• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.45-50
• /
• 1998

The low grade domestic kaoline, such as pink-C and white-D, was converted to metakaoline, which has pozzolanic reactivity by heat treatment in the temperature range of $600^{\circ}C$ to 100$0^{\circ}C$ for preparing the spacer. The spacer was used for supporting the reinforced steel rod during construction to improve the safety of architecture. Pink-C and white-D were completely dehydroxylated when burnt at 80$0^{\circ}C$ for 1 hour and converted to metakaoline. The compressive strengths of specimens added calcined pink-C were lower than those of press molding mortar products inspite of calcining conditions. When white-D with calcined 80$0^{\circ}C$ and 100$0^{\circ}C$ for 1 hour was mixed 30% in the weight ratio of cement, the specimens cured 28 days had 338 $kg/cm^2$ and 347 $kg/cm^2$ of compressive strengths, respectively.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.77-81
• /
• 1980

The author has studied comparatively the sealing quality of conventional Z.O.E. cement, Kerr sealer and Nogenol sealer by means of penetration of 2% methylene blue solution through the root apex of human teeth in 72 cases as time elapsed. The results were as follows; 1. All the specimens, whose dye immersion time is two days, showed dye penetration of low degree unrelated to the kinds of root canal sealer. 2. Kerr sealer group, like conventional Z.O.E. group, showed dye penetration of high degree related to increased time of immersion in the dye. 3. In Nogenol group, there was slight increase in penetration related to increased time of immersion in the dye. 4. Kerr sealer group showed comparatively lower grade of dye penetration than conventional Z.O.E. and higher than Nogenel sealer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.2
• /
• pp.155-160
• /
• 1999

Recently, the study on mix design of lightweight concrete using the polystyrene foam balls is put into practice from the viewpoint to grade up the quality of concrete and recyclable usage of industrial by products. Polystyrene aggregate concrete, PAC, can be used as structural concrete in low strength application. For instance, PAC could be used in the middle part of sandwich panel where stresses are generally low and in the case of grid-type reinforcement where it does not need high bond strength but little compressive strength to resist the pressure of transverse reinforcement. From this point of view, the authors discussed the influence of fluidity and compressive strength of concrete by the difference of the volume percentage of polystyrene foam balls and water cement ratio.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.276-285
• /
• 2020

In this study, accelerated chloride diffusion tests were performed on OPC(Ordinary Portland Cement) and FA(Fly Ash) concrete considering three levels o f W/B(Water to Binder) ratio o n 1,095 curing days. The accelerated chloride diffusion coefficient and the passed charge were evaluated in accordance with Tang's method and ASTM C 1202, and the resistance performance to chloride attack improved over time. FA concrete showed excellent resistance performance against chloride penetration with help of pozzolanic reaction. As the result of the passed charge, FA concrete showed durability improvement, "low" grade to "very low" grade, but OPC concrete changed "moderate" grade to "low" grade at 1,095 curing days. After assuming the design variables used for durability design as normal distribution functions, the service life of each case was evaluated by the probabilistic analysis method based on MCS(Monte Carlo Simulation). In FA concrete, the increase of probability of durability failure was lower than that of OPC concrete with increasing time, because the time-dependent coefficient of FA concrete was up to 3.2 times higher than OPC concrete. In addition, the service life by probabilistic analysis was evaluated lower than the service life by deterministic analysis, since the target probability of durability failure was set to 10%. It is considered that more economical durability design will be possible if the mo re suitable target probability of durability failure is set for various structures through researches on actual conditions and indoor tests under various circumstances.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.399-407
• /
• 2020

The aim of the research is to provide the boundary conditions for segregation of normal strength grade and high fluidity concrete mixture (so called mid-fluidity concrete) with rheology parameters. Since the normal strength grade concrete mixture has a relatively high water-to-cement ratio and no SCMs, it is easy to be segregated when superplasticizer is added. Hence, to achieve the mid-fluidity concrete of normal strength grade and high fluidity, preventing segregation of the mixture is inevitable. In this research, using two superplasticizers with different solid concentrations, the flow behaviors and rheological behaviors were assessed by increasing fluidity until the segregation happened. According to the experiment in this research, an unusual behavior in rheology parameters was observed when the concrete mixture started to be segregated. From this results and report, it is expected to contribute on the definition of segregation with rheological test methods.

• The Journal of the Korean bone and joint tumor society
• /
• v.12 no.1
• /
• pp.71-77
• /
• 2006

Chondrosarcoma is one of the most common types of primary bone sarcoma. With the exception of the mesenchymal subtype, chondrosarcomas are usually low-grade lesions and rarely show multicentricity or distant metastasis. Only rare cases of multicentric chondrosarcomas have been reported in association with Ollier's disease and Maffucci's syndrome. To our knowledge, no report has been issued of a synchronous multicentric chondrosarcoma occurrence across a joint. We experienced a 30-year-old man with a synchronous monomelic juxta-articular multicentric chondrosarcoma across a shoulder joint in the absence of pulmonary and visceral metastases. He was treated by curettage and cement filling with allograft in the acromion and wedge resection with cement filling in the proximal humerus. At the 18-month follow-up, there was no evidence of recurrence, and the patient had full range of motion without pain.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.5
• /
• pp.291-294
• /
• 2007

Objective : The purpose of this retrospective clinical study was to describe a treatment for osteoporotic burst fracture in the setting of severe fractures involving fragmentation of the posterior wall and neural compromise with symptoms of cord compression. Methods : Indication for microscopic decompression and open kyphoplasty were intractable pain at the level of a known osteoporotic burst fractures involving neural compression or posterior wall fragmentation. A total of 18 patients [mean age, 74.6 years] with osteoporotic thoracolumbar burst fractures [3 males, 15 females] were included in this study. In all cases, microscopic decompressive laminectomy was followed by open kyphoplasty. Clinical outcome using VAS score and modified MacNab's grade was assessed on last clinical follow up [mean 6.7 months]. Radiological analysis of sagittal alignment was assessed preoperatively, immediately postoperatively, and at final follow up. Results : One level augmentation and 1.8 level microscopic decompression were performed. Mean blood loss was less than 100 ml and there were no major complications. The mean pain score before operation and at final follow up was 7.2 and 1.9, respectively. Fourteen of 18 patients were graded as excellent and good according to the modified MacNab's criteria. Overall, 6.0 degrees of sagittal correction was obtained at final follow-up. Conclusion : The combined thoracolumbar microscopic decompression and open kyphoplasty for severe osteoporotic fractures involving fragmentation of posterior wall and neural compromise provide direct visualization of neural elements, allowing safe cement augmentation of burst fractures. Decompressive surgery is possible and risk of epidural cement leakage is controlled intraoperatively.

• The Journal of the Korean bone and joint tumor society
• /
• v.3 no.2
• /
• pp.112-118
• /
• 1997

Multicentric chondrosarcoma other than the mesenchymal subtype is rare separate entity. We experienced a case with nonmonomelic synchronous multicentric chondrosarcoma without any preexisting lesions of Oilier's disease or Maffucci's syndrome. To our knowledge, there was no report of synchronous nonmonomelic multicentric chondrosarcoma. A thirty-three year old man had right distal thigh pain of one and half year. Bone scan showed hot lesions on medial condyle of right femur and shaft of left femur. Plain X-ray showed osteolytic lesion on right femur and slight cortical thickening and calcific lesion was observed on left femoral shaft. Curettage and bone cement filling was done on both lesions. The pathology reports were grade I chondrosarcoma on both side of femur. At one month from operation, pathologic fracture of left femur occurred on bone cement-host bone junction. Conservative treatment and radiotherapy of 60Gy was done. At 8 months from operation, nonunion was evident. Segmental resection of left femur with contralateral fibula graft and second look operation on right condyle lesion were done. At 6 months from revision, fracture occurred at host-graft bone junction. We removed previous hardware and applied long DCP and massive autogenous bone graft. Afterwards, the patient looks good and union was progressing. But at 4 years from last operation, hypertrophic nonunion occurred. Another revision was done with condylar plate and bone graft and now he is well without any sign of local recurrence or metastasis.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.3
• /
• pp.211-217
• /
• 2014

Objective : In Korea, early vertebroplasty (EVP) or delayed vertebroplasty (DVP, which is performed at least 2 weeks after diagnosis) were performed for the treatment of acute osteoporotic compression fracture (OCF) of the spine. The present study compared the outcomes of two surgical strategies for the treatment of single-level acute OCF in the thoracolumbar junction (T12-L2). Methods : From 2004 to 2010, 23 patients were allocated to the EVP group (EVPG) and 27 patients to the DVP group (DVPG). Overall mean age was $68.3{\pm}7.9$ and minimum follow-up period was 1.0 year. Retrospective study of clinical and radiological results was conducted. Results : No significant differences in baseline characteristics were observed between the two groups. As expected, mean duration from onset to vertebroplasty and mean duration of hospital stay were significantly longer in the DVPG ($17.1{\pm}2.1$ and $17.5{\pm}4.2$) than in the EVPG ($3.8{\pm}3.3$ and $10.8{\pm}5.1$, p=0.001). Final clinical outcome including visual analogue scale (VAS), Oswestry Disability Index, and Odom's criteria did not differ between the two groups. However, immediate improvement of the VAS after vertebroplasty was greater in the EVPG ($5.1{\pm}1.3$) than in the DVPG ($4.0{\pm}1.0$, p=0.002). The proportion of cement leakage was lower in the EVPG (30.4%) than in the DVPG (59.3%, p=0.039). In addition, semiquantitative grade of cement interdigitation was significantly more favorable in the EVPG than in the DVPG (p=0.003). Final vertebral body collapse and segmental kyphosis did not differ significantly between the two groups. Conclusion : Our findings suggest that EVP achieves a better immediate surgical effect with more favorable cost-effectiveness.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.491-497
• /
• 2014

PURPOSE. This study evaluated the influence of abutment materials on the stability of the implant-abutment joint in internal conical connection type implant systems. MATERIALS AND METHODS. Internal conical connection type implants, cement-retained abutments, and tungsten carbide-coated abutment screws were used. The abutments were fabricated with commercially pure grade 3 titanium (group T3), commercially pure grade 4 titanium (group T4), or Ti-6Al-4V (group TA) (n=5, each). In order to assess the amount of settlement after abutment fixation, a 30-Ncm tightening torque was applied, then the change in length before and after tightening the abutment screw was measured, and the preload exerted was recorded. The compressive bending strength was measured under the ISO14801 conditions. In order to determine whether there were significant changes in settlement, preload, and compressive bending strength before and after abutment fixation depending on abutment materials, one-way ANOVA and Tukey's HSD post-hoc test was performed. RESULTS. Group TA exhibited the smallest mean change in the combined length of the implant and abutment before and after fixation, and no difference was observed between groups T3 and T4 (P>.05). Group TA exhibited the highest preload and compressive bending strength values, followed by T4, then T3 (P<.001). CONCLUSION. The abutment material can influence the stability of the interface in internal conical connection type implant systems. The strength of the abutment material was inversely correlated with settlement, and positively correlated with compressive bending strength. Preload was inversely proportional to the frictional coefficient of the abutment material.