• 제목/요약/키워드: channel scanning

검색결과 135건 처리시간 0.028초

다중채널 Lidar를 이용한 수직갱도 조사용 3차원 형상화 장비 구현 (Fabrication of Three-Dimensional Scanning System for Inspection of Mineshaft Using Multichannel Lidar)

  • 김수로;최종성;윤호근;김상욱
    • 터널과지하공간
    • /
    • 제32권6호
    • /
    • pp.451-463
    • /
    • 2022
  • 수직갱도에서 붕괴사고가 일어났을 때, 붕괴현장의 위험도를 신속하게 평가하는 것은 매우 중요하다. 사고현장에서 추가적인 붕괴 위험 때문에 인력을 투입한 직접적인 조사는 불가능하다. 수백 미터 심도를 갖는 수직갱도에서는 무선 신호의 한계와 와류 때문에 고속 라이다 센서를 장착한 드론을 이용한 조사가 불가능하다. 기존 연구에서는 견인방식을 이용한 단일채널 Lidar 센서를 3차원 형상화 장비가 구현되어 적용되었다. 관성(IMU)센서 데이터를 바탕으로 탐사시 발생하는 회전 운동과 진자운동에 대한 보정이 이루어졌고, 인접 측정데이터 간의 유사성 검토를 통해 정밀 보정을 수행하였으나 탐사 깊이가 깊어질수록 오차가 누적되는 현상이 발견되었다(Kim et al.(2020)). 본 논문에서는 다중채널 Lidar 센서를 적용하여 견인장치에 의해 상승이동하면서 연속적인 단면데이터가 수집되었다. 다중채널 Lidar의 방사 특성 때문에 발생하는 데이터 중첩성을 이용하여 동일 심도의 측정데이터 간의 유사성을 통해 회전운동을 정밀 보정하기 위한 기법이 적용되었다. 180 m 심도의 수직갱도에서 구현된 탐사장비를 이용하여 0~165 m 구간이 조사하여 수직갱도의 형상이 3차원 그래픽으로 재구성되었다.

Supersonic Moist Air Flow with Condensation in a Wavy Wall Channel

  • Ahn, Hyung-Joon;Kwon, Soon-Bum
    • Journal of Mechanical Science and Technology
    • /
    • 제15권4호
    • /
    • pp.492-499
    • /
    • 2001
  • The characteristics of Prand시-Meyer expansion of supersonic flow with condensation along a wavy wall in a channel are investigated by means of experiments and numerical analyses. Experiments are carried out for the case of moist air flow in an intermittent indraft supersonic wind tunnel. The flow fields are visualized by a Schlieren system and the distributions of static pressure along the upper wavy wall are measured by a scanning valve system with pressure transducers. In numerical analyses, the distributions of streamlines, Mach lines, iso-pressure lines, and iso-mass fractions of liquid are obtained by the two-dimensional direct marching method of characteristics. The effects of stagnation temperature, absolute humidity, and attack angle of the upper wavy wall on the generation and the locations of generation and reflection of an oblique shock wave are clarified. Futhermore, it is confirmed that the wavy wall plays an important role in the generation of an oblique shock wave and that the effect of condensation on the flow fields is apparent.

  • PDF

빠른 채널 탐색을 고려한 Fast Handoff 방식의 성능분석 (Performance Analysis of Fast Handoff Scheme based on Fast Channel Scanning)

  • 신재흥;윤홍;이상철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.199-203
    • /
    • 2006
  • 무선통신 환경에서 단말의 이동에 의해 발생되는 끊김 현상을 제거하고, 지속적인 서비스를 제공하기 위해서는 빠른 핸드오프(Handoff) 방식이 필요하다. 본 논문에서는 모든 채널을 탐색한 후, 가장 상태가 좋은 채널을 선택하는 기존 방식을 개선한다. 각 AP(Access Point)가 현재 사용하고 있는 채널정보와 ACR(Access Control Router)가 제공하는 인접 AP들 정 보의 주기적인 NEB-ADV에 포함하여 이동단말에 제공 한다. 본 논문에서는 정보를 습득한 단말이 인접한 AP들의 사용 채널만 탐색하는 새로운 Fast Channel Detection(FCD)방식을 제안한다. 제안하는 방식은 기존 방식과 비교하여 채널탐색 시간이 감소되므로 총 지연시간을 감소시킨다. 제안된 방식에 대한 시뮬레이션 모델을 통해서 링크 효율성과 블록킹 확률의 비교 분석을 통하여 제안방식의 우수성을 입증한다.

  • PDF

Structural and Electrical Features of Solution-Processed Li-doped ZnO Thin Film Transistor Post-Treated by Ambient Conditions

  • Kang, Tae-Sung;Koo, Jay-Hyun;Kim, Tae-Yoon;Hong, Jin-Pyo
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.242-242
    • /
    • 2012
  • Transparent oxide semiconductors are increasingly becoming one of good candidates for high efficient channel materials of thin film transistors (TFTs) in large-area display industries. Compare to the conventional hydrogenated amorphous silicon channel layers, solution processed ZnO-TFTs can be simply fabricated at low temperature by just using a spin coating method without vacuum deposition, thus providing low manufacturing cost. Furthermore, solution based oxide TFT exhibits excellent transparency and enables to apply flexible devices. For this reason, this process has been attracting much attention as one fabrication method for oxide channel layer in thin-film transistors (TFTs). But, poor electrical characteristic of these solution based oxide materials still remains one of issuable problems due to oxygen vacancy formed by breaking weak chemical bonds during fabrication. These electrical properties are expected due to the generation of a large number of conducting carriers, resulting in huge electron scattering effect. Therefore, we study a novel technique to effectively improve the electron mobility by applying environmental annealing treatments with various gases to the solution based Li-doped ZnO TFTs. This technique was systematically designed to vary a different lithium ratio in order to confirm the electrical tendency of Li-doped ZnO TFTs. The observations of Scanning Electron Microscopy, Atomic Force Microscopy, and X-ray Photoelectron Spectroscopy were performed to investigate structural properties and elemental composition of our samples. In addition, I-V characteristics were carried out by using Keithley 4,200-Semiconductor Characterization System (4,200-SCS) with 4-probe system.

  • PDF

동시 다중 주사 방식의 초음파 합성구경 빔포머 구조 (Ultrasound Synthetic Aperture Beamformer Architecture Based on the Simultaneous Multi-scanning Approach)

  • 이유화;김승수;안영복;송태경
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권6호
    • /
    • pp.803-810
    • /
    • 2007
  • Although synthetic aperture focusing techniques can improve the spatial resolution of ultrasound imaging, they have not been employed in a commercial product because they require a real-time N-channel beamformer with a tremendously increased hardware complexity for simultaneous beamforming along M multiple lines. In this paper, a hardware-efficient beamformer architecture for synthetic aperture focusing is presented. In contrast to the straightforward design using NM delay calculators, the proposed method utilizes only M delay calculators by sharing the same values among the focusing delays which should be calculated at the same time between the N channels for all imaging points along the M scan lines. In general, synthetic aperture beamforming requires M 2-port memories. In the proposed beamformer, the input data for each channel is first upsampled with a 4-fold interpolator and each polyphase component of the interpolator output is stored into a 2-port memory separately, requiring 4M 2-port memories for each channel. By properly limiting the area formed with the synthetic aperture focusing, the input memory buffer can be implemented with only 4 2-port memories and one short multi-port memory.

밀리미터파 채널사운딩 측정을 위한 이동형 송수신 장치의 개발과 특성평가 (Development and Characterization of Mobile Transceiver for Millimeter-Wave Channel Sounding Measurement)

  • 최종욱
    • 한국인터넷방송통신학회논문지
    • /
    • 제24권3호
    • /
    • pp.35-40
    • /
    • 2024
  • 본 논문에서는 야외 환경에서 약 10 km 거리까지의 대기공간을 이용하여 밀리미터파 대역의 전파를 송수신 및 채널사운딩 측정할 수 있는 장치를 제작하고 그 특성을 알아보았다. 이 장치는 밀리미터파 대역의 전파 특성 연구에 큰 도움이 될 것으로 예상한다. 측정된 수신세기, PDP 등의 데이터를 통해 PathLoss, K-factor, 전파모델 예측치와의 비교 분석등을 할 수 있다. 이동형 송수신 장치는 차량에 탑재되어 송신소와 수신소의 위치를 자유롭게 변경할 수 있으며 거리에 따른 동화기 문제를 해결하기 위해 루비듐 원자시계를 사용하였다. 안테나의 주요 섹터를 찾기 위해 스캐닝을 활용한 자동 보어사이트 정렬 기능을 적용하였다.

Interference-filter-based stereoscopic 3D LCD

  • Simon, Arnold;Prager, M. G.;Schwarz, S.;Fritz, M.;Jorke, H.
    • Journal of Information Display
    • /
    • 제11권1호
    • /
    • pp.24-27
    • /
    • 2010
  • A novel stereo 3D LCD for passive interference filter glasses is presented. A demonstrator based on a standard 120Hz LCD was set up. Stereoscopic image separation was realized in a time-sequential mode using a LED-based scanning backlight with two complementary spectra. A stereo brightness of 3 cd/$m^2$ and a channel separation of 30:1 were achieved.

비인가 모바일 AP 탐지를 위한 채널 스캔의 구현에 관한 연구 (An Implementation of Wireless Channel Scanning for Unauthorized Mobile APs Detection)

  • 황재룡
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 춘계학술대회
    • /
    • pp.363-364
    • /
    • 2015
  • 모바일 WiFi 핫스팟은 비인가 WiFi 서비스 제한구역에서 내부자료 유출 및 수집과 같은 보안상 문제점을 일으킨다. 이에 따라 본 논문에서는 무선랜 드라이버를 수정하여 주기적으로 무선 채널을 탐색하는 탐지기를 구현한다.

  • PDF

Interference filter based stereoscopic 3D-LCD

  • Jorke, Helmut;Parger, Marc;Simon, Arnold;Schwarz, Sergej;Fritz, Markus
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.441-442
    • /
    • 2009
  • A wavelength multiplexing based stereoscopic 3D-LCD will be introduced. A new 120 Hz scanning RGB-backlight unit was developed. This backlight module was combined with a standard 120Hz LCD. The 3D-LCD based on interference filter glasses offers an outstanding channel separation and a wide viewing angl.

  • PDF