• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2003

For the development of low temperature anode-supported planar solid oxide fuel cell, the planar anode supports with the thickness of 0.8 to 1 mm and the area of 25, 100 and $150\;cm^2$ were fabricated by the tape casting method. The strength, porosity, gas permeability and electrical conductivity of the planar anode support were measured. The porosity of anode supports sintered at $1400^{\circ}C$ and then reduced in$H_2$ atmosphere was increased from $45.8\%\;to\;53.9\%$. The electrical conductivity of the anode support was $900 S/cm\;at\; 850^{\circ}C$ and its gas permeability was 6l/min at 1 atm in air atmosphere. The electrolyte layer and cathode layer were fabricated by slurry dip coating method and then had examined the thickness of $10{\mu}m$ and the gas permeability of 2.5 ml/min at 3 atm in air atmosphere. As preliminary experiment, cathode multi-layered structure consists of LSM-YSZ/LSM/LSCF. At single cell test using the electrolyte layer with thickness of 20 to $30{\mu}m$, we achieved $300\;mA/cm^2$ and 0.6V at $750^{\circ}C$

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.2
• /
• pp.66-73
• /
• 2009

Tumor angiogenesis is a process leading to formation of blood vessels within tumors and is crucial for maintaining a supply of oxygen and nutrients to support tumor growth and metastasis. Vascular endothelial growth factor(VEGF) plays a key role in tumor angiogenesis including induction of endothelial cell proliferation, migration, survival and capillary tube formation. VEGF binds to two distinct receptors on endothelial cells. VEGFR-2 is considered to be the dominant signaling receptor for endothelial cell permeability, proliferation, and differentiation. Bevacizumab(Avastin, Genetech, USA) is a monoclonal antibody against vascular endothelial growth factor. It is used in the treatment of cancer, where it inhibits tumor growth by blocking the formation of new blood vessels. The goal of this study is to identify the anti-tumor effect of Bevacizumab(Avastin) for oral squamous cell carcinoma cell lines. Human squamous cell carcinoma cell line(HN4) was used in this study. We examined the sensitivity of HN4 cell line to Bevacizumab(Avastin) by using in vitro proliferation assays. The results were as follows. 1. In the result of MTT assay according to concentration of Bevacizumab(Avastin), antiproliferative effect for oral squamous cell carcinoma cell lines was observed. 2. The growth curve of cell line showed the gradual growth inhibition of oral squamous cell carcinoma cell lines after exposure of Bevacizumab(Avastin). 3. In the apoptotic index, groups inoculated Bevacizumab(Avastin) were higher than control groups. 4. In condition of serum starvation, VEGFR-2 did not show any detectable autophosphorylation, whereas the addition of VEGF activated the receptor. Suppression of phosphorylated VEGFR-2 and phosphorylated MAPK was observed following treatment with Bevacizumab(Avastin) in a dose-dependent manner. 5. In TEM view, dispersed nuclear membrane, scattered many cytoplasmic vacuoles and localized chromosomal margination after Bevacizumab(Avastin) treatment were observed. These findings suggest that Bevacizumab(Avastin) has the potential to inhibit MAPK pathway in proliferation of oral squamous cell carcinoma cell lines via inhibition of VEGF-dependent tumor growth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.402-405
• /
• 2012

In this paper, we proposed a novel metamaterial unit cell utilizing an interdigital capacitor(IDC) with non-bianisotropic property. Due to the induced magnetic resonance of an IDC unit cell, exotic effective constitutive parameters can be realized like a split ring resonator(SRR). Furthermore, the proposed unit cell is electrically smaller than a conventional SRR unit cell. The effective parameters retrieved from the transmission responses of waveguide measurement method and simulated results show good agreement.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.76.1-76.1
• /
• 2010

Recently, many efforts to solve the durability problem of PEM fuel cell are carried on constantly. However, despite this attention, durability researches of gas diffusion layer (GDL) are not much reported yet. Generally, GDL of PEM fuel cell experiences three external attacks, which are dissolution of water, erosion of gas flow, corrosion of electric potential. In this study, among these degradation factors, carbon corrosion of electric potential was focused and investigated with accelerated carbon corrosion test. Through the test, it is confirmed that carbon corrosion occurred at GDL, and corroded GDL decreased a performance of operating fuel cell. The property changes of GDL were measured with various methods such as air permeability meter, pore distribution analyzer, thermo gravimetric analyzer, and tensile stress test to discover the effects of carbon corrosion. Carbon corrosion caused not only loss of weight and thickness, but also degradation of mechanical strength of GDL. In addition, to analysis the reason of GDL property changes, a surface and a cross section of GDL were observed with scanning electron microscope. After 100 hours test, the GDL showed serious damage in center of layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.295-298
• /
• 2009

Oxygen ionic conductors of CeScSZ electrolyte in SOFC unit cell are applied to anode and cathode as well as electrolyte to have the triple-phase-boundaries of electrochemical reaction, and it is required to decrease the sintering temperature of anode-supported electrolyte by the nanoscale of CeScSZ electrolyte powder. In this report, nanoscale CeScSZ electrolyte powder was synthesized by chemical synthesis method. The particle size, surface area and morphology of the powder were observed by SEM and BET. Thin film electrolyte of under $10{\mu}m$ was fabricated by tape casting using the synthesized CeScSZ electrolyte powder, and ionic conductivity and gas permeability of electrolyte film were evaluated. Finally the SOFC unit cell was fabricated using the anode-supported electrolyte prepared by a tape casting method and co-sintering, in which the active layer, measuring $20{\mu}m$, was introduced in the anode layer to provide a more efficient reaction. Electrochemical evaluations of the SOFC unit cell, including measurements such as power density and impedance, were performed and analyzed.

• Journal of Applied Biological Chemistry
• /
• v.56 no.3
• /
• pp.171-177
• /
• 2013

Efficient extraction of total proteins from soil microorganisms is tedious because of small quantity. In this regard, an improved method for extraction of whole cell proteins is developed from soil microorganisms, Saccharomyces cerevisiae and Pichia pastoris. of which the cell wall are very strong. Pretreatment with NH4OH prior to the final extraction using NaOH/SDS was tried under the basis that ammonium ion was possible to enhance the permeability and/or to weaken the yeast cell walls. The pre-treatment of yeast cells with NH4OH drastically enhanced the protein extraction when it was compared with control (without NH4OH pre-treatment). At the pre-treatment of 0.04 N NH4OH at pH 9.0, about 3 fold of proteins was obtained from p. pastoris. Ammonium hydroxide appears to penetrate into the yeast cell walls more readily at basic pH. The effect of NH4OH pretreatment was pH dependent. The methods developed in this experiment might be applicable for an effective extraction of yeast proteins for the purpose of biochemical studies, especially proteomic analysis.

• BMB Reports
• /
• v.40 no.6
• /
• pp.1090-1094
• /
• 2007

Melittin (ME), a linear 26-residue non-cell-selective antimicrobial peptide, displays strong lytic activity against bacterial and human red blood cells. To design ME analogue with improved cell selectivity, we synthesized a melittin diastereomer (ME-D) with D-amino acid in the leucine zipper sequence (Leu-6, Lue-13 and Ile-20). Compared to ME, ME-D exhibited the same or 2-fold higher antibacterial activity but 8-fold less hemolytic activity. Circular dichroism analysis revealed that ME-D has much less $\alpha$-helical content in $\alpha$-helical content in the presence of zwitterionic EYPC/cholesterol (10 : 1, w/w) liposomes compared to negatively charged EYPE/EYPG (7 : 3, w/w) liposomes. The blue shift of the fluorescence emission maximum of ME-D in zwitterionic EYPC/cholesterol (10 : 1, w/w) liposomes was much smaller than in negatively charged EYPE/EYPG (7 : 3, w/w) liposomes. These results suggested that the improvement in therapeutic index/cell selectivity of ME-D is correlated with its less permeability to zwitterionic membranes.

• Journal of Life Science
• /
• v.7 no.2
• /
• pp.79-87
• /
• 1997

To determine the cause of Vibrio septicemia by understanding the characteristics endotoxin from Vibrio vulnificus, lethal dose, heat resistance and vascular permeability enhancing activity were svaluated using vegestative cell and cell homogenate and the result is as follows: 1. Vibrio vulnificus CDC B3547 of patient origin did not exihibit any significant difference in toxicity compared to Vibrio vulnificus B57 of enviroment origin. 2. Strong toxicity was observed when viable cell count of Vibrio vulnificus CDC B3547 was more than 10$^{7}$/ml. 3. Toxicity of cell homogenate was completely inactivited upon geating at 80$^{\circ}$C for 20min. 4. Cell homogenate did not show hemolyic activity but was acknowleged to have cytotoxicity. 5. Major lethal toxin against mouse was existed in Vibrio vulnificus CDC B3547; however, separation of LPS and LPS-protein complex was not successful using the current technique.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.12
• /
• pp.1827-1834
• /
• 2020

Candida albicans is a major fungal pathogen in humans. In our previous study, we reported that an ethanol extract from Aucklandia lappa weakens C. albicans cell wall by inhibiting synthesis or assembly of both (1,3)-β-D-glucan polymers and chitin. In the current study, we found that the extract is involved in permeabilization of C. albicans cell membranes. While uptake of ethidium bromide (EtBr) was 3.0% in control cells, it increased to 7.4% for 30 min in the presence of the A. lappa ethanol extract at its minimal inhibitory concentration (MIC), 0.78 mg/ml, compared to uptake by heat-killed cells. Besides, leakage of DNA and proteins was observed in A. lappa-treated C. albicans cells. The increased uptake of EtBr and leakage of cellular materials suggest that A. lappa ethanol extract induced functional changes in C. albicans cell membranes. Incorporation of diphenylhexatriene (DPH) into membranes in the A. lappa-treated C. albicans cells at its MIC decreased to 84.8%, after 60 min of incubation, compared with that of the controls, indicate that there was a change in membrane dynamics. Moreover, the anticandidal effect of the A. lappa ethanol extract was enhanced at a growth temperature of 40℃ compared to that at 35℃. The above data suggest that the antifungal activity of the A. lappa ethanol extract against C. albicans is associated with synergistic action of membrane permeabilization due to changes in membrane dynamics and cell wall damage caused by reduced formation of (1,3)-β-D-glucan and chitin.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.5
• /
• pp.465-477
• /
• 2023

In proton exchange membrane fuel cell (PEMFC), proper thermal management of the stack and moisture generation by electrochemical reactions significantly affect fuel cell performance. In this study, the PEMFC dynamic characteristic model was developed through Simcenter AMESim, a development program. In addition, the developed model aims to understand the thermal resin balance of the stack and performance characteristics for input loads. The developed model applies the thermal management model of the stack and the moisture content and permeability model to simulate voltage loss and stack thermal behavior precisely. This study extended the C based AMESet (adaptive modeling environment submodeling tool) to simulate electrochemical reactions inside the stack. Fuel cell model of AMESet was liberalized with AMESim and then integrated with the balance of plant (BOP) model and analyzed. And It is intended to be used in component design through BOP analysis. The resistance loss of the stack and thermal behavior characteristics were predicted, and the impact of stack performance and efficiency was evaluated.