omni-channel situation, but perceived differentiation, perceived value, consumer-brand relationship does not affect brand loyalty. According to this result, it is judged that it is easy to search for information in the situation of omni-channel and integrated decision making is done without distinction between channels. Third, category knowledge has moderating effect between brand loyalty and precedence factors. When the category knowledge level is low, preceding factors have a significant effect on brand loyalty. when the category knowledge level is high, the preceding factors did not have a significant effect on brand loyalty except the authenticity. Conclusions - This study finds out omni-channel's phenomenon is different from other distribution channel phenomenon. In the situation of omni-channel, it is suggested that brand loyalty may be relatively low for a certain brand because it raises the knowledge level of the category. Then this study provides a managerial implications based on the role of the moderate effect on category knowledge, brand loyalty and omni-channel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1756-1763
• /
• 2014

A water pipeline buried under the riverbed could be exposed by bed erosion, therefore safe crossing sections should be analyzed for preventing damages due to the exposure of pipelines. In this study, flow and bed changes have been simulated using a two-dimensional numerical model for selecting the optimized section of pipeline crossing in the Geum River. As a result of simulation with the 20-year recurrence flood, sediment deposition has been distributed overall in the channel and bed erosion over 2 m has occurred near bridge piers. For the extreme flood simulation, the channel bed near the bridge piers has been eroded down to the buried depth. Therefore, within 140 m upstream of the bridge piers, bed erosion affects a buried pipeline in safety due to bridge pier effects and the crossing section over 150 m upstream of bridge piers is selected as a safe zone of a water pipeline.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.425-464
• /
• 2017

The Knowledge of the Channel (e) is often used as educational materials; it delivers very short but compelling message of strong or interesting timeliness. However, as the media environment changes, expectations and demands for The Knowledge The Knowledge of the Channel (e) is used in school education and what should be improved upon to increase utilization of educational resources. We surveyed 361 elementary, middle and high school teachers and analyzed the frequency of using, approach and learning activities of The Knowledge of the Channel (e) in school education. We also analyzed difficulties in using it in the school and what improvements should be made. Result show that the frequency of using The Knowledge of the Channel (e) in school is highest in elementary schools, followed by middle school, and then high school. Teachers strongly consider curricular relevance when selecting broadcasting contents for education, and among programs of EBS(Educational Broadcasting System), most frequently use The Knowledge of the Channel (e). The The Knowledge of the Channel (e) is mainly used as an incentive for increasing motivation. When examined by elementary school curriculum, this material is highly utilized in subjects with content such as society, morality, and science, or with approaches that require various perspectives. However, it is difficult for teachers to find materials directly related to their classes, and since other media content similar to The Knowledge of the Channel (e) is abundant, the utilization of The Knowledge of the Channel (e) is decreasing. To improve this, The Knowledge of the Channel (e) needs to improve its platform and transformed the type of The Knowledge of the Channel (e) content being provided on social media.