• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1804-1820
• /
• 1997

In this paper, an efficient call control procedure is presented for next generation wireless ATM networks and its performance is mathematically analyzed using the open queueing network. This procedure is based on a new scheme called as the cell clustering. When we use the cell clustering scheme, at the time that a mobile connection is admitted to the network, a virtual cell is constructed by choosing a group of neighboring base stations to which the call may probabilistically hand over and by assigning to the call a collection of virtual paths between the base stations. Within a microcell/picocell environment, it is seen that the cell clustering can support effectively a very high rate of handovers, provides very high system capacity, and guarantees a high degree of frequency reuse over the same geographical region without requiring the intervention of the network call control processor each time a handover occurs. But since mobiles, once admitted, are free to roam within the virtual cell, overload condition occurs in which the number of calls to be handled by one base station to exceed that cell site's capacity of radio channel. When an overload condition happens, the quality of service is abruptly degraded. We refer to this as the overload state and in order to quantify the degree of degradation we define two metrics, the probability of overload and the normalized average time spent in the overload state. By using the open network queueing model, we derive closed form expressions for the maximum number of calls that can be admitted into the virtual cell such that the two defined metrics are used as the acceptance criteria for call admission control.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.9 no.2
• /
• pp.10-24
• /
• 2005

Background and Purpose: Feeling the pulse is based on the pulse condition and alteration to observe the condition of the human body's health and by using a healthy person's pulse as a standard we are able to analyze the patient's pulse to find the attacked channel and collateral, viscera and bowels and understand the pathology such as diseases caused by exogenous evil, disorder of internal organs, and seven modes of emotions. Observing the color and shade of the patient's face, listening carefully to the sound of the patient, and feeling the pulse are methods in accordance with Su Wen 'Plain Questions', 'The Classic on Difficulty' (5th century B.C. Bianque), 'The Classic of Sphymology' (280 A.D. Wang Xi), 'Pulse Formulas' (1189 A.D. Cui Jiayan), and is systematically edited for those who have started studying to easily reach the profound state. Therefore, 'The Elementary Course for Medicine' has been used from ancient times as the textbook for diagnostics. Methods: In this Study, we will inspect commonly used pulse feeling methods, the inch, bar, cubit thesis, the viscera and bowels thesis from The Elementary Course for Medicine and inquire the difference of the text from 'Plain Questions of Huangdi's Internal Classic', 'Treatise on Febrile Diseases', 'Classic on Difficulty'. Results and Conclusion: 1. In 'The Elementary Course for Medicine' the site of the wrist along the pulsation of the radial artery is divided into inch, bar, cubit and has defined the inch, bar, cubit crossways. 2. In 'The Elementary Course of Medicine' the inch, bar, cubit for the left hand and right hand is subjected to each viscera and bowel. By assigning the left hand's inch, bar, cubit to the cardial orb, the hepatic orb, the renal orb, and the right hand's inch, bar, cubit to the pulmonic orb, the splenic orb, the vital gate it has been able to feel the pulse for each viscera and bowel by using the interpromoting and interacting relation of the five evolutive phases.

• Childhood Kidney Diseases
• /
• v.17 no.2
• /
• pp.137-142
• /
• 2013

Pseudohypoaldosteronism (PHA) is a condition characterized by renal salt wasting, hyperkalemia, and metabolic acidosis due to renal tubular resistance to aldosterone. Systemic PHA1 is a more severe condition caused by defective transepithelial sodium transport due to mutations in the genes encoding the ${\alpha}$ (SCNN1A), ${\beta}$ (SCNN1B), or ${\gamma}$ (SCNN1G) subunits of the epithelial sodium channel at the collecting duct, and involves the sweat glands, salivary glands, colon, and lung. Although systemic PHA1 is a rare disease, we believe that genetic studies should be performed in patients with normal renal function but with high plasma renin and aldosterone levels, without a history of potassium-sparing diuretic use or obstructive uropathy. In the present report, we describe a case of autosomal recessive PHA1 that was genetically diagnosed in a newborn after severe hyperkalemia was noted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.732-740
• /
• 2019

Evaporative humidification using a humidifying element is widely used for humidification of a building or a data center. The performance of a humidifying element is commonly expressed as humidification efficiency, which is used independent of air temperature, humidity and water temperature. In this study, a series of tests were conducted at two air conditions (data center and commercial building) using two different humidifying elements (cellulose/PET and Glasdek) changing the frontal air velocity and water temperature. Results showed that the measured humidification efficiency was dependent on the air condition and water temperature. In fact, even dehumidification occurred at the inlet of the humidifying element at the air condition of commercial building. The reason was due to the inlet water temperature, which was lower than the dew point air temperature. As the difference between the inlet water and the dew point air temperature increased, the humidification efficiency decreased. This suggest that proper thermal model should account for the inlet region, where the amount of moisture transfer may be different from the other part of the humidification element. A simple analysis on the thermal performance of the cellulose/PET humidification element showed that the Sherwood number was adequately predicted, whereas the friction factor was ovepredicted, probably due to the simplification of the channel geometry and the neglection of the water film on the element surface.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.137-151
• /
• 2019

Geophysical exploration techniques are effective for monitoring changes in the ground condition around the excavation project to prevent subsidence risks during excavation work, therefore, improving analysis techniques is required for applying and supplementing various geophysical exploration technologies. In this study, a field-scale on-site test was conducted to detect possible ground subsidence hazards and areas of relaxation zone that may occur during excavation work and due to underground water level changes. In order to carry out the field test, a real-scale excavation test bed was constructed and the geophysical exploration methods, such as electrical resistivity survey and multi-channel analysis of surface wave (MASW) survey for urban sites condition, have researched for optimal geophysical exploration parameter, design and correlation analysis between the results by reviewing the validity of each individual geophysical exploration and modeling. The results of this study showed the impact of each geophysical exploration on the relaxation zone and, in particular, the location of the underground water surface and the effects of excavation were identified using electrical resistivity survey. Further research on modeling will be required, taking into account the effects of excavation and groundwater.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.147-156
• /
• 2023

Because the behavior of cable bridges is dominated by dynamic response and is relatively complex, short- and long-term field monitoring are often required to evaluate the bridge condition. If a permanent SHMS (Structural Health Monitoring System) is not installed, a portable monitoring system is needed for the checking of bridge condition. In this case, it can be difficult to operate the portable monitoring system due to limited conditions such as power and communication according to the location and type of the bridge. In this study, the portable-based smart structural response monitoring system is developed that can be effectively used for short- and long-term monitoring of cable bridges in Korea and Southeast Asia. The developed system is a multi-channel portable data acquisition and analyzer that can be operated for a long time in the field using its own power supply system, and is included with the automated analysis algorithm for the dynamic characteristics of cable bridges using real-time data. In order to evaluate the field applicability of the developed system, field demonstration was conducted on cable bridges in Korea and Vietnam. Through the demonstration, the reliability and efficiency of field operation of the developed system were confirmed, and additionally, the possibility of application to overseas markets was confirmed in cable bridge monitoring field.

• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.288-294
• /
• 2009

Flow field-flow fractionation (Fl-FFF) device has been widely used to verify the size and molecular weight of various colloids and organics. The Fl-FFF, however, generally uses carrier solutions with only low to moderate ionic strengths to exclude the high affinity of materials to the membrane under high ionic strength conditions. Thus, materials existing in seawaters have not been accurately analysed based on the hydrodynamic size and molecular weight using current Fl-FFF techniques. The highest ionic strength tested was up to 0.1 M, while seawater ionic strength is about 0.6 M. The aim of this study is to accurately measure the hydrodynamic size of particles under carrier solutions close to seawater conditions with the Fl-FFF. By employing various operating conditions during the Fl-FFF analyses, it was demonstrated that the flow conditions, the concentration of surfactants, and stabilization times were key factors in acquiring compatible data. Results have shown that the cross flow was more influential factor than the channel flow. The concentration of the surfactant was to be at least 0.05% and the minimum 15 hr of stabilization was needed for accurate and reproducible data acquisition under seawater condition.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.374-383
• /
• 2008

IEEE 802.11 WLANs support various data rates in order to adapt to wireless channel condition. It is known that when some WLAN stations use a lower data rate than the others, total throughput is considerably degraded. The concept of temporal fairness which provides equal time to all stations has been introduced to alleviate this performance anomaly problem. However, most previous mechanisms assume that stations have infinite backlogs in the MAC layer and do not consider transport layer. In this paper, we first examine and analyze the performance of previous methods considering transport layer protocols. We then propose two new temporal fairness guarantee methods: AP priority and dynamic CWmin adjustment. We carried out extensive performance study via ns-2 computer simulations. The results show that the proposed methods provide temporal fairness and improve the throughput of WLANs in various environments.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.69-75
• /
• 2016

Bubble size is a key parameter for an accurate prediction of bubble behaviours in the multi-dimensional two-phase flow. In the current STAR CCM+ CFD code, a mechanistic bubble size model $S{\gamma}$ is available for the prediction of bubble size in the flow channel. As another model, Yun model is developed based on DEBORA that is subcooled boiling data in high pressure. In this study, numerical simulation for the gas-liquid two-phase flow was conducted to validate and confirm the performance of $S{\gamma}$ model and Yun model, using the commercial CFD code STAR CCM+ ver. 10.02. For this, local bubble models was evaluated against the air-water data from DEDALE experiments (1995) and Hibiki et al. (2001) in the vertical pipe. All numerical results of $S{\gamma}$ model predicted reasonably the two-phase flow parameters and Yun model is needed to be improved for the prediction of air-water flow under low pressure condition.