• 한국의류학회지
• /
• 제17권2호
• /
• pp.197-206
• /
• 1993

We studied relation between the clothing pressure applied by foundations(waist nipper, girdle, body suit) on the waist of bodies and muscular activity, feeling of tightness. The main results were summerized as follows ; 1. Clothing pressure applied by foundations was high in order of girdle>waist nipper>body suit, also clothing pressure was higher back than front and side, sitting on the chair than standing posture, ventral flection than repose. Individual differences, even if size of body was equal, were shown in clothing pressure applied by foundations with subcutaneous fat's amount in measuring region. 2. The muscular activity of rectus abdominis than obliquus externus abdominis was more affected by foundations in all kinds of postures and motions. Amplitude of electromyogram was high sitting on the chair than standing posture, but there was little difference with motion variation. The wearing girdle strongly affected on the muscular activities of rectus abdominis and obliquus externus abdominis as compared with waist nipper and body suit. 3. The value for feeling of tightness by wearing waist nipper was higher than girdle and body suit. Also the case when sitting on the chair and ventral flection, the value for feeling of tightness was high. When the foundations were on the body, most tightened on the region of the body was anterior abdominal region.

• 대한인간공학회지
• /
• 제19권1호
• /
• pp.23-36
• /
• 2000

In conventional ergonomics, consumer product can be made based on anthropometric data and specific design guideline. However, the product may not satisfy consumers because their emotional preference have not been properly considered in design phase. Therefore, in this study a new chair design process was introduced by which both consumer's emotional need and traditional ergonomic requirement can be satisfied. As a part of the process, the traditional Kansei engineering technique was modified to collect quantitative information of consumer's visual appreciation and physical feedback of various types of chairs. Furthermore, we developed an interface, so called, KADAS(Kamsung Analysis and Design Assistance System), for designers to use the technique in chair design. This software can help designers to understand what should be the most suitable shape in designing items such as seat, back and arm rest, etc. to meet the emotional need of consumers. This software displays the result of modified quantification theory I, and explains how to use the statistics. This study suggested a new approach for ergonomic design incorporated with Kansei Engineering technique. This technique can be also applied to other products by extending the database of KADAS.

• 대한인간공학회지
• /
• 제30권2호
• /
• pp.357-363
• /
• 2011

Objective: The aim of this study is to set the design direction of the lift chair's tilting seat for development. Background: Great attention has been shown to the development of senior friendly product, because of increasing elderly population rapidly in Korea. Therefore, we need to study on sit-to-stand(STS) motion of elderly systematically for developing lift chair that is one of senior friendly products. Method: In this study, we analyzed joint moment(knee, hip) and muscle activity (Erector spinae, Rectus femoris, Vastus lateralis) on STS motion of elderly(female, 60~70: 7) and young people(female, 20~30: 7) using 3 dimension motion capture camera, force plate, wireless EMG. Results: The results of muscle activity showed a similar trend but the results of joint moment were a lot of differences between the young and the elderly. Conclusion: The results of knee joint moment suggest the angle(10~30deg)-adjustable seat that can be better than to find the optimal seat's angle. Application: The method and results of this study are expected to develop senior friendly product and verification as well as be available to various application.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2313-2318
• /
• 2003

By means of flexible forming processes in sheet metal manufacturing it is possible to produce parts of complex geometry within short manufacturing time. These procedures are suitable especially for prototyping or adjustment of deformation. Here formative procedures like laser forming are increasingly important, because they make the large-scale-like production of the prototypes with the required materials possible. High accuracy and reproducibility of the products is the precondition of the production. Due to the lack of a forming tool, complex geometries can hardly be manufactured within tolerances. To overcome this problem an automatic closed loop control system for the adjustment of deformations has been developed. An important element of the closed loop control system is the definition of a suitable irradiation strategy for laser forming. For the determination of the irradiation strategy a lot of influences must be taken into consideration from the field of material, geometry and laser. In this paper the improved closed loop control system and the development of an irradiation strategy for 4 mm deep buckles in an ALMgSi1 sheet will be represented. This system can be used e.g. in the automated adjustment of hail damage in car bodies or deformation by heat treatment.

• 한국CDE학회논문집
• /
• 제13권1호
• /
• pp.45-57
• /
• 2008

A submarine good military weapon because of its confidentiality and intimidating power. Therefore, training warfighters how to maneuver submarine is very important. Because submarine is very expensive and has regional and temporal limitations, M&S(Modeling and Simulation) can be a good alternative. However, as the existing M&S systems of submarine generally use expensive commercial software and dedicated hardware, which cause the warfighters to take troubles to visit the secured places, and then to train themselves during limited time slots. Also, many M&S systems have only one-channel display system which reduces the sense of immersiveness. Another problem is that many heterogeneous simulators can hardly be used as an integrated system. To solve these problems, X3D, a platform-independent and open standard graphic file format, is used with the general-purpose PCs. To increase immersiveness, multi-channel display system and a motion chair are used. Finally, HLA/RTI is used to integrate individual components of the simulator. All of these are verified through experiments.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.776-781
• /
• 2008

In this study, ubiquitous health care system attaching in chair to monitor ECG for health care was developed at the unconsciousness state. The system conveniently and simple measured ECG at non-consciousness. We measured the contact impedance to skin-electrode of metal mesh electrodes of the system. Contact impedance enable the electrode to use for ECG measurement. The results are that the impedance of the metal mesh electrodes according to sizes is low when the size is 4$cm^2$. As the result, when the size of the metal mesh electrode is 4$cm^2$, the electrode is fit for ECG measurement. We can acquired by positing the arm on the metal mesh electrode. The ECG signal was detected using a high-input-impedance bio-amplifier, and then passed filter circuitry. The measured signal transmitted to a PC through the bluetooth wireless communication and monitored. Data of the non-constrained ECG system attaching in chair is noise-data when comparing metal mesh electrode with the Ag/Agcl electrode but the data is significant to monitor ECG for check the body state.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.42-49
• /
• 2013

The global movie industry is continuing rapid growth through application of the latest technology. 3D movies are being produced and shown for a more effective viewing experience. Special chairs for audiences are being experimentally manufactured and installed for the greatest viewing effect. This special chair has a structure that applies vibrating stimuli to specific parts of the body by attaching vibration transducers to theater chairs and synchronizing it with each scene of the movie. In a previous study, it has been confirmed that we can analyze the vibration transfer characteristics of sponge seats through the application of an experimental modal analysis method and obtain design variables easily. In this paper, we examine the major design parameters needed in the development of a foaming sponge seat in which auxiliary springs are inserted to improve the vibration transfer effect of a chair seat. Through analyzing several prototypes by applying experimentation as well as the experimental modal analysis method, it was confirmed that the effect of vibration transfer can be improved through the use of an auxiliary member.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2431-2437
• /
• 2014

In this study, Ni, Ni-Cu and Ni/Cu catalysts were deposited onto C-fiber textiles via the electrophoretic deposition method, and the growth characteristics of carbon nanofibers on the deposited catalyst/C-fiber textiles were investigated. The catalyst deposition onto C-fiber textiles was accomplished by immersing the C-fiber textiles into Ni or Ni-Cu mixed solutions, producing the substrate by post-deposition of Ni onto C-fiber textiles with pre-deposited Cu, and passing it through a gas mixture of $N_2$, $H_2$ and $C_2H_4$ at $700^{\circ}C$ to synthesize carbon nanofibers. For analysis of the characteristics of the synthesized carbon nanofibers and the deposition pattern of catalysts, SEM, EDS, BET, XRD, Raman and XPS analysis were conducted. It was found that the amount of catalyst deposited and the ratio of Ni deposition in the Ni-Cu mixed solution increased with an increasing voltage for electrophoretic deposition. In the case of post-deposition of Ni catalyst onto substrates with pre-deposited Cu, both bimetallic catalyst and carbon nanofibers with a high level of crystallizability were produced. Carbon nanofibers yielded with the catalyst prepared in Ni and Ni-Cu mixed solutions showed a Y-shaped morphology.

• 한국실내디자인학회논문집
• /
• 제13권6호
• /
• pp.140-149
• /
• 2004

The bentwood technique was introduced for the Windsor chair for the first time in the 18th Century. It was Michael Thonet who produced the bentwood chair in Austria around the 1870's, and it has changed the perception of architects and designers since then. The bentwood chair suggested a new and eccentric way of manufacturing furniture and the process of producing materials for it. Moreover, the method of furniture assembling, with screw nails, made a positive contribution not only to the convenience of transport and distribution of furniture to anywhere in the world, but also to the development of mass production of furniture for the multitudes. The bentwood technique of Michael Thonet was developed much further by Alvar Aalto, who inferred a soft curve from nature and developed the beauty of modern laminated bentwood by using birch, a plentiful resource of Finland. This study will help us to understand the functions and process of bentwood furniture, and help to develop technical skills for diverse furniture design. It will also confirm that diverse bentwood furniture design will be possible by applying materials, technical skills and the design process of bentwood according to the characteristics and concept of furniture design.

• Journal of Communications and Networks
• /
• 제7권2호
• /
• pp.104-114
• /
• 2005

This work presents a concept and the related analysis of the traffic performance for a wireless broadband system based on fixed relay stations acting as wireless bridges. The analysis focuses on the important performance indicators end-to-end throughput and delay, taking into account the effects of an automated repeat request protocol. An extension to a MAC frame based access protocol like IEEE 802.11e, 802.15.3, 802.16a, and HIPERLAN2 is outlined and taken as basis for the calculations. The system is intended for both dense populated areas as an overlay to cellular radio systems and to provide wide-area broad-band coverage. The two possible deployment scenarios for both dense urban and wide-area environments are introduced. Analytical and validating simulation results are shown, proving the suitability of the proposed concept for both of the mentioned scenarios. It is established that the fixed relaying concept is well suited to substantially contribute to provide high capacity cellular broad-band radio coverage in next generation (NG) cellular wireless broadband systems.