• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.78-85
• /
• 1987

In order for Paldanghomil (winter rye) to be investigated if its grain yield is able to be produced after clipping just before winter season for forage utilization this experiment was carried out under the four sowing dates of four locations in Korea (Chunchon, Suwon, Hwasung and Chungju). In rye clipping plot earlier sowing showed taller plant height, more number of tillers/㎡ and higher forage yield before winter season, indicating the highest forage yield (1803 kg/10a) in Chunchon by sowing of September II. Forage yield of rye before winter season was mainly influenced by plant height and number of tillers/㎡, showing more effect of plant height. Rye plants were more or less affected on winter damages, late heading and short culm by clipping before winter season. Analysis of variance indicated that only number of spikes/㎡ among grain yield components showed the high significance according to the clipping method, and that there showed little variation for other yield components due to the sowing date and clipping method. There showed more grain yield in non-clipping rather than that of clipping plot, indicating the difference of 46kg/10a. This was resulted from short culm and severe winter damages caused by clipping before winter season. Of the grain yield components, number of spikes/㎡ was greatly influenced for grain yield by analysis of stepwise regression. Therefore, grain yield of rye was able to produce after forage utilization before winter season due to the appropriate crop and soil managements, by resulting from the little variation in grain yield between clipping or non-clipping plots and from the higher grain yield by the early sowing.

• Korean Journal of Veterinary Research
• /
• v.38 no.3
• /
• pp.535-543
• /
• 1998

In the present study, we designed and constructed new microdialysis probe in order to improve the efficacy and accuracy of microdialysis method. In addition, extracellular concentrations of GABA, glutamate, aspartate and glycine were monitored with new designed probe in the lateral portion of the ventrocaudal periaqueductal gray using unanesthetized and unrestrained rats. Furthermore, the effect of opiates on release of these amino acids, especially GABA, was analyzed by measuring their concentration in PAG dialysates following veratridine administration in the presence of systemic morphine. The results were summerized as follow : 1. The damaging rates of 1.0mm or 1.5mm window probe were 12.5% or 42.8%, respectively. In the group using 1.5mm window probe, the damaging area was extended into mesencephalic aqueduct because of microdialyzing pressure. 2. Because of the unique design of our probes with an opening facing one side, dialysis occurs in a hemisphere($600{\mu}m$ in mediolateral direction and $100{\mu}m$ in opposite side of the dialysis probe) around the opening rather than in a spherical shaped configuration which is typical of most commercially available probe designs. 3. Glutamate, taurine and glycine were present in the highest concentration in the dialysate sample obtained before treatment with veratridine, whereas, aspartate and GABA were present in the lowest concentration. 4. The concentration of all 5 amino acids increased significantly following $75{\mu}m$ veratridine perfusion into lateral ventrocaudal PAG. 5. There was no significant difference between basal and peak amino acid concentrations according to window sizes. 6. Morphine had no effect on baseline concentrations of amino acids in dialysates obtained from the lateral PAG as compared to saline treated controls. However, following veratridine treatment, morphine selectively affected GABA release in the lateral ventrocaudal PAG as compared to saline treated controls. These results suggest that GABAergic interneurons in the PAG are inhibited by opioids. Therefore, endogenous enkephalins or endorphins may directly inhibit intrinsic GABAergic intemeurons and block their tonic inhibition of PAG-NMR projection neurons. Moreover, new designed probes demonstrate improved efficiency and accuracy in collecting samples as compared to commercial types of microdialysis probes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.227-237
• /
• 2022

The most critical factors for detecting changes in very high-resolution satellite images are building positional inconsistencies and relief displacements caused by satellite side-view. To resolve the above problems, additional processing using a digital elevation model and deep learning approach have been proposed. Unfortunately, these approaches are not sufficiently effective in solving these problems. This study proposed a change detection method that considers both positional and topology information of buildings. Mask R-CNN (Region-based Convolutional Neural Network) was trained on a SpaceNet building detection v2 dataset, and the central points of each building were extracted as building nodes. Then, triangulated irregular network graphs were created on building nodes from temporal images. To extract the area, where there is a structural difference between two graphs, a change index reflecting the similarity of the graphs and differences in the location of building nodes was proposed. Finally, newly changed or deleted buildings were detected by comparing the two graphs. Three pairs of test sites were selected to evaluate the proposed method's effectiveness, and the results showed that changed buildings were detected in the case of side-view satellite images with building positional inconsistencies.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.196-221
• /
• 2011

The Royal Private Shrines or the Samyo(私廟), were dedicated to members of Choseon's royal family who could not be enshrined at the (official) Royal Ancestral Shrine, the Jongmyo(宗廟). The Samyo were constructed at the national level and were systematically managed as such. Because these private Shrines were dedicated to those who couldn't belong to the Jongmyo but were still very important, such as the ruling king's biological father or mother. The details of all royal constructions were included in the State Event Manuals, and with them, the two-dimensional layouts of the Samyo also. From the remaining "Hyunsa-gung Private Tomb Construction Layout Record(顯思宮別廟營建都監儀軌)" of 1824, which is the construction record of Gyeongwoo-gung Shrine(景祐宮) dedicated to Subin, the mother of King Sunjo(純祖), it became possible to investigate the so far unknown "The Painting of Gyeongwoo-gung Shrine", in terms of the year produced, materials used and other situational contexts. The investigation revealed that the "The Painting of Gyeongwoo-gung Shrine" is actually the "Hyunsa-gung Private Tomb Layout" produced by the Royal Construction Bureau. The bureau painted this to build Hyunsa-gung Private Shrine in a separately prepared site outside the court in 1824, according to the royal verdict to close down and move the temporary shrine inside the courtyard dedicated to Subin who had passed away in 1822. As the Construction Bureau must have also produced the Gyeongwoo-gung Shrine Layout, the painter(s) of this layout should exist among the official artists listed in the State Event Manual, but sadly, as their paintings have not survived to this day, we cannot compare their painting styles. The biggest stylistic character of the Painting of Gyeongwoo-gung Shrine is its perfect diagonal composition method and detailed and neat portrayalof the many palace buildings, just as seen in Donggwoldo(東闕圖, Painting of a panoramic view for Changdeokgung and Changgyeonggung Palaces). A well-perceiving architectural painting employs a specific point of view chosen to fit the purpose of the painting, or it can opt to the multi-viewpoint. Korean traditional architectural paintings in early ages utilized the diagonal composition method, the bird-eye viewpoint, or the multi-viewpoint. By the 18th century, detailed but also artistic architectural paintings utilizing the diagonal method are observed. In the early 19th century, the peak of such techniques is exhibited in Donggwoldo(Painting of a panoramic view for Changdeokgung and Changgyeonggung Palaces). From the perfect diagonal composition method employed and the details of the palace buildings numbering almost two hundreds, we can determine that the Painting of Gyeongwoo-gung Shrine also belongs to the same category of the highly technical architectural paintings as Donggwoldo(Painting of a panoramic view for Changdeokgung and Changgyeonggung Palaces). We can also confirm this hypothesis by comparing the painting techniques employed in these two paintings in detailthe way trees and houses are depicted, and the way ground texture is expressed, etc. The unique characteristic of the Painting of Gyeongwoo-gung Shrine is, however, that the area surrounding the central shrine building(正堂), the most important area of the shrine, is drawn using not the diagonal method but the bird-eye viewpoint with the buildings lying flat on both the left and right sides, just as seen in the "Buildings Below the Central Shrine(正堂以下諸處)" in the State Event Manual's Painting Method section. The same viewpoint method is discovered in some other concurrent paintings of common residential buildings, so it is not certain that this particular viewpoint had been a distinctive feature for shrine paintings in general. On the other hand, when the diagonalmethod pointing to the left direction is chosen, the top-left and bottom-right sections of the painting become inevitably empty. This has been the case for the Painting of Gyeongwoo-gung Shrine, but in contrast, Donggwoldo shows perfect screen composition with these empty margins filled up with different types of trees and other objects. Such difference is consistent with the different situational contexts of these two paintings: the Painting of Gyeongwoo-gung Shrine is a simple single-sheet painting, while Donggwoldo is a perfected work of painting book given an official title. Therefore, if Donggwoldo was produced to fulfill the role of depiction and documentation as well as the aesthetic purpose, contrastingly, the Painting of Gyeongwoo-gung Shrine only served the purpose of copying the circumstances of the architecture and projecting them onto the painting.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.141-150
• /
• 2015

Purpose: In the present study, a difference in tear volume between the cornea and the rigid gas permeable (RGP) lens relative to corneal shape and corneal astigmatism was investigated by the alignment fitting status of spherical and aspherical RGP lenses. Methods: Spherical and aspherical RGP lenses were fitted with alignment in 77 subjects (135 eyes) who were in their 20~30s. Tear volume stained with fluorescein was qualitatively analyzed by dividing cornea into center, mid-peripheral and peripheral parts. Results: For the spherical RGP lens fitting, tear volume differences were found in each part in all corneal types. For the aspherical RGP lens fitting, tear volume differences were in each corneal part in symmetric bow tie- and asymmetric bow tie-type corneas. However, the tear was equally distributed from the center to the peripheral part in round- and oval-type corneas. In the group with corneal astigmatism lower than 1.25 D, tear volume between center and peripheral parts, and mid-peripheral and peripheral parts, was different when a spherical RGP lens was fitted. However, tear volume in each part was not different in the group with corneal astigmatism over 1.50 D. Moreover, the tear volumes of the central and mid-peripheral parts were proportionally increased with increasing corneal astigmatism in both spherical and aspherical RGP lenses. Furthermore, aspherical RGP lenses showed greater increments than spherical RGP lenses. Conclusions: The results revealed that the difference in tear volume between aspherical RGP lens and cornea was less than spherical RGP lens, and the difference in tear volume varied according to corneal shape and astigmatism. In addition, the method of measuring relative tear volume between RGP lens and cornea that was established in the present study can be used to evaluate tear volume between contact lens and cornea.

• Toxicological Research
• /
• v.21 no.2
• /
• pp.141-150
• /
• 2005

1,3-Dichloro-2-propanol (1,3-DCP) is known as chloride chemicals and causes severe hepatotoxic agent. The Ito cells and Kupffer's cells of the liver in the 5 old F344 Rats were exposed to 1,3-DCP gas chamber for 6 hours/ a day, 5 days/ a week, and 13 weeks, in the 0, 5, 20, 80 ppm, respectively. After then the body weights, liver weights, and relative liver weight to body weight were measured, and the hepatic tissues were prepared by the routine and Immunostain method, and observed by the LM, and EM. In the results, there were severe body weight decrease (p<0.05) in the 80 ppm of the male and female rats. The relative liver weights to the body weight were increased relate with exposed 1,3-DCP concentration (P<0.001). Inflammatory cells, infiltration was observed at the perivascular area in the 20 ppm exposed group, and bilirubin pigment infiltration, bile duct hyperplasia, inflammation hepatocytic necrosis, fibrosis were observed in the 80 ppm exposure group. In the 80 ppm exposure group, disarrangement of the endothelial cells, erythrocytes and hepatic cell fragment in the Disse space and numerous migration macrophages were observed in the necrotic area by EM observation. In the immunostained hepatic tissues positive stained ED1 cells were extremely increased (P<0.05) in central vein area, but ED2 was weakly positive immunostained in the 80 ppm exposed group. Immunostained desmin was observed in the Ito cell. It was no difference in the low and medium exposed group but it was typical increase in the necrotic area. In conclusion, These results suggest that NOAEL of 1,3-DCP may be 5 ppm in rats and the Immunostained of desmin, ED1 and ED2 positive cells activated in the inflammatory liver were related to the exposure volume and density. The increase of the Ito cells were related to the severe phagocytosis of the Kupffer's cells.

• Journal of Yeungnam Medical Science
• /
• v.33 no.2
• /
• pp.90-97
• /
• 2016

Background: We have previously found that intra-peritoneal lidocaine instillation before pneumoperitoneum attenuates pneumoperitoneum-induced hypertension. Whether this procedure alters patient's hemodynamic status during operation should be determined for clinical application. This study elucidated the possible mechanism of the attenuation of the pneumoperitoneum-induced hypertension by intra-peritoneal lidocaine before pneumoperitoneum. Methods: Thirty-four patients underwent laparoscopic cholecystectomy (LC) were randomly allocated into two groups. After induction of general anesthesia, 200 mL of 0.2% lidocaine (lidocaine group, n=17), or normal saline (control group, n=17) were sub-diaphragmatically instilled 10 minutes before pneumoperitoneum. The changes in systolic blood pressure, heart rate, central venous pressure, stroke volume, cardiac output, and systemic vascular resistance were compared between the groups. The number of analgesics used during post-operative 24 h was compared. Results: Systolic blood pressure was elevated during pneumoperitoneum in both groups (p<0.01), but the degree of elevation was significantly reduced in the lidocaine group than in the control (p<0.01). However, stroke volume and cardiac output were decreased and systemic vascular resistance was increased after induction of pneumoperitoneum (p<0.05) without statistical difference between two groups. The number of analgesics used was significantly reduced in the lidocaine group (p<0.01). Conclusion: These data suggest that intra-peritoneal lidocaine before pneumoperitoneum does not alter patient's hemodynamics, and attenuation of pneumoperitoneum-induced hypertension may be the consequence of reduced intra-abdominal pain rather than the decrease of cardiac output during pneumoperitoneum. Therefore, intra-peritoneal lidocaine instillation before pneumoperitoneum is a useful method to manage an intraoperative pneumoperitoneum-induced hypertension and to control postoperative pain without severe detrimental hemodynamic effects.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.12a
• /
• pp.4-15
• /
• 2005

Methylmercury (MeHg) is an environmental pollutant with neurotoxic effects on the central nervous system. The major exposure route of MeHg to humans is via consumption of fish and shellfish which accumulate the chemical through the food web in an aquatic environment. Hair mercury level is an excellent marker for MeHg exposure. We have been conducting a survey on hair mercury contents among general populations from 14 districts to estimate the current Japanese MeHg exposure level. Total mercury levels of all hair samples collected (12923 in total) were analyzed by the oxygen combustion-gold amalgamation method using an atomic absorption mercury detector. Multiple regression analysis revealed that mercury levels were significantly correlated with several covariates, such as sex, age, the amount of daily intake of total fish/shellfish, a preference for certain fish such as tuna or bonito, and artificial waving. The geometric means for the population without artificial waving were 2.47 and 1.65 ${\mu}g/g$ for males (n = 5623) and females (n = 3470), respectively. Hair mercury levels varied with age, and the variations were more significant in males. Since the difference between sexes was not evident at younger ages, some hormonal control might also be involved in the mercury uptake by human hair. The average mercury levels in our hair samples varied among the sampling districts. Tuna is a major carnivorous fish with high mercury accumulations that is often consumed in Japan. The amount of fish consumption and the preference rate far tuna would appear to be responsible far the regional variation in hair mercury levels in Japan. Recently, a provisional tolerable weekly intake (PTWI) of MeHg was revised by 61st JECFA to 1.6 ${\mu}g/kg/week$, which was about half that of the Japanese standard, and corresponded to a hair level of 2.2 ppm. The distribution of hair mercury levels in Japanese populations in the present study indicated that 25% of the Japanese females of child-bearing age were estimated to be exposed to MeHg over the PTWI level. This would reflect the high Japanese consumption of marine products. However, not only mercury contamination, but also the nutritional benefit may have to be considered when discussing the risk involved in the current level of fish and shellfish consumption in Japan.

• Journal of the Korea Concrete Institute
• /
• v.20 no.5
• /
• pp.543-548
• /
• 2008

Solid hydrated by hydro-thermal synthesis reaction is cured two times, the first curing is the steam curing at atmospheric pressure and the second one is a high-pressure steam curing, that is autoclaving. Steam curing is to acquire the proper strength for the resistance of treatment in the first curing process, it was not evaluated properly so far. Because of ignorance about curing, some engineers even think that the dry curing is better than the steam curing. The relation between compressive strength of solid hydrated by hydrothermal synthesis reaction and curing condition are presented in this paper. In order to investigate the effect of curing on the strength properties of specimen, the hydration behavior of solid hydrated by hydro-thermal synthesis reaction has been studied over curing condition using XRD, DT-TGA and porosimeter, SEM analysis technique. The results show that the specimens which are cured with blended method of dry and steam curing appear to have better strength properties than that of dry curing and steam curing. Also, there are significant difference of hydration behavior among curing condition in the solid hydrated by hydro-thermal synthesis reaction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.286-291
• /
• 2014

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.