• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.899-902
• /
• 2007

RFID(Radio Frequency IDentification) 시스템에서는 리더와 태그가 무선으로 통신을 하기 때문에 리더와 태그의 수가 많아지게 되면 서로간에 신호의 충돌이 발생한다. 이러한 충돌을 해결하기 위해서는 각각의 리더가 서로 다른 시간에 동작하거나 사용하는 채널을 달리하여 충돌을 해결할 수 있다. 본 논문에서는 셀 분할 기법을 적용하고 각각의 셀이 채널 운용을 다르게 하도록 하여 충돌문제를 해결하였다. 그 방법으로 주파수 호핑(Frequency Hopping) 방식과 CCA(Clear Channel Assessment) 기법을 사용할 것을 제안한다. 그리고 제안한 방법을 시뮬레이션 하기 위해 모델링 하는 방법에 대해 살펴 보겠다.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.1-9
• /
• 2015

Recently, cognitive radio technology has been spotlighted for the efficient use of limited frequency technology. The most important part of CR is to protect the incumbent user's communications. Therefore, CR user should be sensing the currently using channel and another hopping channel for sudden appearance of the Incumbent User. In this paper, we propose the cooperative channel sensing to protect the IU considering each CR user's remained power and sensing-zone, sense the spectrum bands in a fairly distributed manner and share the results among the users within respective sensing zone. Sensing scheme including inband sensing and outband sensing is utilized. The inband sensing is in charge of current using channel scanning while the outband sensing mainly cares about other channels. The performance results by computer simulations show that our sensing scheduling scheme reduces the number of sensing nodes and saves energy need to channel sensing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.724-729
• /
• 2008

This paper presents the calculation of the required bandwidth of common frequency bandwidth applying queueing theory for maximizing the efficiency of frequency resource of WPAN(Wireless Personal Area Network) based Digital acoustic and communication devices. It assumed that LBT device(ZigBee) and FH devices (DCP, RFID and Bluetooth) coexist in the common frequency band for WPAN based Digital acoustic and communication devices. Frequency hopping (FH) and listen before talk (LBT) have been used for interference avoidance in the short range device (SRD). The LBT system transmits data after searching for usable frequency bandwidth in the radio wave environment. However, the FH system transmits data without searching for usable frequency bandwidth. The queuing theory is employed to model the FH and LBT system, respectively. As a result, the throughput for each channel was analyzed by processing the usage frequency and the interval of service time for each channel statistically. When common frequency bandwidth is shared with SRD using 250mW, it was known that about 35 channels were required at the condition of throughput 84%, which was determined with the input condition of Gaussian distribution implying safety communication. Therefore, the common frequency bandwidth is estimated with multiplying the number of channel by the bandwidth per channel. These methodology will be useful for the efficient usage of frequency bandwidth.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.14-18
• /
• 2015

Electronic warfare recently has became the core of modern warfare and the importance of communication survivability is being considerable day by day. In this paper, we propose an effective jamming avoidance algorithm aginst widely used jamming environment such as GPS jamming. In order to simulate to show our system performance, we consider IEEE 802.16 WiMAX protocol and partial band jamming envoriment. Proposed algorithm can improve channel capacity through subchannelization and we show channel capacity corresponding to subchannel parameter.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.601-609
• /
• 2013

One of the most serious factors constraining the next generation cellular mobile consumer communication systems will be the severe co-channel interference experienced at the cell edge. Such a capacity-degrading impairment combined with the limited available spectrum resource makes it essential to develop more spectrally efficient solutions to enhance the system performance and enrich the mobile user's application services. This paper proposes a unique hybrid method of frequency hopping (FH) and subcarrier-reuse-partitioning that can maximize the system capacity by efficiently utilizing the available spectrum while at the same time reduce the co-channel interference effect. The main feature of the proposed method is that it applies an optimal combination of different frequency reuse factors (FRF) and FH-subcarrier allocation patterns into the partitioned cell regions. From the simulation results, it is shown that the proposed method can achieve the optimum number of subcarrier subsets according to the frequency-reuse distance and results in better performance than the fixed FRF methods, for a given partitioning arrangement. The results are presented in the context of both blocking probability and BER performances. It will also be shown how the proposed scheme is well suited to FH-OFDMA based cellular systems aiming at low co-channel interference performance and optimized number of subcarriers.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.133-133
• /
• 2001

무선 근거리 지역망(Wireless LAN;WLAN) 환경에서 다중 채널을 이용하여 실시간 서비스를 제공하기 위한 매체 접근제어 계층에서의 채널의 사용 구간 할당 방법을 제안하고, 컴퓨터 모의 실험을 통하여 제한된 방식의 실시간 서비스 지원 성능과 채널의 사용 효율을 분석한다. 제안한 채널 사용 구간 할당 방안은 개선된 매체 접근 제어 프로토콜 RICH-DP (Receiver-Initiated Channel-Hopping with Dual Polling)를 바탕으로 한다. 무선 환경에서 RTS-CTS를 사용하는 프로토콜은 SRMA, MACA, MACAW, IEEE 802.11, FAMA 등이 있다. 최근에 단일 채널을 환경에서 RICH(Receiver Initiated Channel-Mopping) 프로토콜이 제안되었다. RICH는 충돌 회피를 위해서 경쟁 구간에서 충돌 감지(carrier sensing)을 사용한다. RICH는 제한된 어플케이션에 국한되는 단절이 있다. 반면에 RICH-DP는 다중 채널 환경에서 충돌 감지와 특별한 코드(spreading code) 할당 없이 일반화된 충돌 회피를 제공한다. 실시간 서비스를 이용하자 차는 단말들로 하여금 RICH-DP를 사용하여 서비스를 제공할 때, 대역폭에 대한 정보를 AP(Access Point)로 전송토록 함으로써 비경쟁 구간에서 뿐 아니라, 경쟁구간에서도 높은 채널 효율이 얻어질 수 있도록 하고 있다. 제한된 방안의 성능 평가를 위한 모의 실험은 OPNET를 이용하여 실시간 서비스 데이터를 7개의 상태 천이를 갖는 VBR 소스로 모델링하고 비동기 트래픽들은 Poisson 소스로 모델링하여 실시간 서비스 단발들의 이용 대역폭과 채널 처리율과 시스템 지연시간을 성능 평가 인자로 하여 수행하였다. 논문에서 제한된 방법을 적용한 개선된 RICH-DP을 모의 실험을 통하여 분석한 결과 기존의 제한된 RICH-DP는 실시간 서비스에 대한 처리율이 낮아지며 서비스 시간이 보장되지 못했다. 따라서 실시간 서비스에 대한 새로운 제안된 기법을 제안하고 성능 평가한 결과 기존의 RICH-DP보다 성능이 향상됨을 확인 할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.730-738
• /
• 1992

This paper alms to analyse the performance of frequency hopping /spread spectrum multiple access system by employing the channel with mixture of AWGN, partial band Jamming, fading and user interference. The performance analysis of FH /SSMA system, taking account of frequency 'hit'(user Interference ) which occurs in the presence of multiple user, produces the following numerical results by computing error probability and throughput of each code in two cases whether the side Information about channel is used or not. The numerical results are as follows : When composite interferences coexist In channel, RS code Is significantly superior to convolutional code in terms of performance. Concatenated code provides the same performance as RS code. The above results show that RS code is pertinent as error-correction code.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.149-151
• /
• 2014

DVB-S2/RCS (Digital Video Broadcasting - Satellite/Return Channel via Satellite)는 위성 방송 및 데이터 통신을 위한 표준으로서 높은 통신 품질 및 향상된 위성 자원 이용을 위해 수립되었다. DVB-RCS 의 MF-TDMA (Multi-Frequency Time Division Multiple Access)는 동적인 자원할당이 가능하며, 이에 따라 통신 요구 사항이 증가하는 군 위성 통신 체계로의 적용 연구가 활발하게 진행 중이다. 그러나 기존 MF-TDMA 위성 통신은 군 통신에 필수적인 항재밍에 대한 고려가 부족한 실정이다. 부분대역 재밍시, 다구의 RCST (Return Channel Satellite Terminal)에 통신 저하를 초래 할 수 있으며, 망 자원을 관리하는 제어 채널의 재밍으로 다수 RCST 의 채널 탈퇴를 초래할 가능성이 있다. 본 논문에서는 부분대역 재밍 시 RCST 의 통신 저하를 최소화하며, 제어 채널 재밍으로 인한 다구 RCST 의 채널 탈퇴를 예방하는 자원할당 알고리즘을 제안한다. 제안 기법은 다양한 대역폭을 지원하는 MF-TDMA 에 적용 가능함으로써 다양한 장비가 혼재하는 군사 환경에 매우 적합하다. 시뮬레이션을 통해 제어 채널의 재밍 확률과, RCST 의 자원할당 효율을 기존 자원할당 알고리즘과 비교하였으며, 제안한 알고리즘이 우수한 성능을 보임을 확인 하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.527-536
• /
• 2021

In wireless environments, wideband receivers are used in a communication intelligent system to detect unknown signals and obtain azimuth information. To design a wideband receiver that performs multiple signal detection and direction finding simultaneously, it is necessary to consider a reception structure composed of multiple channels. In this paper, we propose a wideband multi-channel receiver for direction finding of unknown wideband communication signals including frequency hopping signals. A signal processing method for detecting received signals and estimating azimuth information is presented, and components of the manufactured wideband receiver are described. In addition, test results of the signal detection performance by mounting the proposed wideband multi-channel receiver on the flight system are included.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2001

In this paper, we evaluated the performance of Orthogonal MC/FH-CDMA system considering the hit of frequency hopping patterns, and obtained the degree of the performance improvement by adopting TCM scheme under frequency selective Rayleigh fading channel. From the performance analysis, it is known that the error performance is improved, since delay time relative to symbol time is reduced as the number of carrier is increased. On the other hand, it is found that BER performance is improved about $5{\times}10^{-2}$ degree by adopting TCM scheme, and higher S/N is required if the QoS of voice (BER = $10^{-3}$) must be achieved.