• 생태와환경
• /
• 제39권2호통권116호
• /
• pp.271-283
• /
• 2006

섬 지역의 초기 담수과정에 있는 상수원 저수지 (절곡저수지)에서 수색 악화와 여과지 폐색의 원인을 분석하기 위해 2005년 8월에 식물플랑크톤을 포함한 다각적인 수환경 조사를 수행하였다. 저수지의 형태는 단순하였고, 평균 수심은 5.5 m로서, 상류에서 얕고 댐 부근에서 가장 깊었다. 환경요인 중에서 수평적 또는 수직적 차이가 큰 인자는 DO, Chl-a이었고,가장 작은 인자는 수온이었다. 수중 투명도는 0.6 ${\sim}$ 0.9 m범위(평균값 0.7 m)이었고, 탁도의 평균값은 9.3 NTU (8.0 ${\sim}$ l2.1 NTU범위)이었다. 후명도와 탁도의 증감요인은 생물 또는 비생물의 복한적인 영향으로 달 수 있었고 공간적인 차이도 탄영되었다. 수색이 탁한 것은 무기입자의 증가와 식물플랑크톤치 과대증식 영향이 주된 원인이었고, 여과지 폐색은 저수지로부터 식물플랑크톤의 과잉 공급에 의한 문제점이었다. 저수지 내 chlorophyll-a농도의 범위와 평균값은 상층에서 31.6 ${\sim}$ 258.9 ${\mu}g\;L^{-1}$, 123.6 ${\mu}g\;L^{-1}$, 저층에서 17.0 ${\sim}$ 37.4 ${\sim}$, 26.5 ${\sim}$이었다. Chlorophyll-a의 증가는 담수적조의 대발생 영향이었고, 주종은 와편모조류 Peridinium bipes f. occultatum이었다. Peridinium의 분포는 chlorophyll-a농도와 밀접한 관련성이 있었다. 담수적조의 현존량은 상류지역에서 $8.5\;{\times}\;10^3\;cell\;mL^L{-1}$로서 많았고, 댐부근의 하류지역($4.4\;{\times}\;10^2\;cell\;mL^L{-1}$)으로 갈수록 감소하는 양상을 보였다. 또한, 담수적조의 원인종으로 규조류 Synedra acus와 남조류 Microcystis aeruginosa도 소량관찰되었다. 저수지의 수질 부영양화 현상은 기존 경사사면형 농경지를 기반으로 조성되었으므로 저층으로부터 풍부한 영양환경을 내재하고 있었고, 담수 초기에 발생할 수 있는 가능성을 포함하고 있었다. 또한 유입수량의 부족과 현재 수질개선을 위해 적용하고 있는 수중폭기시설등의 물리적인 영향도 직 ${\cdot}$ 간접적으로 작용하였을 것으로 추정되었다 따라서 향후 이에 대한 중장기적인 모니터링이 필요하였고 유역과 저수지의 통합적인 수질관리계획 이 요구되었다.

• Investigative Magnetic Resonance Imaging
• /
• 제17권3호
• /
• pp.181-191
• /
• 2013

목적: 급성 신부전 쥐 모델에서 상자성 철 산화물 (superparamagnetic iron oxide(SPIO)로 표지한 인간탯줄혈관내피 세포를 자기공명영상으로 추적할 수 있는지 그 유용성을 평가하고자 하였다. 대상과 방법: 인간탯줄혈관내피 세포를 SPIO와 poly-L-lysine (PLL) 혼합물로 표지 하였다. SPIO 농도에 따라서 이완율, 세포 생존율, 표지 안정성을 SPIO 농도의 변화에 따라 평가하였다. 인간탯줄혈관내피 세포를 급성 신부전 쥐 모델에서 꼬리정맥을 통하여 주사하였다. MR을 이용한 추적 검사는 $T2^*$ 경사에코 MR 영상을 이용하였다. 1, 3, 5, 7일째 추적한 MR 영상 소견을 조직 소견과 서로 견주어 보았다. 결과: SPIO-PLL 혼합물을 표지 한 후 Prussian blue 염색에서 평균 $98.4{\pm}2.4%$ 세포가 양성반응을 보였다. 3일과 5일 후 측정한 이완율은 1일에 비해 큰 차이가 없었다. 인간탯줄혈관내피 세포를 SPIO로 표지 한 후 안정성이 유지됨을 알 수 있었다. 추적 MR 영상에서 급성신부전을 유도한 왼쪽 신장 외곽 신 수질에서 신호강도 소실을 보였으나 오른쪽은 정상이었다. 3, 5, 7일 후 촬영한 영상에서 왼쪽 신 수질에서 보인 신호강도 소실이 점차 사라졌으나 오른쪽 신장에서는 여전히 특별한 변화를 보이지 않았다. 조직학 검사에서도 MR 영상의 신호강도 소실이 Prussian blue 염색을 보인 부분과 일치하였다. 면역화학적 분석에서 신 수질에서 보인 세포들이 인간탯줄혈관내피 세포임을 확인하였다. 결론: MR 영상은 급성 신부전 치료의 한 방법인 세포 치료의 경우 세포 추적 검사에 유용하게 사용될 수 있음을 확인하였다.

• Tuberculosis and Respiratory Diseases
• /
• 제44권4호
• /
• pp.785-795
• /
• 1997

연구배경 : 종양 표지자는 각종 악성 종양의 진단, 진행정도, 절제 가능성, 예후추정, 치료후 추적 검사 등에도 사용될 수 있으나 민감도와 특이도가 만족스럽지 못한 경우가 많아서 임상에서 보조적인 수단으로 이용되고 있는 경우가 대부분이다. 최근 Cyfra21-1이 비소세포 폐암의 진단에 CEA, SCC보다 우수하다는 보고가 있었고 단일클론 항체를 이용한 TPA-M(Tissue polypeptide antigen)이 비소세포 폐암은 진단하는데 상당히 우수한 결과를 보인다고 보고하고 있다. 이에 폐암환자에서 혈청 CEA, SCC, Cyfra21-1, TPA-M의 임상적 유용성을 서로 비교해 보고자 이 연구를 시행하였다. 방 법 : 1996년 4월 1일 부터 19961건 8월 31일까지 계명대학교 의과대학 병원에 내원한 환자중 조직 생검으로 확진된 비소세포 폐암 37예와 소세포 폐암 12예를 총 49예를 폐암 환자군으로 같은 기간의 입원 환자 중 양성 양성 폐질환으로 확진된 29예를 대조군으로 선정하였고 폐암 환자의 경우 수술, 항암요법 및 방사선치료를 전혀 시행하지 않은 상태에서 혈청을 채취하여 검사를 시행하였다. CEA는 일본 Eiken사의 Ab bead CEA, SCC는 미국 DAINABOT사의 SCC RIA BEAD kit, Cyfra21-1은 일본 TFB사의 CA 21-1 kit, TPA-M은 일본 DAIICHI사의 TPA-M kit를 사용하였다. 결 과 : 전체 폐암환자와 대조군을 비교해보면 CEA가 $10.05{\pm}38.39{\mu}/L$, $1.59{\pm}0.94{\mu}/L$, SCC가 $3.04{\pm}5.79{\mu}/L$, $1.58{\pm}2.85{\mu}/L$, Cyfra21-1이 $8.27{\pm}11.96{\mu}/L$, $1.77{\pm}2.72{\mu}/L$, TPA-M이 $132.02{\pm}209.35U/L$, $45.86{\pm}75.86U/L$으로 나타났으며 Cyfra21-1과 TPA-M은 폐암환자에서 대조군보다 종양 표지자의 측정치가 유의하게 높았다.(p<0.05) CEA, Cyfra21-1, TPA-M, SCC의 cutoff value를 회사에서 권장하는 $2.5{\mu}/L$, $3.0{\mu}/L$, 70.0U/L, $2.0{\mu}/L$로 하였을 때 전체폐암에 대한 민감도와 특이도는 CEA 33.3%와 78.6%, Cyfra21-1 50.0%와 89.7%, TPA-M 52.3%와 89.7%, SCC 23.8%와 89.3%이었으며 비소세포 폐암에 대하여서는 CEA 36.1%와 78.1%, Cyfra21-1 50.1%와 89.7%, TPA-M 53.1%와 89.7%, SCC 33.8%와 89.3% 소세포 폐암의 경우에도 CEA 25.0%와 78.5%, Cyfra21-1 50.0%와 89.6%, TPA-M 50.0%와 89.6%, SCC 0%와 89.2%로 폐암환자에서 Cyfra21-1과 TPA-M이 민감도와 특이도에 있어 더 우수한 결과를 보였고 비소세포 폐암환자에서 SCC도 높은 특이도를 나타내었다. ROC(Receiver operating characteristic) curve에 따라 민감도와 특이도를 얻어 가장 정확도가 높은 cutoff value를 CEA $1.25{\mu}/L$, Cyfra21-1 $1.5{\mu}/L$, TPA-M 35U/L, SCC $0.6{\mu}/L$로 하여 민감도와 특이도, 정확도 및 kappa index를 비교해 보아도 Cyfra21-1과 TPA-M이 더 우수한 결과를 나타내었다. 병기에 따른 비소세포 폐암에서의 종양 표지자를 3A 병기까지와 3B 병기이상으로 나누어 비교해보면 3B 병기이상에서 SCC에서만 통계적 유의성을 보였다. (p<0.05) 그러나 종양크기에 따른 종양표지자의 측정치는 통제적 유의성이 없었다.(p>0.05) 결 론 : 혈청 TPA-M과 Cyfra21-1은 폐암환자에 있어 CEA나 SCC보다 민감도와 특이도가 높으며 SCC의 경우 비소세포 폐암에 있어 높은 특이도를 보였으며 SCC의 측정치가 병기와 유관하게 나타났으나 종양의 크기와 병기의 진행과의 관계에 있어서는 더 많은 환자들을 대상으로 한 연구가 행해져야 할 것으로 생각된다.

• Nuclear Medicine and Molecular Imaging
• /
• 제40권4호
• /
• pp.218-227
• /
• 2006

목적 : 헤르페스 심플렉스 1형 바이러스 티미딘 키나제(Herpes simplex virus type 1 thymidine kinase. HSV1-tk) 유전자는 보고 유전자로서 필요한 조건뿐만 아니라 별도의 치료 유전자를 따로 이입할 필요가 없다는 장점을 가지고 있어 유전자 영상과 치료에서 가장 널리 사용되는 유전자이다. 본 연구에서는 간암세포주에서 HSV1-tk 보고 유전자 발현을 비침습적 PET 영상으로 평가하는데 있어서 $9-(4-[^{18}F]Fluoro-3-hydroxymethylbutyl)$guanine ($[^{18}F]FHBG$)의 유용성을 평가하고자 하였다. 대상 및 방법 : $[^{18}F]FHBG$는 triester로부터 8단계를 거쳐 합성하였다. $[^{18}F]FHBG$는 전구체로 N2-monomethoxytrityl-9-[4-(tosyl)-3-monomethoxytritylmethylbutyl]guanine를 사용하고 kyptofix [2.2.2.]를 이용한 친핵성 반응으로 $120^{\circ}C$에서 20분 동안 반응한 후에 1 N HCl로 보호기를 제거함으로써 합성하였다. HSV1-tk 보고 유전자가 이입되어 있는 세포주인 MCA-tk와 이입되지 않은 MCA 세포주를 이용하여 in vitro 상에서의 $[^{18}F]FHBG$의 섭취 및 방출 실험을 실시하였으며 섭취량과 발현량의 상관성 평가를 위해 세포수 백분율에 따른 섭취실험을 실시하였다. In vivo 상에서의 평가를 위하여 피하 종양 형성 동물모델을 이용하여 microPET생체영상을 획득하였다. 결과: 합성된 $[^{18}F]FHBG$를 역상 HPLC를 사용하여, 머무름 시간 16-18분에서 분리하였다. 반감기를 고려한 방사화학적 수율은 20-25%, 방사화학적 순도는 95% 이상이었으며 비방사능은 55.0 $GBq/{\mu}\;mol$ 이상이었다. HSV1-tk 유전자가 이입된 MCA-tk 세포에서는 특이적인 $[^{18}F]FHBG$의 집적이 발생하였으며 대조군인 MCA에서는 거의 집적이 이루어지지 않았다. 또한, 방출 실험에서 방출 후 1시간 경과까지 86% 이상의 $[^{18}F]FHBG$가 세포내에 잔류하였다. MCA-tk 세포주의 비율이 증가함에 따라 $[^{18}F]FHBG$의 섭취량도 직선적 상관관계($R^2=0.995$)에 따라 증가하여 기질의 섭취량이 유전자 발현량을 잘 반영하고 있음이 확인되었다. MicroPET을 이용한 생체영상에서도 MCA와 MCA-tk 에서 확연한 집적의 차이를 보여주었다. 결론: 간암세포주에서 HSV1-tk 유전자의 발현 정도와 지속성 그리고 위치를 확인하기 위한 비침습적 PET 영상을 위한 기질로서 $[^{18}F]FHBG$는 매우 유용할 것으로 기대된다.

• 미생물학회지
• /
• 제45권3호
• /
• pp.246-250
• /
• 2009

레트로바이러스는 바이러스 외막과 숙주세포막의 융합에 의해 세포내로 들어간다. Moloney 마우스레트로바이러스(murine leukemia virus)의 외막 단백질은 표면단백질(SU)과 막단백질(TM)을 포함하는 85 kDa의 전구체로 합성되는데 바이러스의 성숙과정에 막단백질의 카르복시 말단 16개의 아미노산(R-peptide)이 바이러스의 프로티아제에 의해 절단된다. R 펩타이드가 절단된 막단백질은 Moloney 마우스레트로바이러스에 대한 수용체를 가진 NIH3T3 세포주에서 합포체(syncytium)를 형성한다. R 펩타이드가 절단된 막단백질의 합포체 형성 기작 연구를 위해 R 펩타이드가 절단되어 있으며 표면단백질의 PRR (proline rich region) 부위가 EGFP로 삽입되어진 Moloney full length molecular clone을 만들었다. 이 clone은 NIH3T3 세포에서 합포체를 형성하였으며 형광이 세포질과 세포막에서 관찰되었으나 핵은 염색이 되지 않고 검게 보여 신속 정확하게 합포체 관찰이 가능하였다. 흥미롭게도 절단된 막단백질을 가진 비리온이 NIH3T3 세포에서 광학현미경으로 관찰하였을때는 합포체를 형성하였으나 형광현미경에서는 형광이 관찰되지 않아서 비리온이 세포감염 없이 바이러스-세포 융합 방식으로 합포체를 형성한 것으로 생각되었다. 본 연구에서는 형광의 발현 여부로 합포체 형성을 신속 정확하게 관찰할 수 있는 방법을 개발하였으며 R 펩타이드가 절단된 비리온이 세포 감염 없이 세포와 세포 사이의 융합을 매개할 수 있음을 밝혔다.

• 한국수정란이식학회지
• /
• 제21권3호
• /
• pp.217-223
• /
• 2006

전국 65개 시군에 소재하는 착유우 20두 이상 규모의 760개 목장에서 85,983두를 대상으로 초음파 번식 검진 및 치료를 실시하여 다음과 같은 결과를 얻었다. 번식 검진우 85,983두 중 난소 질병이 40,399(47.0 %)로 가장 많았으며 자궁 질병 11,912두(13.9%), 임신 및 임신기 사고가 26,587두(30.9%), 난소나 자궁의 유착이 172두(0.2%), 프리마틴 8두(0.01%)그리고 분만 후 50일 이내로서 정상적인 발정 주기와 같은 기타가 6,905두(8.3%)로 나타났다. 번식 검진우에서 번식 장애에 대해 치료를 실시하였던 소는 30,241두로 이중 둔성 발정 또는 발정 발견의 잘못 14,909(49.3%), 난포낭종 3,750(12.4 %), 황체낭종 907두 (3.0%), 난소 기능부전 665두 (2.2%) 및 난소의 과립막 세포종 3두(0.01%)로 난소 질병이 20,234두로 66.9%를 차지 했고 나머지는 자궁 질병과 기타 질병이었는데 자궁 질병 중에서는 자궁 내막염이 6,986두(23.1%)로 가장 많았다. 정기적인 번식 검진 효과를 번식 지표로서 확인해 보았던 바 평균 분만 간격은 번식 검진 이전에는 475일이었으나 번식 검진 이후에도 381일로 단축되었고, 공태기는 186일에서 98일로 단축, 분만 후 첫 수정까지의 평균 일수는 106일에서 66일로 단축, 분만 후 60일 이내에 발정을 보여 주었던 소의 비율은 32%에서 90%로 증가, 첫 수정시 수태율은 42%에서 64%로 증가, 수태당 수정 회수는 2.6회에서 1.8회로 단축되었다. 따라서 정기적인 검진은 조기 임신 진단, 번식장애의 정확한 진단 및 적절한 치료로서 번식 효율을 증가시켜 농가의 생산성을 향상시켰다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.3-4
• /
• 2004

Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

• Tuberculosis and Respiratory Diseases
• /
• 제42권6호
• /
• pp.855-861
• /
• 1995

연구배경: 악성 종양 환자에서 PTHrp가 고칼슘혈증을 유발시킬 수 있음이 밝혀졌으며, 악성 종양 특히 편평상피세포 폐암에서 골 전이 없이 고칼슘혈증이 종종 관찰되므로 PTHrp가 암의 진행정도 및 예후와 관련이 있을 가능성이 있다. 정상 칼슘혈증인 폐암환자에서도 혈중 PTHrp를 측정하는 예민한 검사법을 이용하면 편평상피 폐암의 조기진단, 치료반응의 추적, 재발의 발견등에 도움을 받을 가능성이 있다. 방법: 조직학적으로 진단된 폐암 환자군 및 대조군의 혈중 PTHrp를 방사면역학 검사로 측정하여 폐암환자에서 각 세포형, 병기, 골 전이 유무에 따른 PTHrp의 혈중치와 혈청 칼슘 및 인, 24시간 요중 칼슘 및 인의 배설량과의 관계를 조사하였다. 결과: 혈청 PTHrp(평균$\pm$S.E.)는 대조군(n=22) $158{\pm}38.2pg/ml$, 전체 폐암군(n=63) $312{\pm}68.9pg/ml$으로 폐암군에서 높은 경향이지만 유의한 차이는 없었다. 각 세포형에 따라서는 편평상피세포암군(n=34) $356{\pm}103.9pg/ml$, 선암군(n=15) $281{\pm}148.7pg/ml$, 소세포암군(n=9) $316{\pm}140.8pg/ml$, 대세포암(n=1) 65.0pg/ml, 미분화 미분류 세포암군(n=4) $114{\pm}77.9pg/ml$로 편평상피세포암군에서 높은 경향이나 각 군 및 대조군 간에 유의한 차이가 없었다. 편평상피암의 병기에 따른 혈청 PTHrp(평균$\pm$S.E.)는 제 I병기(n=1) 143pg/ml, 제 II병기(n=3) $570{\pm}472.3pg/ml$, 제 IIIa 병기(n=9) $166{\pm}22.4pg/ml$, 제 IIIb 병기(n=12) $282{\pm}113.3pg/ml$, 제 IV 병기(n=9) $668{\pm}367.9pg/ml$로 제 II 병기와 제 IV 병기에서 대조군에 비해 유의하게 높았다(p<0.05). 골 전이가 있는 편평상피암(n=8)의 경우 혈청 PTHrp $1526{\pm}811.2\;pg/ml$로 대조군에 비해 유의하게 높았으나(p<0.0005), 골 전이가 없는 군은 대조군과 차이가 없었고, 혈청 및 24 시간 뇨중 calcium, phosphorus의 차이도 관찰되지 않았다. 고칼슘혈증은 편평상피암 1예에서 관찰되었으며, 이 예에서 PTHrp는 244pg/ml로 높지 않았다. 대조군, 폐암군, 폐암의 세포형 및 폐암의 병기에 따른 군간에 혈청 calcium, phosphorus, 24시간 뇨중 calcium, phosphorus에 유의한 차이가 없었다. 결론: 혈중 PTH게는 대조군에서도 상당량 검출이 되며, 정상 칼슘혈증인 폐암환자에서 다수 검출되고, PTHrp가 높아도 고칼슘혈증이 동반되지 않는 등 PTHrp로 종양의 체액성 고칼슘혈증 기전을 모두 설명할 수는 없으며, 폐암 조기발견의 표지자, 병기 및 예후 예측 인자로는 PTHrp 1-34 측정이 부적합하다고 판단 되지만 골 전이가 있는 진행된 예에서 증가하는 경향이므로 병기와 예후 예측인자, 치료 반응 및 재발 등에서의 응용 가능성에 대하여 적극적으로 검토할 가치가 있다. 앞으로 고캄슘혈증 환자에서 보다 많은 예를 시행하고 특이성이 높은 검사법을 개발하는 등의 추후 연구도 필요하다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.