• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1391-1396
• /
• 2013

The photocontrolled reduction of silver nitrate to silver (Ag) nanoparticles on honeycomb-patterned poly(N-vinylcarbazole) (PVK)-cellulose triacetate (CTA) composite thin films was studied. The composites were prepared via the oxidative polymerization of N-vinylcarbazole with ferric chloride using different CTA concentrations. A honeycomb-patterned film was fabricated by casting the composite solution under humid conditions. Ag particles with a homogeneous distribution were produced by the composite film in a moderate CTA concentration, whereas aggregated Ag was obtained from the pure PVK film.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.28-34
• /
• 2004

The polarizing film application exploits the unique physicochemical properties between PVA(Poly vinyl alcohol) film and CTA(Cellulose triacetate) film. However, hardly any research was aimed at improving the adhesion characteristics of the CTA film by radio frequency(RF) plasma treatment at argon(Ar) gaseous state. In this report, we deal with surface treatment technology for protective CTA film developed specifically for high adhesion applications. After Ar plasma, surface of the films is analyzed by atomic force microscopy(AFM), roughness parameter and peel strength. Furthermore, the wetting properties of the CTA film were studied by contact angle analysis. Results obtained for CTA films treated with a glow discharge showed that this technique is sensitive to newly created physical functions. The roughness and peel strength value increased with an increase in treatment time for initial treatment, but showed decreasing trend for continuous treatment time. The result of contact angle measurement refer that the hydrophilicity of surface was increased. AFM studies indicated that no considerable change of surface morphology occurred up to 3 minutes of treatment time, but a considerable uneven of surface structure resulted from treating time after 5 minutes.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.273-278
• /
• 2000

Cellulose tosylate(CT) was prepared by reaction of cellulose with p- toluenesulfonylchloride in DMAc/LiCl homogeneous system. In order to study a reversible photoisomerization of disperse red 1(DR-1) attached on natural polymer, cellulose tosylate containing DR-1(DR-1/CT adduct) was prepared at $110^{\circ}C$ in DMAc, and the changes of UV/Vis spectra of its solutions and thick film were investigated by alternate irradiation technique. Form the UV/Vis spectra of DR-1/CT adduct dissolved in cosolvents, such as DMAc, DMAc/THF, DMAc/benzene, and DMAc/chloroform and irradiated with 360 nm and 450 nm ligths, we found out changes of UV/Vis spectra were reversible in all solvents systems and we found out changes of UV/Vis spectra were reversible at thick film, also.

• 한국식품과학회지
• /
• 제28권1호
• /
• pp.1-7
• /
• 1996

Hydrocolloid film에 lipid 액을 입혀 제조한 film A와 hydrocolloid 용액에 beeswax의 함량과 용해 상태를 달리하여 제조한 film B와 C의 물리적 특성을 검토해 본 결과, 제조에 있어서는 film A보다 film B와 C의 제조가 용이하였다. 세가지 film의 두께는 0.03 mm 정도로 유의적인 차이를 나타내지 않았으며, 1-3%의 수분함량과 59-68%의 지방을 함유한 film으로 세 film 모두 백색을 나타내었다. 인장강도는 film A가 우수하였으며, 투습도에서는 lipid 액의 뚜렷한 효과로 감소하였으며 film A와 B는 유의적인 차이를 나타내지 않았다. 한편 냉동전후의 투습도에서 film A는 유의적인 차이를 나타내지 않았으나, film B와 C는 냉동 후의 투습도가 유의적으로 감소하였다. 산소투과도는 film A와 C가 유의적인 차이를 나타내지 않았다. 전자현미경으로 film의 표면특성을 관찰한 결과, film A는 지방구의 분포가 일정하였으나 B와 C는 지방구의 편재를 볼 수 있었으며 1년 저장 후 film A는 bilayer층의 delamination을 나타내는 것으로 보아 전반적인 물리적 특성은 film A가 우수하나 장기저장에 있어서는 보다 제조법이 용이한 film B와 C를 선택하는 것이 바람직할 것으로 보이며, film B와 C의 균일하지 못한 표면 형상을 개선하는 방법과 투습도 및 산소투과도를 감소시키는 것이 앞으로 개선할 과제로 여겨진다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.15-16
• /
• 2012

• 한국수산과학회지
• /
• 제41권4호
• /
• pp.237-242
• /
• 2008

The tunic of Styela clava(SCT) consists of a proteoglycan network. Regenerated cellulose films were prepared by solution casting and coagulation of SCT in N-methylmorpholine-N-oxide(NMMO)/$H_2O$(87/13 wt%). The crystalline structure of powdered SCT was primarily that of cellulose I. The crystalline structure of SCT films exhibited a cellulose II structure, similar to that of viscose rayon. Physical characterization of SCT films and fibers revealed an intrinsic viscosity($\eta$) of 6.35 dL/g, average molecular weight($M_w$) of 423,000 g/M, and fiber density of 1.50 $g/cm^3$ with a moisture regain and water absorption of 10.20% and 365%, respectively. The results were similar to those of cellulose films regenerated from wood pulp. Films prepared with 6 wt% SCT exhibited strong tensile strength, high water absorption, and a greater degree of elongation. Scanning electron micrographs(SEM) of film cross-sections showed a layered, sponge-like structure.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.341-346
• /
• 2008

Cellulose nanofibers from microfibril cellulose (MFC) was prepared by hydrobromic acid (HBr) treatment at different concentrations. Polyvinyl alcohol (PVA) composite films at various loading level of nanofibers were manufactured by a film casting method. The analysis of degree of polymerization (DP), crystallinity ($X_c$) and molecular weight ($M_w$) of cellulose after acid treatment was conducted. The mechanical and thermal properties of the cellulose nanofibers reinforced PVA films were characterized using tensile tests and thermogravimetric analysis (TGA). The DP and $M_w$ of MFC by HBr hydrolysis considerably decreased, but $X_c$ showed no significant change. After acid hydrolysis, the diameter of cellulose nanofibers was in the range of 100 to 200 nm. The thermal stability of the films was steadily improved with the increase of nanofiber loading. There was a significant increase in the tensile strength of PVA composite films with the increase in MFC loading. Finally, 5 wt.% nanofiber loading exhibited the highest tensile strength and thermal stability of PVA composite films.

• 한국포장학회지
• /
• 제16권1호
• /
• pp.19-25
• /
• 2010

It is becoming increasingly important to utilize alternative raw materials for plastic industries other than petrochemical-based plastics. Cellulose derivatives were the bases of the original synthetic plastics. Cellulose and its derivatives, especially the widely used cellulose acetate (CA), constitute one of the main classes of raw materials for production on artificial fibers, films, plastics etc. CA is one of the well known polymers produced from naturally available plant substance. Many researches have focused on the isolation of cellulose from the plant cells to use them as cellulose derivatives and composite materials. Chemical and mechanical treatments provide changes on the molecular structures influencing the fundamental properties of these naturally abundant polymer. The aim of this review article is to review biodegradation, synthesis, formation, and utilization of cellulose esters, especially di-acetate, used in packaging related researches.

• Journal of Radiation Protection and Research
• /
• 제9권2호
• /
• pp.61-66
• /
• 1984

Cellulose nitrate 의 ${\alpha}$입자비적특성(粒子飛跡特性), 특(特)히 화학부식조건(化學腐蝕條件)에 따른 ${\alpha}$입자(粒子)의 비적직경(飛跡直徑)을 중심(中心)으로 연구(硏究)하였다. Cellulose nitrate의 KOH 용액부식(溶液腐蝕)때에는 동일(同一)한 부식조건하에(腐蝕條件下)에서 NaOH 경우보다 ${\alpha}$비적직경(飛跡直徑)이 약(約) 3배(培) 크게 나타났다. 그밖에 부식시간(腐蝕時間) 및 ${\alpha}$입자(粒子)의 에너지에 따른 비적직경(飛跡直徑)의 데이타를 얻었고, ${\alpha}$입자(粒子)의 조사조건(照射條件)이 같을 때 흘루언스율(率)(fluence rate)이 부식시간(腐蝕時間)에 무관(無關)함을 알았다.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.506-514
• /
• 2020

The current study stresses on the reuse of waste lignocellulose biomass (rice husk and sugarcane bagasse) for the synthesis of carboxymethyl cellulose (CMC) and further conversion of this CMC into a biodegradable film. Addition of commercial starch was done to form biodegradable film due to its capacity to form a continuous matrix. Plasticizers such as Glycerol and citric acid were used to provide flexibility and strength to the film. Biopolymer film obtained from sugarcane bagasse CMC showed maximum tensile strength and elongation in comparison to the film synthesized from commercial CMC and CMC obtained from rice husk. It has been observed that an increase in sodium glycolate/NaCl content in CMC imposed an adverse effect on tensile strength. Opacity, moisture content, and solubility of the film increased with a rise in the degree of substitution of CMC. Therefore, CMC obtained from sugarcane bagasse was better candidate in preparing biopolymer/biocomposite film.