• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.186-186
• /
• 2009

Most liquid crystal display modes, including the twisted nematic (TN) $mode^1$, the in-plane switching (IPS) $mode^2$, the fringe field switching (FFS) $mode^3$, and the vertically aligned (VA) $mode^4$ are based on either a horizontal or a vertical alignment. However, for some applications, such as no-bias-bend (NBB) pi cell or bistable bend-splay display, an intermediate pretilt angle is essential$^5$. NBB pi cells have been a focus of interest because of their fast response time; however, the reliable control of the intermediate pretilt angle of liquid crystals that is required for the fabrication of NBB pi cells is challenging. The controllable pre-tilt angle of liquid crystals was investigated using a blend of horizontal and vertical polyimide prepared by a rubbing method. Various pretilt angles in the range from 0^{\circ}$ to 90^{\circ}$ were achieved as a function of the vertical polyimide content. We observed uniform liquid crystal alignment on the rubbing-treated blended polyimide layer. A NBB pi cell with an intermediate pretilt angle of 47.8^{\circ}$ was manufactured. This cell had no initial bias voltage and a low threshold voltage, which indicates that it has low power consumption. In addition, the response time of the NBB pi cell was rapid.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.895-898
• /
• 2004

We propose configurations for a transflective in-plane switching (IPS) cell using muti-domain structures. Usually, the cell configurations for a transflective liquid crystal(LC) cell have a complicated structure, because retardation change of transmissive part and reflective part are not same. The transflective LC cell should have two configurations for each part, such as a multi-cell gap structure. With the ion-beam alignment and the horizontal switching LC cell, a simple structure for a transflective LC cell is proposed. The configuration only adopts one cell gap structure, which may help the enhancement of a yield. Their original optical properties in conventional transmissive and reflective type IPS liquid crystal dispaly(LCD) are kept, it shows the wide-viewing angle and the good wavelength dispersion characteristics.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.298-304
• /
• 2004

We fabricated a polymer dispersed liquid crystal (PDLC) cell using LC with negative dielectric anisotropy and UV curable monomer exhibiting transparent state initially (called normally transparent (NT)) and studied the electro-optic characteristics. The NT PDLC cell made with the ratio of LC : monomer = 70/30 wt%, curing temperature of 20 $^{\circ}C$ and strong UV intensity of 198 ㎽/$\textrm{cm}^2$ had high contrast ratio and showed good electro-optic characteristics. In this condition, LC is aligned vertically on the substrate due to the vertical alignment layer and the polymer made with the UV exposure does not influence the alignment of the LC much. Therefore, the transmittance at the zero voltage is very high and the scattering state of the cell is good after applying the voltage because LC with negative dielectric anisotropy tries to align perpendicular to the field. And also, the NT PDLC cell showed better viewing angle characteristics than that in the normally scattering (NS) PDLC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.27-38
• /
• 2012

In this paper, we introduce CoMP in 3GPP LTE-Advanced Release 11 to take care of shadowing effects appearing in cell-edge areas to meet rapidly increasing demand for high speed transmission and multi-media data. In order to mitigate interference, orthogonalizing is ideal but it is slightly difficult to be applied to real systems. Therefore, interference alignment and avoidance are used in practical applications. Interference alignment is a scheme enabling us to consider interference our friend not enemy. We show lattice codes in Gaussian channel achieve Shannon capacity where strong interference exists. In addition, we show the relationship between channel parameter a and DoF(Degree of Freedom) applying lattice codes to interference alignment for interference channel with three users.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.385-390
• /
• 2000

The alignment of the prosthetics is very important in an amputee's gait. In the present study. a static prosthesis-alignment device was developed. It consisted of a force plate with four load cells, a laser beam controlled by a step motor, and a control part programmed by PCBASIC. Using the static prosthesis-alignment device, we measured the distance between the load line and various joints of 24 normal volunteers in three standing postures. such as neutral, forward leaning, and backward leaning. Only neutral postures were evaluated on four trans-tibial amputees. The load line for the normal person's neutral position located anterior to the ankle, the knee, and the greater trochanter, but posterior to the shoulder joint. Forward and backward leaning of the normal person resulted in a significant anterior and posterior movements of the load line, respectively. The load line for the amputated side of the trans-tibial amputee also located anterior to the ankle, the extremity prostheses, providing a good relative locations of the load line with respect to various joints.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.594-598
• /
• 2019

We demonstrate an alternative alignment process using transferring process on solution driven HfZnO film. Parallel pattern is firstly fabricated on a silicon wafer by laser interference lithography. Prepared HfZnO solution fabricated by sol-gel process is spin-coated on a glass substrate. The silicon wafer with parallel pattern is placed on the HfZnO film and annealed at $100^{\circ}C$ for 30 min. After transferring process, parallel grooves on the HfZnO film is obtained which is confirmed by atomic force microscopy and scanning electron microscopy. Uniform liquid crystal alignment is achieved which is attributed to an anisotropic characteristic of HfZnO film by parallel grooves. The liquid crystal cell exhibited a pretilt angle of $0.25^{\circ}$ which showed a homogeneous alignment property.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.1-4
• /
• 2000

We have developed a high performance vertical alignment TFT-LCD, that shows a high light transmittance, and wide viewing angle characteristics with an unusually high contrast ratio. In order to optimize the electro-optical properties we have studied the effect of cell parameters, multi-domain structure and retardation film compensation. With the optimized cell parameters and process conditions, we have achieved a 24" wide UXGA TFT-LCD monitor (16:10 aspect ratio 1920X1200) showing a contrast ratio over 500:1, panel transmittance near 4.5%, response time near 27 ms, and viewing angle higher than 80 degree in all directions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.575-578
• /
• 2004

In this study, we designed HAN(hybrid-aligned nematic) cell using novel tilt angle control method. It was possible to make novel HAN cell using a single polyimide by hot plate baking method. This new HAN cells showed slower response time as compared with conventional HAN cell. However, the alignment state and V-T curve of HAN cell using novel method were acceptable. Also, it showed better C-V characteristic than that of conventional HAN cell.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.16-17
• /
• 2009

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.988-996
• /
• 2012

Assuming perfect channel state information (CSI), the conventional interference alignment (IA) algorithm in the uplink cellular system suppresses inter-cell interference (ICI) by aligning ICI to a randomly selected reference vector. However, IA in practice relies on limited feedback between base stations and users, resulting in residual ICI. In this paper, we propose the optimization of the reference vector that minimizes the upper-bound of residual ICI power. Secondly, the iterative IA that designs the direction of transmit and receive filter is proposed to minimize the residual ICI as well as maximize the desired signals. Moreover, we propose the user scheduling method combined with proposed IA schemes which provides the multiuser diversity gain in multi-cell environments. Finally, the performance gain of the proposed IA algorithms compared with the existing IA are analyzed and demonstrated by simulation results.