• Journal of Surface Science and Engineering
• /
• v.50 no.6
• /
• pp.516-522
• /
• 2017

We report the growth of carbon nanotubes (CNT) on Invar-42 plates using coal tar pitch (CTP) by chemical vapor deposition (CVD) method. The solid phase CTP is used as an inexpensive carbon source since it produces a bunch of hydrocarbon gases such as $CH_4$ and other $C_xH_v$ by thermal decomposition over $450^{\circ}C$. The Invar-42 is a representative Ni-based ferrous alloy and can be used repetitively as a substrate for CNT growth because Ni and Fe are used as very active catalytic elements. We changed mixing ratio of carrier gases, argon and hydrogen, and temperature of growth region. It was found that the optimum gas ratio and temperature for high quality CNT growth are $Ar:H_2=400:400$ sccm and $1000^{\circ}C$, respectively. In addition, the carbon nanoball (CNB) was also obtained by just changing the mixing ratio to $Ar:H_2=100:600$ sccm. Finally, CTP can be employed as a versatile carbon source to produce various carbon-based nanomaterials, such as CNT and CNB.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1571-1573
• /
• 2003

Diamond films including nanocystalline and graphite phase are grown by microwave plasma chemical vapor deposition using $N_2$ additives and negative substrate bias at growth step. The microstructure of the films is controlled by changing $N_2$ gas ratio and negative bias. Defects and grain boundaries between diamond and graphite are proposed to be crucial factors for forming the conducting path of electron emissions. The effect of growth parameters on the film microstructure are investigated by Raman spectroscopy and scanning electron microscopy(SEM). Electron emission characteristics are also examined in terms of the film growth conditions.

• Journal of Animal Science and Technology
• /
• v.57 no.5
• /
• pp.19.1-19.6
• /
• 2015

The objective of this study was to estimate variance components and genetic parameters for growth curve parameters in Guilan sheep. Studied traits were parameters of Brody growth model which included A (asymptotic mature weight), B (initial animal weight) and K (maturation rate). The data set and pedigree information used in this study were obtained from the Agricultural Organization of Guilan province (Rasht, Iran) and comprised 8647 growth curve records of lambs from birth to 240 days of age during 1994 to 2014. Marginal posterior distributions of parameters and variance components were estimated using TM program. The Gibbs sampler was run 300000 rounds and the first 60000 rounds were discarded as a burn-in period. Posterior mean estimates of direct heritabilities for A, B and K were 0.39, 0.23 and 0.039, respectively. Estimates of direct genetic correlation between growth curve parameters were 0.57, 0.03 and -0.01 between A-B, A-K and B-K, respectively. Estimates of direct genetic trends for A, B and K were positive and their corresponding values were $0.014{\pm}0.003$ (P < 0.001), $0.0012{\pm}0.0009$ (P > 0.05) and $0.000002{\pm}0.0001$ (P > 0.05), respectively. Residual correlations between growth curve parameters varied form -0.52 (between A-K) to 0.48 (between A-B). Also, phenotypic correlations between growth curve parameters varied form -0.49 (between A-K) to 0.47 (between A-B). The results of this study indicated that improvement of growth curve parameters of Guilan sheep seems feasible in selection programs. It is worthwhile to develop a selection strategy to obtain an appropriate shape of growth curve through changing genetically the parameters of growth model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.4
• /
• pp.465-482
• /
• 2024

The global use of groundwater in coastal areas has increased. Events such as seawater intrusion (SWI) are expected to increase along with the acceleration of natural disasters owing to environmental changes such as climate change, resulting in large-scale damage worldwide. Current trends in the research of coastal groundwater and related natural disasters include testing and verifying technologies using major case studies from individual countries. We identified global research trends in coastal groundwater, related these trends to changing environments and climate, and confirmed the qualitative and quantitative growth of these studies. This study describes the theoretical background and techniques for coastal groundwater analysis and details regional-scale SWI indicators based on analytical and numerical studies. This review highlights recent technologies that consider uncertainty and promotes discussions on field data obtained using new technologies. Finally, the research findings and trends for a regional coastal aquifer in Korea are discussed to describe recent SWI approaches for groundwater resources.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.232-232
• /
• 2010

Recently light emitting diodes (LEDs) have been expected as the new generation light sources because of their advantages such as small size, long lifetime and energy-saving. GaN, as a wide band gap material, is widely used as a material of LEDs and GaN nanorods are the one of the most widely investigated nanostructure which has advantages for the light extraction of LEDs and increasing the active area by making the cylindrical core-shell structure. Lately GaN nanorods are fabricated by various techniques, such as selective area growth, vapor-liquid-solid (VLS) technique. But these techniques have some disadvantages. Selective area growth technique is too complicated and expensive to grow the rods. And in the case of VLS technique, GaN nanorods are not vertically aligned well and the metal catalyst may act as the impurity. So we just tried to grow the GaN nanorods on Si substrate without catalyst to get the vertically well aligned nanorods without impurity. First we deposited the AlN buffer layer on Si substrate which shows more vertical growth mode than sapphire substrate. After the buffer growth, we flew trimethylgallium (TMGa) as the III group source and ammonia as the V group source. And during the GaN growth, we kept the ammonia flow stable and periodically changed the flow rate of TMGa to change the growth mode of the nanorods. Finally, as the optimization, we changed the various growth conditions such as the growth temperature, the working pressure, V/III ratio and the doping level. And we are still in the process to reduce the diameter of the nanorods and to extend the length of the nanorods simultaneously. In this study, we focused on the shape changing of GaN nanorods with different growth conditions. So we confirmed the shape of the nanorods by scanning electron microscope (SEM) and carried out the Photoluminescence (PL) measurement and x-ray diffraction (XRD) to examine the crystal quality difference between samples. Detailed results will be discussed.

• Journal of Technology Innovation
• /
• v.11 no.1
• /
• pp.79-97
• /
• 2003

R&D expenditure of Korean firms has been increasing drastically since 1980 and occupied 84% of total R&D expenditure in 1994. After 1994, however, the growth rate of industry R&D expenditure has dropped below single digit. R&D concentration rate of upper 20 companies declined from 61.9% in 1999 to 49.8% in 2001. The technology trade balance has diverged by 2.8 billion dollars in 2000 compared to around 0.3 billion dollars in 1985. We find several reasons on declining the industry R&D growth rate in Korea. First, we carefully say there might be an crowding out effect in increasing government R&D investment from Granger causality test between industry R&D and government R&D. Second, the decreasing benefit of tax credit since 1992 on industry R&D expenditure has caused the decrease of industry R&D growth rate. Third, the type of R&D cost becomes to similar to matured countries type of cost, which means the portion of capital expenditure has been decreased since late of 1980s. Therefore, industry R&D growth rate gets to saturation point. We draw several policy implications from the changing structure of business R&D of Korean company. Firstly, to stimulate industry R&D investment Korean government needs to strengthen tax credit policy. Secondly, to induce foreign direct investment Korean government needs to establish technology infrastructures and high quality of manpower. To utilize foreign technology resources Korean government need to introduce global R&D program executed by foreign scientist as an Project Leader.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.43-49
• /
• 2002

SB41 material is welded automatically and is investigated some effects of the welding residual stress in the growth and propagation of fatigue crack, so as to study the fatigue behaviour in the welding residual stress field. The summarized results are as follows; 1) In case of the load amplitude is constant, as the stress ratio is changing to 0.1, 0.33 and 0.5 the propagation life is constant but the growth life decreases. And than, when maximum load or minimum load is constant as the stress ratio increases the growth life and propagation life. 2) It was shown that fatigue crack propagation ratio da/dN was almost constant regardless of the stress ratio change at constant load amplitude and that the larger stress ratio, the slower was the fatigue crack propagation ratio. 3) The opening ratio U is influenced by $K_max$ but it isn't only the function of $K_max$ because data range is very large. 4) The fatigue life of the specimens on tensile compressive residual stress field was decreased and increased respectably more than that of the base metal.

• Korean System Dynamics Review
• /
• v.3 no.1
• /
• pp.5-42
• /
• 2002

The main purpose of this paper is analyzing long-term growth possibility of a telecommunication Company (Telco) H. First of all, to achieve this purpose, the precise understanding about causal relations among growth and decay factors of Telco H is required. Based upon the causal analysis, a basic computer simulation model is developed. Finally, several predictive examinations about growth possibility and pattern of the Telco H are conducted using three scenarios. From simulation results, the most important policy leverages are capabilities of market share sustenance, improvement of service quality and squeezing current network facility to elevate profitability and efficiency. Recently, telecommunication industry has become more and more competitive due to introduction of Internet and deregulation. Internet has brought about global competition as well as confusion between telecommunication and broadcasting industries. At the almost same time, deregulation is a universal tendency and a catalyst of unlimited competition. Telco H has been a dominant company in Korea for last century. However, the dominant position of Telco H has been threatened by the change of competition environment. The competitive environment has many elements and keeps changing dynamically. Therefore, System Dynamics simulation methodology is adopted to examine the problem.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.153-159
• /
• 2010

Recently, it has been reported that mechanical stimulation takes a role in improving cell growth. Also, became generally known that skeletal system as bone or cartilage tissues take influence of compression loading. In this study, we fabricated a custom-made bioreactor and analyzed that conditions of compressive loading would influence cell growth. To compare the effect of intermittent compressive loading on cell-encapsulated agarose scaffold, we cultured preosteoblast cell (MC3T3-E1 cells) statically and dynamically. And dynamic culture conditions were produced by changing parameters such as the iteration time and interval delay time. Also, cellencapsulated agarose scaffold were subjected to 10 % dynamic compressive strain at 1㎐ frequency for 7 days. After cell culture, cell proliferation was assessed with PI stain assay for fluorescence images and flow cytometry (FACS).

• Korean Journal of Health Education and Promotion
• /
• v.32 no.5
• /
• pp.43-51
• /
• 2015

Objectives: Socioeconomic factors are one of the significant factors explaining drinking problems in our society. From the poverty and inequality perspective, not only absolute poverty but perceived level of poverty or inequality has a direct effect on one's health and health behaviors. The purpose of the study is to explore the growth trajectories of problem drinking in Korea in relation to poverty and perceived income. Methods: Data from 13,414 adults were analyzed using 4 years of data (2010 to 2014) from the Korea Welfare Panel. Main variables included poverty status, perceived income inequality, and problem drinking. A latent growth modeling was employed for the analysis. Results: The non-poverty group had higher initial level of problem drinking; however, the poverty group showed higher rate of increase in problem drinking rate. The perceived income inequality had no significant influence on the initial level, but over time, those with higher level of perceived income inequality showed higher rate of increase in problem drinking. Conclusions: Findings showed that poverty and inequality affect changes in problem drinking. Efforts to prevent and decrease problems related to alcohol should not only focus on changing individuals' behavior but also on decreasing the inequality gap.