• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.659-662
• /
• 2009

Railway has been pointed to the efficiency of transportation, rapid transit, and comfortable train ride. the construction of railway near the downtown area and station building are increasing for maximization of utilization and convenience. but the heavy of transportation and rapid transit lead to increase noise and vibration. the noise and vibration of railway may cause the civil appeal, decline in the serviceability and insufficiency of environmental standard. In this study, floating slab system which is one of the solution to avoid noise and vibration in railway has been introduced, and analyzed floating Slab Track into arrangement of reduction material of vibration. As a result of analysis, It was estimated the bearing installation though slab have not a negative factor and terminal arrangement of reduction material of vibration have advantage for static behavior.

• 대한두경부종양학회지
• /
• 제15권1호
• /
• pp.76-79
• /
• 1999

The relationship between acute pancreatitis and hyperparathyroidism has been described extensively in the past. Despite the rarity, the clinical progression of pancreatitis associated with hyperparathyroidism has been known to be so rapid and severe that it may cause death. When, furthermore, the pancreatitis is caused by hyperparathyroidism, the recovery from disease can be hardly expected unless the hyperparathyroidism is corrected. We present a case of acute pancreatitis in a 68-year-old man that have been caused by primary hyperparathyroidism. The clues of hyperparathyrodism were hypercalcemia and elevated parathyroid hormone, but he showed subtle or negative symptoms of hypercalcemia. After the excision of parathyroid adenoma, serum calcium level returned to normal and the symptoms and function of pancreas were recovered.

• Journal of information and communication convergence engineering
• /
• 제21권4호
• /
• pp.294-299
• /
• 2023

Micro ribonucleic acids (miRNAs) can regulate the protein expression levels of genes in the human body and have recently been reported to be closely related to the cause of disease. Determining the genes related to miRNAs will aid in understanding the mechanisms underlying complex miRNAs. However, the identification of miRNA-related genes through wet experiments (in vivo, traditional methods are time- and cost-consuming). To overcome these problems, recent studies have investigated the prediction of miRNA relevance using deep learning models. This study presents a method for predicting the relationships between miRNAs and genes. First, we reconstruct a negative dataset using the proposed method. We then extracted the feature using an autoencoder, after which the feature vector was concatenated with the original data. Thereafter, the concatenated data were used to train a long short-term memory model. Our model exhibited an area under the curve of 0.9609, outperforming previously reported models trained using the same dataset.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.78-85
• /
• 2015

This paper presents a new structure of single-stage flyback power factor correction (PFC) converter with a controllable coupled negative magnetic feedback (NMF) winding. NMF winding is used to reduce the bulk capacitor voltage at high line voltages and light loads. However, it would cause line current distortion at zero crossing condition. In the proposed circuit, a series winding is used with NMF inductor to eliminate the NMF inductor at low line voltages. As a result, the dead angle of the input current, near zero voltage crossing, is eliminated and the power factor is increased. The presented experimental results of the proposed PFC converter confirm the integrity of the new idea and the theoretical analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1548-1552
• /
• 2007

The roll forming machines currently used in industries require manual change of individual rolls taking 30 to 60 minutes of operation shutdown, This in turn reduces the operational efficiency by considerable margin and has one of the major negative effect on the overall productivity. To improve the operational efficiency of the existing roll forming machine, current manual roll changing process needs automatation to save considerable amount of time. In this study, TRIZ is adopted in the development of new roll forming machine. The Ideal Final Result (IFR) was set up initially and the fundamental causes were examined by Root Cause Analysis. The final proposed concept was drawn from the application of 40 invention principles of TRIZ.

• 대한두개안면성형외과학회지
• /
• 제20권4호
• /
• pp.265-269
• /
• 2019

Congenital hypoplasia of the depressor anguli oris muscle is a rare cause of asymmetrical crying facies in newborns. The clinical manifestations range from mild to severe asymmetry and may persist up to adulthood. In the current case, the patient did not exhibit other congenital anomalies or paralysis of other branches of the facial nerve. This adult patient presented with severe asymmetrical lower lip deformity during full mouth opening since birth. A chromosomal study for the detection of 22q gene deletion yielded negative results. The electromyography findings of the lower lip were insignificant. Depressor labii inferioris muscle resection was not effective, but bidirectional (horizontal and vertical) fascia lata grafting improved the aesthetic appearance of the asymmetrical lower lip. The patient showed improved lower lip symmetry during full mouth opening at 1 year after the surgery. Therefore, the details of this rare case are reported herein.

• Clinical and Experimental Pediatrics
• /
• 제56권11호
• /
• pp.459-464
• /
• 2013

Improving mental health and reducing the burden of mental illness are complementary strategies which, along with the treatment and rehabilitation of people with mental disorders, significantly improve population health and well-being. A Institute of Medicine report describes a range of interventions for mental disorders that included treatment and maintenance, reserving the term "prevention" for efforts that occur before onset of a diagnosable disorder. Mental health problems affect 10-20% of children and adolescents worldwide. Despite their relevance as a leading cause of health-related disability and their long lasting consequences, the mental health needs of children and adolescents are neglected. Early intervention can help reduce the significant impacts that children and adolescents with serious mental health problems may experience. Screening is the first step in early intervention, recognizing emotional and behavioral problems and providing help at an early stage. It is essential to implement early intervention in a sensitive and ethical manner to avoid any of the negative outcomes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권6호
• /
• pp.2118-2138
• /
• 2014

Risks are involved in all phases of the software life cycle, and due to these risks, software can face various problems that can cause different negative outcomes and sometimes, in extreme cases, the failure of the software. Most of these risks lie in the legacy software migration process. These risks can create many problems, and in the worst case they can lead to the failure of the migration project. This paper explores different types of risk analysis methods such as CRAMM, CORAS, OCTAVE and VECTOR. After comparing these methods, the two suitable methods were chosen, namely, OCTAVE and VECTOR. Based on the use of these two methods, the project suggests an enhanced EOV method for risk analysis in the migration of legacy software.

• 한국국방경영분석학회지
• /
• 제17권2호
• /
• pp.44-53
• /
• 1991

This paper is aimed to develop a Lanchester type combat model for the direct-fire engagement. This model incorporates number of combatants, inter-firing time, detection time by movement, detection probability by the signature of fire, where the inter-firing time and the detection time are assumed to follow a negative exponential distribution. The approach to modeling is as follows : in the process of an engagement, a combatant takes one of the states('observing' state or 'firing' state), a combatant is initially in the observing state, if the combatant detects a target, he changes his state from 'observing' to 'firing' and will cause attrition to the opposing forces. Thus this transition mechanism is embodied into the differential equation form with each transition rate. A limited examination of the validity has been conducted by comparison with the Monte-Carlo simulation model 'BAGSIM', and with a traditional Deterministic Lanchester model.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.37-45
• /
• 2007

End-milling is intermittent cutting process performed by a tool with a number of teeth. Its cutting forces are commonly measured by the tool dynamometer which has rectangular coordinates. In this case, the pattern of cutting forces is different according to cutting conditions. At a certain cutting condition, the sign of cutting force changes from positive to negative during a revolution of one tooth. The change of force direction excites a cutting tool and severe vibration arises when radial depth of cut increases. In this study, cutting experiments and simulations were carried out in order to explain the cause of the change of the cutting force direction. In addition, the effect of the cutting force change was discussed in terms of chatter vibration in end milling.