• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.945-946
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.327-328
• /
• 2010

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2002년도 학술대회
• /
• pp.13-14
• /
• 2002

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권16호
• /
• pp.6919-6922
• /
• 2015

Background: The treatment selection for the oral squamous cell carcinoma remains controversial. Radiation therapy or surgical excision of the lesion can be applied as the sole treatment or it can be used in combination with other treatment modalities. Radiotherapy is considered to be the safest of all the treatment modalities and can be used in several situations for oral and oropharyngeal cancers. The aim of this study was to evaluate the survival outcome differences in patients treated with radical and palliative radiotherapy as the primary treatment modality. Materials and Methods: The study included a total of 47 patients with oral cancer reporting to our hospital between years 2009 to 2010. The age group for the selected patients was more than 65 years, treated with radical and palliative radiotherapy with no prior surgical interventions. Patients were evaluated till Dec 2013 for overall survival time. Results: Twenty nine patients were treated with radical radiotherapy as main stay of treatment, out of which 21 died during the follow up time with median survival of $352{\pm}281.7$ days with 8 patients alive. All the 16 patients were dead who received palliative radiotherapy with a median survival time of $112{\pm}144.0$ days. Conclusions: This retrospective study showed improved overall survival time, loco regional control rates and reduced morbidity in patients treated with radical radiotherapy when compared to patients treated with palliative radiotherapy.

• 한국컴퓨터그래픽스학회논문지
• /
• 제23권5호
• /
• pp.29-38
• /
• 2017

본 논문은 나뭇가지 패턴을 의자의 골격에 임의로 합성하는(Tree-Inspired Chair) 모델링 기법을 제안한다. 여러 개의 입력모델을 합성하는 기존 기법과 다르게, 제안 기법은 하나의 메쉬만 사용하여, 사용자가 원하는 부분의 contour mesh로부터 나무 성장 시뮬레이션으로 생성된 패턴을 갖는 의자 모델링이 가능하다. 우리는 나뭇가지 패턴을 생성시킬 영역 contour mesh를 효율적으로 추출하기 위하여 새로운 기법을 제안한다. 우선, 입력된 모델의 face 면적에 기반한 contour mesh를 생성하고, 그 메쉬의 앞뒷면 정보를 이용하여 연결정보가 복원된 skeleton mesh를 생성한다. 또한, 입력 모델의 형상과 유사하게 나뭇가지 패턴을 생성하기 위해 형상 표면의 tangent vector를 고려하는 3-way 나무성장 시뮬레이션 기법을 제안한다. 제안기법은 기존의 가구 모델을 이용하여 간단한 파라미터의 조작만으로 나뭇가지 형상과 가구 모델의 골격을 결합하는 새로운 형태의 가구 모델링을 보여준다. 우리는 실험을 통하여 제안 기법의 성능과 유효성을 보여주었다.

• Journal of Korean Neurosurgical Society
• /
• 제51권1호
• /
• pp.20-23
• /
• 2012

Objective : To compare radiographic analysis on the sagittal lumbar curve when standing, sitting on a chair, and sitting on the floor. Methods : Thirty asymptomatic volunteers without a history of spinal pathology were recruited. The study population comprised 11 women and 19 men with a mean age of 29.8 years. An independent observer assessed whole lumbar lordosis (WL) and segmental lordosis (SL) between L1 and S1 using the Cobb's angle on lateral radiographs of the lumbar spine obtained from normal individuals when standing, sitting on a chair, and sitting on the floor. WL and SL at each segment were compared for each position. Results : WL when sitting on the floor was reduced by 72.9% than the average of that in the standing position. Of the total decrease in WL, 78% occurred between L4 to S1. There were significant decreases in SL at all lumbar spinal levels, except L1-2, when sitting on the floor as compared to when standing and sitting on a chair. Changes in WL between the positions when sitting on a chair and when sitting on the floor were mostly contributed by the loss of SL at the L4-5 and L5-S1 levels. Conclusion : When sitting on the floor, WL is relatively low; this is mostly because of decreasing lordosis at the L4-5 and L5-S1 levels. In the case of lower lumbar fusion, hyperflexion is expected at the adjacent segment when sitting on the floor. To avoid this, sitting with a lordotic lumbar curve is important. Surgeons should remember to create sufficient lordosis when performing lower lumbar fusion surgery in patients with an oriental life style.

• 한국가구학회지
• /
• 제16권2호
• /
• pp.59-65
• /
• 2005

As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.

• 한국운동역학회지
• /
• 제33권1호
• /
• pp.1-9
• /
• 2023

Objective: This study identifies the difference among the heights of a chair's backrest (High, Mid, No), the biomechanical changes chair users undergo over time, and the variables that can measure musculoskeletal disorders, eventually providing information on the appropriate type of backrest. Method: Eleven healthy subjects in their 20s and 30s who had no experience with musculoskeletal disorders or surgical operations within the last 6 months participated in this study. Computer typing tasks were randomly designated and performed according to the type of chair backrest, and evaluation was performed for Flexion-Relaxation Ratio (FRR) analysis after the computer typing tasks. This study used eight infrared cameras (sampling rate: 100 Hz) and nine-channel electromyography (sampling rate: 1,000 Hz). ANOVA with repeated measures was conducted to verify the results, with the statistical significance level being α = .05. Results: Although there was no significant difference in craniovertebral angle (CVA), this study showed time and interaction effects depending on the height of the backrest (p<.05). When working without the backrest, the head-spine angle was lower compared to the chairs with backrest, based on the computer work. As for the head angle, the higher the back of the chair was, the less the head flexion and the body angle became, whereas the body flexion became less when there was a backrest. In addition, the body flexion increased over time in all types of backrests (p<.05). The muscle activity of the upper body tended to be high in the high backrest chair. On the other hand, a lower muscle activity was found with a low backrest. Conclusion: These results show that a chair is more ergonomic when the body angle is correctly set without bending and when it is supported by a low backrest. Accordingly, this study determines that the backrest affects shoulder and neck musculoskeletal disorders during typing and that medium-height backrest chairs can help prevent musculoskeletal disorders, contrary to the expectation that high-backrest chairs are preferable.

• 대한인간공학회지
• /
• 제34권2호
• /
• pp.151-165
• /
• 2015

Objective: This study aims to develop and scientifically investigate the efficacy of the Spine S-curve Reactive Backrest that responds to the spine curvature of the user when seated, and maintains and enhances the natural S-curve of the lower back, thereby helping to relieve fatigue, correct posture and prevent spine deformities. Background: The focus of current development, design guidelines and/or standards for office chairs is mainly placed on the chair's dimensions, incline angle, adjusting features and lumbar support. Research and development was called for developing a chair backrest that maintains and improves the S-curve of the full spine. Method: The Spine S-curve Reactive Backrest was ergonomically designed to maintain correct posture and enhance user comfort. When leaned on, the backrest responds to the user's spine line and the whole lower back sits closely against the backrest, thereby aligning the user's lower back and backrest as one to maintain and improve the natural S-curve formation of the spine. In order to evaluate the efficacy of the newly designed chair (new design) and the comparison target (chair), five male college students of standard body type with normal spine curvature were selected as test subjects, and a motion analyzer and electromyography were utilized to measure S-curve and erector spinae muscle activity when seated. Results: The spine S-curve was better maintained and improved when sitting in the new design than in the comparison chair. Particularly notable was the greater displacement gap of the thoracic spine than the cervical spine, and also that of the lumbar more than the thoracic spine, with the increase of the backrest tilting angle. Furthermore, the electromyogram results showed the new design caused a lower fatigue level of the erector spinae muscles compared to the comparison chair, and also earned a higher preference in the subjective opinion results. Conclusion: The newly designed chair in this study responds to the user's spine curvature and maintains and enhances the lower back's natural S-curve, and thereby relieves fatigue, promotes better posture, and helps to prevent spine deformities better than existing office chairs. There is a need to widely introduce and supply this new design. Application: The new design is applicable to office and student chairs, and is expected to improve concentration and work efficiency.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.919-920
• /
• 2012