• Journal of Preventive Medicine and Public Health
• /
• v.54 no.4
• /
• pp.245-250
• /
• 2021

Objectives: Jeju Province in Korea reported 627 coronavirus disease 2019 (COVID-19) cases between January 20, 2020, and March 31, 2021. This study analyzed the sources of infection among confirmed cases in Jeju Province, a self-governed island. Methods: The sources of infection were broadly categorized as follows: (1) infections from overseas (confirmed patients who reported travel overseas or contact with overseas travelers); (2) infections from outside Jeju Province (confirmed patients who had visited other provinces or had contact with individuals who had traveled to other provinces in Korea); and (3) unknown sources of infection (confirmed patients who were infected following contact with an infected person whose source of infection was unknown). The chi-square test was used to analyze the differences in the distributions of related variables for each source of infection. Results: Of the 627 confirmed cases, 38 (6.1%) were infections from overseas sources, 199 (31.7%) were from outside of Jeju Province, and 390 (62.2%) were from unknown sources. Jeju Province had no cases with an unknown source of infection during the first and second waves of the nationwide outbreak. Conclusions: Infections from overseas sources could be blocked from spreading to local communities in Jeju Province by conducting screening at the airport, along with the preemptive suspension of visa-free entry. In addition, considering the scale of the nationwide outbreak, measures must be established to delay outbreaks from unknown sources of infection caused by sources outside Jeju Province.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.1
• /
• pp.66-70
• /
• 2019

Objectives: In the Republic of Korea (ROK), the notified incidence of tuberculosis in foreign-born individuals (NITFBI) has increased recently, as has the rate of multidrug-resistant (MDR) and rifampicin-resistant (RR) tuberculosis in foreigners staying in the ROK. As Jeju Province in ROK has a no-visa entry policy, control programs for NITFBI should be consolidated. The aim was to evaluate the status of NITFBI, with a focus on the distribution of MDR/RR tuberculosis by nationality. Methods: Data on tuberculosis incidence in individuals born in Jeju Province and in foreign-born individuals were extracted from the Korean Statistical Information Service of Statistics Korea, and the Infectious Disease Surveillance Web Statistics of the Korea Centers for Disease Control and Prevention, respectively. Results: Among all notified incident cases of tuberculosis, the proportion of NITFBI increased from 1.46% in 2011 to 6.84% in 2017. China- and Vietnam-born individuals accounted for the greatest proportion of the 95 cases of NITFBI. Seven cases of MDR/RR tuberculosis were found, all involving patients born in China. Conclusions: In Jeju Province, ROK, NITFBI might become more common in the near future. Countermeasures for controlling active tuberculosis in immigrants born in high-risk nations for tuberculosis should be prepared in Jeju Province, since it is a popular tourist destination.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.115-124
• /
• 2018

Thermal protection materials (TPMs) are very crucial for the survival of any re-entry space vehicles. One of the systems used for rigorous validation of TPMs is an enhanced Huel type segmented arc-heated plasma wind tunnel. A 0.4 MW class arc-heated plasma wind tunnel has been constructed at Chonbuk National University which is capable of producing high enthalpy supersonic flow. In this paper we have studied the characteristics of plasma flow according to power and mass flow parameters.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.343-346
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the marring concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile is determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.1
• /
• pp.63-73
• /
• 2014

For robust stability analysis of parameters uncertainty missiles, the traditional frequency domain method can only analyze each respective channel at several interval points within uncertain parameter space. Discontinuous calculation and couplings between channels will lead to inaccurate analysis results. A method based on the ${\nu}$-gap metric is proposed, which is able to comprehensively evaluate the robust stability of missiles with uncertain parameters; and then a genetic-simulated annealing hybrid optimization algorithm, which has global and local searching ability, is used to search for a parameters combination that leads to the worst stability within the space of uncertain parameters. Finally, the proposed method is used to analyze the robust stability of a re-entry missile with uncertain parameters; the results verify the feasibility and accuracy of the method.

• Journal of Aerospace System Engineering
• /
• v.10 no.2
• /
• pp.34-40
• /
• 2016

A satellite is exposed to various impact environment until orbit entry. It is particularly undergoing the biggest impact by pyro shock, which is generated when the launch vehicle stages are separated or the satellite is separated from the launch vehicle. In this paper, due to the fact that the pyro shock is prerequisite for performing the test and verification on the ground, we developed an air-gun type shock tester for NEXTSat-1 shock test at the KAIST SaTReC along with the development of program introduced by LabVIEW software. The program operated in shock tester is consist of data measurement and analysis with the convenient implementation of user interface and its easy modification of the code.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.208-217
• /
• 2003

In order to construct the extrusion die surface of T -shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the T-shaped section and T-shaped section with rounded corners.

• Asian Journal for Public Opinion Research
• /
• v.5 no.1
• /
• pp.15-40
• /
• 2017

This paper addresses the zero-sum of soft power against the backdrop of the rise of China and the relative "decline" of America. It attempts to find out that whether the "decline" of America's soft power is caused by the rise of China's soft power, and whether China's rise could guarantee with certainty the growth of soft power. In light of the particularity of South Korea, that is, its economy relies on China and its security relies on the US, this paper chooses South Korea as the entry point for the study. Based on the Pew data from a South Korean opinion poll, this paper conducts bivariate correlation and binary logistic regression respectively, to explore the existence of zero-sum "competitions" between China's and America's soft power.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1081-1088
• /
• 2000

In this paper, a compliance control strategy for robot manipulators that employs a self-adjusting stiffiness function is proposed. Based on the contact force, each entry of the diagonal stiffness matrix corresponding to a task coordinate in the operational space is adaptively adjusted during contact along the corresponding axis. The proposed method can be used for both the unconstrained and constrained motions without any switching mechanism which often causes undesirable instability and/or vibrational motion of the end-effector. The experimental results involving a two-link direct drive manipulator interacting with an unknown environment demonstrates the effectiveness of the proposed method.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.348-357
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. A center point fur area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.