• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.260-264
• /
• 2017

Process variation effect on arch-structured gate stacked array (GSTAR) 3-D NAND flash is investigated. In case of arch-structured GSTAR, a shape of the arch channel is depending on an alignment of photo-lithography. Channel width fluctuates according to the channel hole alignment. When a shape of channel exceeds semicircle, channel width becomes longer, increasing drain current. However, electric field concentration on tunnel oxide decreases because less electric flux converges into a larger surface of tunnel oxide. Therefore, program efficiency is dependent on the process variation. Meanwhile, a radius of channel holes near the bottom side become smaller due to an etch slope. It also affects program efficiency as well as channel width. Larger hole radius has an advantage of higher drain current, but causes degradation of program speed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.271-272
• /
• 2009

We fabricated a hybrid aligned film using reactive rod-like mesogen to reduce light leakage of twisted nematic(TN) cell in off-axis of the dark state. We proved that the fabricated compensation film has hybrid alignment by changing phase retardation according to polar angle. In this paper, we confirmed characteristics of compensation film through simulation results and found the matching factor of simulation results and experimental result. In result, the maximum pretilt angle of hybrid compensated film is $19^{\circ}$ which has phase retardation 0.1445.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.506-509
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using thin plastic substrates. The LC aligning capabilities and pretilt angle of the thin plastic substrates by in-situ photoalignment method were better than that of the glass substrate by general photoalignment. Also, the LC pretilt angle increased with increasing heating temperature and exposure time. And EO characteristics of photoaligned TN-LCDs using in-situ photodissociation method on glass substrate and on plastic substrate are also excellent.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.858-861
• /
• 2006

In this paper we model the liquid crystal director field in the Patterned Vertical Alignment (PVA) LC using the fast Q-tensor method, which can model multidimensional director configurations with defects in the liquid crystal director field. We observed the dynamic behaviors of the defect experimentally by applying the voltage and modeled the LC director field with defect in the active area of the PVA cell. As a result, we could also calculate the optical transmittance.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.16-18
• /
• 2009

A three-terminal hybrid-aligned nematic liquid crystal (3T-HAN LC) cell capable of fast turn-off switching is proposed in this paper. By employing the relaxation process initiated by an electric-field pulse, a fast turn-off time of less than 1 ms can be obtained through optically hidden relaxation. A low operating voltage and high transmittance were confirmed through simulations and experiments.

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.902-908
• /
• 2002

Homogeneously aligned nematic liquid crystal displays (LCDs) driven by in-plane or fringe field were known to exhibit wide viewing angle and appeared to be black in the off state. However, the existence of spacers inside the cell causes the deformation of the liquid crystal molecules. Such a deformation of the liquid crystal causes light-leakage in the dark state, which lowers contrast ratio of the display. We found that the light-leakage due to deformation of the LC director near the spacer mainly depends on the dielectric anisotropy and the ratio of elastic constants of the LC. In this paper, the mechanism on deformation of the LC near spacer is investigated by optical polarizing microscopy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.169-169
• /
• 2017

Due to key roles for the electrochemical stability and charge capacity the solid-electrolyte interphase (SEI) has been extensively studied in anodes of a Li-ion battery cell. There is, however, few of investigation for cathodes. Using first-principles based calculations we describe atomic-level process of the SEI layer formation at the interface of a carbonate electrolyte and $LiMn_2O_4$ spinel cathode. Furthermore, using beyond the conventional density functional theory (DFT+U) calculations we examine the work function of the cathode and frontier orbitals of the electrolyte. Based on the results we propose that proton transfer at the interface is an essential mechanism initiating the SEI layer formation in the $LiMn_2O_4$. Our results can guide a design concept for stable and high capacity Li-ion battery cell through screening an optimum electrolyte fine-tuned energy band alignment for a given cathode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.403-406
• /
• 2005

We optimized a patterned-vertical-alignment (PVA) transflective liquid-crystal (LC) cell for small pixel application. To achieve the high resolution display performance in the mobile communication equipments such as mobile phones, personal data assistants, and tablet personal computers, we optimized the parameters of liquid crystal and the electrode structure. Both the transmittance and the reflectance are maximized at the same time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.459-460
• /
• 2008

Zinc oxide micro rods were fabricated using as chemical bath deposition ok photolithography. Vertically aligned Zinc Oxide rod array as grown by chemical bath deposition method on Zinc Oxide template layer. The ZnO template layer was deposited on glass and the pattering was made by standard photolithography technique. The selective growth of ZnO micro rods were achieved with the masked ZnO template layer substrate. The fabricated ZnO micro rods were found to be single crystalline and have grown along hexagonal c-axis direction of (0002) which is same as the preferred growth orientation of ZnO template layer. The ZnO micro-rod array structure was implemented as a window layer in Cu(InGa)Se2 solar cell and its effect on photovoltaic efficiency was examined.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.477-480
• /
• 2003

We investigated the electro-optical (EO) performances of the super twisted nematic liquid crystal display (STN-LCD) on the polyimide (PI) surface using polymer film. Monodomain alignment of the plastic STN-LCD can be observed. A stable voltage-transmittance (V-T) curve of the plastic STN-LCD was observed on the polyimide (PI) surfaces using polymer film. Also, a faster response time for the plastic STN-LCD on the polyimide (PI) surfaces using polymer film can be achieved. However, the transmittance of the plastic STN-LCD on the polyimide (PI) surfaces using polymer film decreased greatly as cell gap decreases.