• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.721-728
• /
• 2003

Nowadays, a lot of enterprise completed the ERP implementation and these ERP-based enterprises consider the construction of WMS or already have done it. However the enterprises which Implemented WMS linked with ERP have many problems In the warehouse management and the reason ran be summarized In two poults First. In the integration point of view, only Interface issue between ERP and WMS was taken into account, therefore it was hard to reflect the phased process change. Second, a large number of WMS functions were tried to implement at the same tune and these attempts caused confusion and Instability which Is Interpreted as a main reason of the WMS failure. This paper presents the phased construction method for the successful implementation or WMS and in the integration point or view, the phased process change appears naturally

• Journal of the Korean Data and Information Science Society
• /
• 제26권2호
• /
• pp.547-547
• /
• 2015

• 오토저널
• /
• 제8권1호
• /
• pp.62-74
• /
• 1986

The simulation of power cycle and unsteady gas exchange processes in the inlet and exhaust systems of the single-cylinder 2-stroke cycle compression ignition engine was studied in this paper. In power cycle process, the single-zone model proposed by Whitehouse and Way was used, and the convective and radiative heat transfer from cylinder contents to surroundings was considered. To solve the equations for gas exchange process, the generalized method of characteristics including area change, friction, heat transfer and entropy gradients was used. Also with the path line calculation, the entropy change along the path line and the variation of specific heat due to the change of temperature and the composition of cylinder gas were considered. As a result of the simulation, the change of pressure and temperature in the cylinder against the crank angle, the rate of net heat release, and the change of properties at each point in the inlet and exhaust pipe against the crank angle were obtained. The engine performances under various operating conditions were also calculated.

• 지역연구
• /
• 제10권1호
• /
• pp.19-37
• /
• 1994

The past studies on the change of industrial location can be reinterpreted as spatial determinism, decision making process determinism and industrial sturcure determinism according to the view of the mutual operation between the economic activity and spatial structure. From the point of the industrial structure determinism which focuses on the fact that the locational type of production activity can be differenciated by the structural change of industry itself, it is proper to explain the change of industrial location not only by spatial condition but also by containing the fundamental changing causes for the reorganization of the spatial condition. One of the most important changing causes for reorganizing economic space is industrial technology. This study aims to explain the spatialization process of industrial technology and consists of the process of suggesting the hypothesis that the spatialization process is differentiated according to the production organization as the user of industrial technology and the user of industrial technology and the production system as using method. In other words, this study attempts to internalize the technology variable, which has been treated as external in the past studies on the industrial location, as an independent one and consider the production organization and production system as a paramenter, so that it can represent 'conceptual framework' for explaining the change of industrial location.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.151-152
• /
• 2008

PCM has the ability to change their state, these materials absorb energy during the heating process as a body contact and release energy during a reverse cooling process as phase change take place. Using the thermal energy storage of PCM which has a melting point 15 to $35^{circ}C$ is one of the most effective ideas for utilization in textile finish. In this study, microencapsulated PCM(MCPCM) were synthesized by sol-gel method using the octadecane(or nonadecane) as PCM and the silica as microcapsule materials. To develop smart temperature adaptable textile, coating process was applied to textile substrate using a composition included MCPCM.

• 정보처리학회논문지D
• /
• 제15D권3호
• /
• pp.375-386
• /
• 2008

최근 정보시스템 개발 패러다임이 객체지향 및 컴포넌트 기반으로 변해가고 있으며 이러한 방법론이 소프트웨어 산업계를 주도하고 있다. 소프트웨어 비용측정 분야도 이러한 변화에 적응하기 위해서 OO 환경에 적합한 비용 측정 모델로의 전환이 요구되고 있으며 실제 UCP 기법 등 객체지향 개념의 기능점수 연구가 진행되고 있다. 특히 객체지향 기능점수 측정 기법은 사용사례 중심으로 개발 프로젝트 초기에 적용 가능하고, 개발 진행 단계별 소프트웨어 산출물에 따라 생명주기 전체에 걸쳐서 적용 가능하고, UML 표기법에 의한 사용자와 의사소통으로 이해가 항상 가능하기 때문에 LOC 및 기존 기능점수 측정 기법의 한계를 극복하는 장점이 있다. 따라서 본 논문은 최근 객체지향 정보시스템 개발 환경에서 널리 사용되고 있는 UML 표기법 및 국방 CBD 방법론 절차에 의한 정보시스템 개발 프로젝트 진행에 따라 초기단계 시점(ROFP)과 분석단계 시점(AOFP)에서 기능점수를 측정하며, 전통적인 FPA 모델과 객체지향 FPA 모델을 통해 UML 모델링과 산출물을 기반으로 한 유스케이스와 클래스의 상관도 분석에서 서비스 기능과 객체/클래스 기능을 식별하고 기능점수를 구하는 측정기법을 제안한다. 무엇보다 전통적인 기능점수 측정 기법인 IFPUG-CPM 및 소프트웨어 대가기준의 기능점수 측정기법을 개선하여 객체지향 정보시스템 개발에 적합한 기능점수 측정 프로세스를 제시하고 사례연구를 통한 적합성 평가 결과를 제시한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.143-146
• /
• 2000

In this paper, luminance mapping for uniform color distribution and gamut mapping for maximum chroma reproduction are proposed. In the conventional lightness mapping, the average lightness difference between the two gamut is increased and different color changes in bright and dark regions are also increased. To solve these problems, a lightness mapping is proposed that minimizes the lightness difference of the cusps at each hue angle and produces same color changes in bright and dark regions. Also, chroma mapping that utilize variable anchor point and an anchor point are proposed for maximum chroma reproduction and uniform color change. The proposed algorithm reduce a sudden color change on the gamut boundary of the printer and to maintain a uniform color change during the mapping process. Accordingly, the proposed algorithm can reproduce high quality images with low-cost color devices.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.126-131
• /
• 1999

In order to reduce the length of off-gauge at FGC(Flying gauge change) point, We adopted dynamic set up in No. 4 cold rolling mill. The conventional set-up of FGC(Flying gauge change) was calculated on the basis of preset values in the process control computer, so the difference between actual strip thickness and preset thickness cause long off-gauge. The dynamic SET-UP control was calculated on the basis of actual strip thickness of FGC(Flying gauge change) point from X-ray gauge of mill entry and No.i stand. We applied dynamic SET-UP control in September last year. Compare to the previous result, the length of off-gauge is reduced by about 36%.

• Computers and Concrete
• /
• 제18권2호
• /
• pp.267-278
• /
• 2016

In order to observe the internal damage of concrete in real time, we introduced acoustic emission nondestructive detecting technology into a series of fracture tests; the test results revealed the whole process that concrete undergoes when it sustains damage that leads to failure, according to the change rules of the acoustic emission parameters. The results showed that both the initiation and unstable loads can be accurately determined using the abrupt change of the acoustic emission rate curves and the turning point of the acoustic emission parameters' accumulative curves. The whole process, from damage to failure, includes five phases, beginning with damage, such as cracking, a stable crack growth process, a critical unstable stage, and unstable propagation. The brittle fracture characteristics of concrete change when steel bars are joined, because the steel bars and the concrete structure bond, which causes an increase in the acoustic emission signals within the fracture process of the reinforced concrete. The unstable propagation stage is also extended. Our research results provide a valid methodology and technical explanations, which can help researchers to monitor the cracking process of concrete structures, in real time, during actual projects.

• Steel and Composite Structures
• /
• 제36권5호
• /
• pp.521-531
• /
• 2020

The behavior variation of concrete dam is investigated, based on a new method for analyzing the data model of concrete dam in service process for the limitation of wavelet transform for solving concrete dam service process model. The study takes into account the time and position of behavior change during the process of concrete dam service. There is no dependence on the effect quantity for overcoming the shortcomings of the traditional identification method. The panel data model is firstly proposed for analyzing the behavior change of composite concrete dam. The change-point theory is used to identify whether the behavior of concrete dams changes during service. The phase space reconstruction technique is used to reconstruct the phase plane of the trend effect component. The time dimension method is used to solve the construction of multi-transformation model of composite panel data. An existing 76.3-m-high dam is used to investigate some key issues on the behavior change. Emphasis is placed on conversion time and location for three time periods consistent with the practical analysis report for evaluating the validity of the analysis method of the behavior variation of concrete dams presented in this paper.