• 한국지역지리학회지
• /
• 제12권5호
• /
• pp.571-582
• /
• 2006

지방행정의 통치 단위인 군현 지역 내에서 한 장소가 중심지로 선정되고 발전하는 것은, 해당 지역의 자연적 조건과 사회적 상황의 결합에 의한 것이다. 이러한 중심지는 사회적 상황 변화에 따라 그 역할이 변화하지만, 역할 변화에도 불구하고 중심지로서의 지리적 관성을 지니게 된다. 본 연구에서는 행정 중심지로서 역할을 수행했던 칠보 지역을 사례로, 중심지의 역할 변화와 지리적 관성 유지의 특성을 살펴보았다. 그 결과는 첫째, 시대에 따라 중심지의 역할이 변화했다. 이 지역은 삼국시대에는 국방 행정 교통의 중심지였으나, 삼국의 통일과 함께 국방 중심지로서의 역할이 사라졌다. 고려시대에 들어서면서 교통축의 변화로 교통 중심지 기능도 상실되었고, 결국 행정 중심지의 기능 상실로 이어졌다. 둘째, 외부 인물과 그 지역 내부 인물의 결합에 의해서 중심성이 유지되었다. 최치원, 정극인, 신잠 등의 외부 인물과 송세림, 정언충, 김약묵, 김관 등의 내부 인물에 의해 행정 중심 기능이 아닌 새로운 유교 문화와 교육의 중심지로서 지리적 관성을 유지했다. 셋째, 중심지의 역할 변화에 따라 미시적으로 지역 내에서 중심지의 입지 이동이 있었다. 시산리의 송산 마을에서 남전 마을 그리고 무성리의 원촌 마을로 중심 장소가 이동되었다.

• 대한두개안면성형외과학회지
• /
• 제19권1호
• /
• pp.13-19
• /
• 2018

Background: $Abb{\acute{e}}$ flap technique is one of the most challenging operations to correct horizontal deficiencies in secondary cleft lip deformity. Since its first introduction, the operative method was dynamically modified from simple variation to complete conceptual change, but conventional $Abb{\acute{e}}$ flap has many drawbacks in esthetic and functional aspect. Our purpose was reconstructing the symmetry of Cupid's bow and central vermilion tubercle with minimal sequalae. Methods: From 2008 to 2016, this technique was applied to 16 secondary cleft lip patients who had total or more than 60% of unilateral deficiency of Cupid's bow and central lip or tubercle pouting deficiency. A quadrangular-shaped flap was transferred from vermilion including skin and white line of central or contralateral lower lip. Pedicle division and insetting were made at 9 (unilateral) or 10 (bilateral) days after transfer. Secondary lip revision was done with open rhinoplasty after wound maturation. Results: Overall satisfaction was high with modified technique. Scar was minimally noticeable on both upper and lower lip especially. Balanced Cupid's bow and symmetric vermilion tubercle were made with relatively small size of flap compared to conventional $Abb{\acute{e}}$ flap. An accompanying benefit was reduced ectropion of lower lip, which made balanced upper and lower lip protrusion with more favorable profile. Conclusion: A new modified $Abb{\acute{e}}$ flap technique showed great satisfaction. It is worth considering in secondary cleft lip patient who has central lip shortage and asymmetry of upper lip vermilion border line. Our technique is one of the substitutes for correction of horizontal and central lip deficiency with asymmetric Cupid's bow.

• 대한치과보철학회지
• /
• 제42권1호
• /
• pp.58-72
• /
• 2004

Statement of problem : Clinically, maxillary first premolar has a high risk of fracture. This is thought to be caused by the susceptible figure which the maxillary first premolar has In other words, sharp cusp angles of the premolar is thought to influence this situation. Purpose : This study was to know stress distribution of all-ceramic crown according to the cusp angle. Material and Method : It was manufactured a three dimensional finite element model simplified maxillary first premolar, and then analyzed stress distribution when cusp angle was each $80^{\circ}$, $90^{\circ}$, $100^{\circ}$, $110^{\circ}$ and $120^{\circ}$. Results and conclusion : 1. The von Misses stress showed that stress decreases as cusp angle increases in the central groove of the occlusal surface. 2. It showed that maximum principal stress was centered at the region of the central groove of the occlusal surface and a region which the force was inflicted. And also it appeared high on the lingual and buccal side of finish line. 3. The X axis of normal stress was focused in the central groove of the occlusal surface. The Y axis normal stress appeared high in the central groove of the occlusal surface, buccal and lingual side. 4. The Stress near the finish line showed a low value compared with stress in the region of the central groove of the occlusal surface. 5. It shows that the most dangerous angle for tooth fracture was on $80^{\circ}$ of the cusp angle and low on $120^{\circ}$ of its.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.277-277
• /
• 2022

Lignin modification has been a breeding target for the improvements of forage digestibility and fermentation in whole crop silage(WCS) rice. In rice, gold hull and internode 2 (gh2) was identified as a lignin-deficient mutant. gh2 exhibits a reddish-brown pigmentation in the hull and the internode is located on the short arm of chromosome 2 and codes for cinnamyl-alcohol dehydrogenase (CAD). To develop WCS rice variety improved digestibility and fermentation, we measured acid detergent fiber (ADF), lignin and total digestible nutrient (TDN) calculated from ADF (TDN=88.9-(0.79% × ADF) and performed marker-assisted selection using CAD(Os2g0187800) gene first intron region specific marker with 55 Jungmo1038/J.collection lines. Those lines had lignin content range from 0.82 to 6.61%, ADF from 15.8 to 45.8%, TDN from 52.7 to 78.8 compared to 'Jungmo1038'(1.53,20.7,72.6), 'J.collection'(0.98,12.8,78.8%) and gh2 were introgressed into 44 lines. Considering on these genotype and low-lignin phenotype, we finally selected 2 elite lines(Suweon668, Suweon669). Suweon668 and Suweon669 line are high biomass-low lignin lines that the ADF content is relatively low, even though the dry matter weight is high. Also they have lodging and shattering resistance and glabrous leaf and hull important to improve cattle palatability. Our results will provide that rice can be improved for forage digestibility and fermentation with low lignin concentration.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.83-88
• /
• 2010

이 논문에서는 다양한 불가사리 영상을 판단하여 불가사리를 인식하는 기법을 제안하고자 한다. 아무르불가사리의 단일개체를 인식하는 경우는 불가사리의 오목 특성과 단선 특성을 이용하여 불가사리 여부를 판단할 수 있으나, 다중개체의 경우는 오목과 단선을 이용한 불가사리의 특징 추출이 불가능하기 때문에 불가사리로 인식할 수 없다. 따라서 다중개체의 영역 중심 모멘트와 장선을 이용하여 장선의 표준편차, 장선별 표준편차 값, 상대각 표준편차, 유효편차수 등의 특징을 이용한 인식 기법을 제안하고자 한다. 제안한 기법의 실험 결과 장선의 표준편차 조건이나 상대각의 유효편차수 조건을 만족하지 못하여 인식에 실패한 경우도 있었으나 약 95%의 높은 인식률을 보였다.

• 한국농공학회지
• /
• 제22권2호
• /
• pp.64-82
• /
• 1980

The aim of this thesis, when water permeates dam, is to study the shape of seepage line and seepage quantity. As for the process, various sand model dams of same capacity were constructed in the water tank : they are a central, middle, inclined, up and down stream point of which is paralled, and filter-installed types. And the slope of seepage line and seepage quantity in these various models for experiment were measured, observed data were analyzed, and several formulas which already published were compared and examined. As for the shape of seepage line, the relation between upstream water level and exit: slope of seepage line, near the entrance and exit point, geometrically similar model, and the shape of seepage line filter-installed were examined. As regards to the seepage quantity, several formulas which already published and testing result values were compared and examined, and relation with the slope of seepage line, the seepage quantity, the slope of upstream point, and the upstream water level were mutually studied. Particulary, when horizontal filter was installed, propriety of the existing formulas for effective filter length w as examined, and the relative position of exit point in various. conditions was also studied.

• Restorative Dentistry and Endodontics
• /
• 제37권3호
• /
• pp.180-184
• /
• 2012

Traumatic injuries of the face often involve root fractures especially in anterior teeth. The prognosis and the treatment of the root fracture depend on the extent of the fracture line, general health and patient compliance. This case report outlines a new conservative trial treatment modality to stabilize the maxillary central incisors with horizontal root fracture on the cervical to middle third by fabricating canine guidance to remove loading on the traumatized maxillary central incisors during eccentric movements and thus inducing spontaneous healing of the fractured line between the fragments. Radiographs after thirty months showed adequate healing with no signs of pathological changes including root resorption, ankylosis or displacement. Long term follow-up revealed that vitality, stability and aesthetics were maintained and the patient was satisfied with the outcome.

• 대한수학회보
• /
• 제52권5호
• /
• pp.1495-1515
• /
• 2015

This paper deals with the numerical methods for the reconstruction of the source term in a linear parabolic equation from final overdetermination. We assume that the source term has the form f(x)h(t) and h(t) is given, which guarantees the uniqueness of the inverse problem of determining the source term f(x) from final overdetermination. We present the regularization methods for reconstruction of the source term in the whole real line and with Neumann boundary conditions. Moreover, we show the connection of the solutions between the problem with Neumann boundary conditions and the problem with no boundary conditions (on the whole real line) by using the extension method. Numerical experiments are done for the inverse problem with the boundary conditions.

• Journal of Welding and Joining
• /
• 제22권6호
• /
• pp.43-49
• /
• 2004

In this study, a visual sensor system which can detect I-butt weld joint with height variation and includes a seam tracking algorithm was investigated. Three-dimensional position of an object can be acquired by using the method of distance measurement, i.e., an optical trigonometry which results from the spatial relations between the camera, the object and the structured light by a visible laser. Effects of laser intensity and iris number for the image quality as well as object material were investigated for the optical system design. For the image processing, a region of interest is defined from the whole image and a line image of laser is drew by using the gray level difference in the image. From the drew laser line, the weld joint can be recognized in searching the biggest point position calculated from the central difference method. Through a series of welding experiments, a good tracking performance was confirmed under GMA welding.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.295-298
• /
• 1996

Non-LTE calculations, with the non-thermal ionization effects included, indicated that for electron bombardment, the H$\alpha$ line is widely broadened and shows a strong central reversal. Significant enhancements at the line wings of Ly$\alpha$ and Ly$\beta$ are also predicted at the beginning of the impulsive phase of flares. For the proton bombardment, no strong broadening and no large central reversal are expected. However, due to proton-hydrogen charge exchange, the enhancements at the red wings of Ly$\alpha$ and Ly$\beta$ lines at the early impulsive phase of flares are significant. Our results show that the electron beam can also in some cases generate visible and UV continuum emission in white-light flares. However, at the onset phase, a negative flare may appear within several seconds, due to the increase of the H- opacity. Another spectroscopic signature of energetic particles, i.e. the impact polarization of atomic lines, is also mentioned.