• Journal of dental hygiene science
• /
• v.11 no.4
• /
• pp.333-337
• /
• 2011

The purpose of this experiment was to examine possibility of microleakage by water, temperature change, and bite force inside the mouth during the period of using light-activated temporary filling materials. 2 kinds of light-activated temporary filling materials were used in order to measure weight and compressive strength and to evaluate microleakage between filling material and cavity wall according to frequency of thermal circulation. First, Light-activated temporary filling material was increased the weight, which was measured according to the period of using. As for the result of comparing between products, the weight of Quicks was indicated to be higher. Second, Compressive strength of Spacer had significant difference depending on period of using. However, significant difference wasn't shown in the compressive strength of Quicks. In Spacer that showed significant difference, the compressive strength increased greatly in the difference of 3 days. Third. As for micro-leakage according to frequency of thermal circulation, the microleakage was indicated to be the highest in the group that carried out 7,000 times. The group with operation of 1,000 times and the group with operation of 3,000 times were indicated the statistically lower micro-leakage than the group with operation of 7,000 times. This study brought about a rise in micro-leakage depending on the passage in the period of using. However, it is obvious fact that micro-leakage increases according to the passage of time after restoration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.6
• /
• pp.437-447
• /
• 2013

The fibula is one of the most useful sources for harvest of a vascularized bone graft. The fibula is a straight, long, tubed bone, much stronger than any other available bone that can currently be used for a vascularized graft. It has a reliable peroneal vascular pedicle with a large diameter and moderate length. There is a definite nutrient artery that enters the medullary cavity, as well as multiple arcade vessels, which add to the supply of the bone through periosteal circulation. The vascularized fibula graft is used mainly for long segment defects of the long tubed bone of the upper and lower extremities. It can provide a long, straight length up to 25 cm in an adult. The fibula can be easily osteotomized and can be used in reconstruction of the curved mandible. Since the first description as a vascularized free fibula bone graft by Taylor in 1975 and as a mandibular reconstruction by Hidalgo in 1989, the fibula has continued to replace the bone and soft tissue reconstruction options in the field of maxillofacial reconstruction. For the better understanding of a fibular free flap, the constant anatomical findings must be learned and memorized by young doctors during the specialized training course for the Korean National Board of Oral and Maxillofacial Surgery. This article reviews the anatomical basis of a fibular free flap with Korean language.

• Journal of Chest Surgery
• /
• v.12 no.3
• /
• pp.207-214
• /
• 1979

This 3-year-old girl was observed frequent exertional dyspnea and cyanosis at crying since birth. She was not premature baby and delivered at full term normally. On physical examination, she was underdeveloped-body weight 13.5 kg, height 99 cm.- and cyanotic. There was severe clubbing on fingers. There was grade II/VI ejection systolic murmur on left lateral border of the sternum. The preoperative examinations [EKG, echocardiogram, cardiac catheterization and biventriculogram] showed that complicated T.G.A. combined vena cava[S.D.D.]. Preoperatively, we decided the corrective surgery of Rastelli operation using a. pulmonary valved conduit. The operation was performed under total circulatory arrest using deep profound hypothermia combining with extracorporeal circulation. On operation, the anatomy of the heart showed that, 1. The subaortic conus was seen and subaortic muscles were hypertrophied. 2. The VSD[type II], behind the subaortic conus-about 1 cm. in diameter, was visible only through LV cavity and, 3. The pulmonary valve ring was hypoplastic and pulmonary valvular stenosis was seen also. The subpulmonic area [LV outflow tract] was obstructed with hypertrophied muscle and mitral valve. 4. Left superior vena cava was drained to RA via coronary sinus. 5. LAD coronary artery was originated from right coronary artery and ran anterior to the pulmonary artery. According to above anatomy, we performed the VSD closure with Teflon patch, and Mustard operation combined with LV-to-pulmonary artery bypass graft using the valve contained [Hancock 16 mm] conduit. Postoperatively, adequate blood pressure could be maintained under the state of using inotropic agent [epinephrine]. On the second postoperative day, the patient died of cardiac arrest due to low cardiac output syndrome, acute renal failure and pulmonary edema.

• Journal of the Korean Society of Physical Medicine
• /
• v.2 no.2
• /
• pp.151-159
• /
• 2007

Purpose : The purpose of the study was to investigate the effect of cold application on knee joint in rats induced by osteoarthritis. Methods : Osteoarthritis was induced in female Sprague-Dowley rats by injecting into articular cavity of knee joint with 4% Kaolin, 2% carrageenan. Rats were divided randomly into the control and MES applicated group. The Experimental group was applicated MES in rat knee joint for 30 minutes. Results : Recovery of articular cartilage surface and thickness of articular cartilage increased after MES application. And chondrocytes were distributed widely throughout the cartilage matrix. The physical effects of Microcurrent Electrical Stimulation. Decrease in blood flow. Delay of neurotransmitter velocity Decrease in metabolism activity and inhibit the progress of the infection. Decrease in pain and muscle rigidity, inhibition of circulation Conclusion : This study shows that MES application affects articular cartilage recovery in osteoarthritis.

• Journal of Chest Surgery
• /
• v.19 no.3
• /
• pp.443-448
• /
• 1986

Aortic dissection is a serious disease that mortality does not approach to zero despite of medical and surgical improvement. Recently two cases of aortic dissection were treated with good results by the two other methods. Case 1 [57-Y-0-Male]; Chief complaint was chest pain radiating to the back. Preoperatively he was controlled by Minipress, dichlotride, & sodium nitroprusside. Aortography showed DeBakey Type III aortic dissection extending from just below the Lt. subclavian artery to the proximal portion of the origin of the renal artery. Through the midline long incision Flow reversal & Thrombo-exclusion method was used, and bypass course was proximal anastomosis at the ascending aorta - through the Rt. thoracic cavity - midportion of the diaphragm - posterior to the liver, stomach, & pancreas - distal anastomosis at the abdominal aorta proximal to its bifurcation. Bypass graft was preclotted 20 mm Dacron Woven Graft, and the aortic arch between the Lt. subclavian artery & Lt. common carotid artery was divided and meticulously sutured. Control aortogram which was done at 4th postoperative month revealed obstruction of the false lumen by thrombosis, and complications were not noticed. Case 2 [53-Y-0-Male]; Chief complaint was chest pain radiating to the abdomen. DeBakey Type III aortic dissection which was similar to the case 1 was detected by the aortography, and involvement of the Lt. subclavian & common carotid arteries was suspicious. Through the Lt. posterolateral thoracotomy the Ringed Intraluminal Sutureless Graft, No. 22 mm, was inserted from just below the Lt. common carotid artery to the midportion of the descending thoracic aorta under total circulation arrest using a F-F bypass, and the Lt. subclavian artery was ligated. Postoperatively hospital course was uneventful with antihypertensive drugs, and any specific complications were not noticed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.41-50
• /
• 1989

A basic formulation of the panel method, which is based on the potential field formulation, is reviewed for the case of two-dimensional hydrofoil problems. Numerical procedures to improve the computational efficiency of the panel method are suggested. By investigating local behavior of the flow around the trailing edge, a wedge type Kutta condition is formulated. By subdividing the trailing edge panels, where dipole strengths of the subdivided panels follow the local behavior of the potential values of the flow outside a wedge, the circulation around a hydrofoil is calculated accurately with a relatively small number of panels. The subdividing technique to improve the accuracy of the numerical Kutta condition is proved to be efficient. A local behavior of the flow around the leading edge is also investigated. By matching the flow around the leading edge with that around a parabola, a very accurate velocity distribution is obtained with relatively small number of panels. An accurate prediction of the stagnation point and the pressure distribution near the leading edge may contribute to improve the accuracy of cavity predictions and boundary layer calculations around hydrofoils.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.1
• /
• pp.47-54
• /
• 1996

Although the use of the antibiotics has minimized the dangers of the spread of odontogenic infection to adjacent important organs, sometimes the fatal cases, such as Ludwig's angina, mediastinitis, intracranial complications from the odotogenic infection, may be occurred. The odontogenic infections or oral and maxillofacial region may involve the intracranial area through systemic circulation or by direct spread into the intracranial cavity. Headache, malaise, loss of appetite, chills, fever, vomiting, apathy, and irritability are usually followed by more specific involvement of the nervous system. We experienced one patient who died of intracranial complication from odontogenic infection. So we report the case and the literatures about intracranial involvements following odontogenic infections and dental procedures.

• Journal of Oral Medicine and Pain
• /
• v.34 no.3
• /
• pp.333-340
• /
• 2009

Osteomyelitis means inflammation of the bone marrow. It usually begins in the medullary cavity, involving the cancellous bone; then it extends and spreads to the cortical bone and eventually to the periosteum. The cause is usually thought to be microbiological. But there still are factors that predispose to produce a possible bone infection such as injuries, syphilis, actionomycosis, chronic kidney failure, alcoholism, malnutrition, radiotherapy, and chemotherapy. Treatment of modalities have been directed toward eradicating microbes and improving circulation in the early stage. In the case presented, surgical debridement and IV antibiotics were the treatment of choice. Osteomyelitis in children is mainly affected in the mandible. And in childhood, the mandibular condyle is regarded as an important center of mandibular growth. Therefore, in young patients, osteomyelitis involving this region may cause a restraint of mandibular development, resulting in facial asymmetry. So diagnosis in the early stage is important in child with osteomyelitis. Recently, we have encountered an interesting case of osteomyelitis of the mandibular condyle in 9-year-old boy. So we present the case and review the literature about osteomyelitis.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.301-316
• /
• 1995

experimental and computational studies ore carried out to investigate the natural convection of the single phase flow in a tank with a heated horizontal plate facing downward. This is a simplified model for investigations of the influence of a core melt at the bottom of a reactor vessel on the thermal hydraulic behavior in a oater filled cavity surrounding the vessel. In this case the vessel is simulated by a hexahedron insulated box with a heated plate Horizontally mounted at the bottom of the box. The box with the heated plate is installed in a water filled hexahedron tank. Coolers are immersed in the U-type water volume between the box and the tank. Although the multicomponent flows exist more probably below the heated plate in reality, present study concentrates on the single phase flow in a first step prior to investigating the complicated multicomponent thermal hydraulic phenomena. In the present study, in order to get a better understanding for the natural convection characteristics below the heated plate, the velocity and temperature are measured by LDA(Laser Doppler Anemometry) and thermocouples, respectively. And How fields are visualized by taking pictures of the How region with suspended particles. The results show the occurrence of a very effective circulation of the fluid in the whole How area as the heater and coolers are put into operation. In the remote region below the heated plate the new is nearly stagnant, and a remarkable temperature stratification can be observed with very thin thermal boundary. Analytical predictions using the FLUTAN code show a reasonable matching of the measured velocity fields.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.151-156
• /
• 1984

The Chili fish, one of the most common species of the freshwater fishes, is distributed in the river basins of the western coast of Korea. However, any studies on this fish, especially its development or life history, have not been made so far. The authors, therefore, carried out an experiment to reveal some characteristics of egg develoment and fry in this fish. For accomplshing this study, we caught some adult Chili fish by means of a casting net at raceway in the vicinity of Kunsan in June and July, 1983; then, we injected 0. 1 cc Gonadotrophic hormone 1,000 unit solution (Puberogen) in order to induce the spawning on the abdominal cavity of male and female respectively, Approximately 12 hours after injection, the artificially fertilized eggs by using of the dry method and the naturally fertilized eggs were observed simultaneously in the aquarium ($30{\times}50{\times}70cm$). The fertilized eggs, in spherical shape, were sperative, demersel, adhesive nature and $1.38{\sim}1.59\;mm$ in diameter. The light yellow yolk was opaque and $1.17{\sim}l.27\;mm$ in diameter. The hatching of eggs took place at 29.5 hours after fertilization under the condition of $23.5{\sim}25.0^{\circ}C$ water temperature. Basically there were not found so many different aspects in comparison with the common species of Cyprinidae in the development process of eggs : however, there were a few noticable characteristics, that is, pigment cells, eye balls and blood circulation are invisible, or the velocity of egg development is rapid, seemed similar to the Loach's egg. Newly hatched larvae with the yolk sac (2.39 mm in size) were $3.87{\sim}3.99\;mm$ in total length and their myotome number was expressed as 28+15=43. About 20 hours after hatching, a caudal and a pectoral fin as well as an anus began to orgin. In addition, a few malanophore showed on the upper regin of the yolk sac of the larvae whose size was 4.73 mm in total length. The larvae developed about 5.02 mm in total length, and the median fin fold in the abdomen extended forward to two thirds or beyond of the yolk sac at 50 hours after hatching. Simultaneously, the eye balls and mouth also appeared. After 3 days, the yolk sac nearly disappeared, and the larvae (5.4 mm in total length) with perfect eye balls began to swim for themselves for the first time. Also, the specialization between the gill arches and the ailmentary canal, the development of each fins except dorsal fin as well as the blood circulation obviously distinguished in this stage. The larvae whose total length was 5.68 mm was very brisk: also, the development of the dorsal fin rudiment, nearly perfect formation of each organs and the function of the upper and lower jaws were noticeably observed 5 days after hatching.