• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.379-384
• /
• 1997

High quality MCM-41 is prepared from a gel of molar composition SiO2:0.20 CTACl:0.18 TMAOH:25 H2O aged at 20 ℃ for 24 hours before crystallization lasting for 48 hours. The (110) and (200) peaks of XRD pattern of high quality MCM-41 are unusually well resolved and the FWHM (full-width-at-half-maximum) of the (100) peak is 0.13° for as-prepared MCM-41 and 0.21° for calcined one, which indicate well-developed crystals. The properties of the crystal depend on the source and concentration of the reactants and the gel aging time. There is no induction period in the course of the synthesis, which is conveniently monitored by pH measurement. Gel aging, during which a spatial distribution of silicate polyanions and micellar cations is established, is essential for preparing high quality MCM-41. Surfactants with the same cationic organic group but different counteranions change the crystallization behavior. Highly basic gel (pH=12.6) favours the lamellar product; the quality of MCM-41 is lower as insufficient TMAOH is available to dissolve the silica.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.25-33
• /
• 2008

Organic disulfide compounds are having higher theoretical capacity than the conventional cathode material and are considered as the important storage material. Here, we are reporting the preparation of poly (2,2'-dithiodianiline) PDDA/multiwall carbon nanotubes, (MWCNTs) composites under different experimental conditions. Amine functionalized and unfunctionalized MWCNTs were independently used for the preparation of composites. Composites were prepared in the presence of cetyl trimethyl bromide (CTAB), a cationic surfactant, and also in the absence of CTAB. A physical mixture of PDTDA and MWCNTs was formed with unfunctionalized MWCNTs. Grafting of PDDA onto MWCNTs was performed by chemical oxidative polymerization of 2, 2'-dithiodianiline in the presence of amine functionalized MWCNTs. The composites of MWCNTs and PDTDA were characterized for structure, morphology and thermal properties through Fourier transform infrared spectroscopy, Fourier transform Raman spectroscopy, scanning electron microscopy and UV-visible spectroscopy. The composite materials prepared by this method are expected to find applications as electrode materials for lithium batteries.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.960-968
• /
• 2012

In this study, the measurement of physical properties of 3 different ethylene oxide adducted zwitterionic surfactants were measured such as critical micelle concentration, surface tension, interfacial tension, contact angle, viscosity and foam stability. Also, the dual function characteristics of the zwitterionic surfactants were investigated by determining an isoelectric point, which were obtained using zeta potential measurement and QCM (quartz crystal microbalance) experiments. The isoelectric point of the synthesized zwitterionic surfactant determined by zeta potential measurement was close to that obtained by QCM experiment and both results have shown almost the same trend as that determined by the frictional property measured using an automated mildness tester. In particular, it has been observed that all three surfactants used during this study provide better softening effect at a pH of neutral condition than at an acidic or an alkaline condition. This result indicates that the synthesized surfactants act as a cationic surfactant at a pH of neutral condition and thus provide good softening effect during a rinsing cycle in the detergency process.

• Clean Technology
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2009

Mesoporous aluminas (A-C, A-A, and A-N) were prepared by a templating method using cationic(C), anionic(A), and non-ionic(N) surfactant as a structure-directing agent, respectively. Nickel catalysts supported on mesoporous alumina (Ni/A-C, Ni/A-A, and Ni/A-N) were then prepared by an impregnation method, and were applied to hydrogen production by steam reforming of liquefied natural gas (LNG). Regardless of surfactant type, nickel species were finely dispersed on the surface of mesoporous alumina in the calcined catalysts. It was revealed that interaction between nickel species and support in the reduced catalysts was strongly dependent on the identity of surfactant. LNG conversion and $H_2$ composition in dry gas increased in the order of Ni/A-C < Ni/A-A < Ni/A-N. It was found that catalytic performance increased with increasing nickel surface area in the reduced catalyst. Among the catalyst tested, Ni/A-N catalyst with the highest nickel surface area showed the best catalytic performance.

• KSBB Journal
• /
• v.5 no.3
• /
• pp.215-221
• /
• 1990

The solubilization of BSA, pepsin, trypsin and ribonuclease-a in cationic reverse micellar solutions has been investigated. For complete solubilization into reverse micellar solutions, pH values of several pH units above the isoelectric point of each protein were required. Solubilization was observed to decrease with increasing ionic strength of KCI. The size of empty micelles showed no significant change with increasing ionic strength. Trioctylmethyl ammonium chloride (TOMAC) in cyolohexane showed the lowest solubilization for the proteins. The system didodecyl dimethyl ammonium bromide (DDAB)-tetrachloroethylene was capable of solubilizing larger amounts of proteins than the system DDAB-benzene. Cetyl trimethyl ammonium bromide(CTAB)-hexanol-isooctane system showed lower solubilization than DDAB-tetrachloroethylene system, while it had higher Wo value.

• Analytical Science and Technology
• /
• v.14 no.2
• /
• pp.167-172
• /
• 2001

The technique that could collect efficiently the hanji fibrous sludge from wastewater using surfactants was developed. When fibrous sludge of which concentration was about 80mg/L, was floated and collected, the optimum concentration of sodium oleate, the pore size of glass filter and the air flow rate were 10mg/L, $5-10{\mu}m$ and 200mL/min., respectively. The behavior of sodium oleate might be interfered by polyvalent cations such as $Ca^{2+}$. But when the concentration of $Ca^{2+}$ was less than 100mg/L, the interference effect did not appear. And when a typical cationic surfactant, cetyltrimethylammonium bromide(CTAB), was used, the collecting yield was less than that of sodium oleate, and the amount of foam was higher than sodium oleate. When 1mg/L of CTAB was added to the hanji sludge sample contained 1mg/L of $PAMID^{(R)}$, a dispersant, fibrous sludge was effectively coagulated, the flotation time was very short and the collecting yield was above 95%. But in the case, sodium oleate was inefficient.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.779-785
• /
• 1994

The interaction between the cationic dye, thionin(Th) and the anionic surfactant, sodium dodecyl sulfate (SDS) has been investigated by absorption spectra. As the temperature of surfactant solution was increased in premicellar range(S/D=10, 80, and 160) which was much lower than the critical micelle concentration(CMC), the increment or decrement of the molar extinction coeffecient ratio appeared. It was found that the most stable temperature range of the oligomer aggregate in Th-SDS system at S/D=160 was below $60^{\circ}C$. With increasing the concentration of inorganic salt and organic solvents in Th-SDS system, ${\alpha}$-band was increased, but ${\gamma}$=band or J-band was decreased. The orders of ${\alpha}$-band increasing power were $Cl^-$>$ClO{_4}{^-}$>$SO{_4}{^{2-}}$>$NO{_3}{^-}$ and 2-propanol>ethanol>methanol>ethylene glycol.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.41-50
• /
• 2001

The use of clay has been the favored method of reducing or eliminating hazardous contaminants in the leachate from landfills. But, neither natural clays nor organoclays modified with surfactants are able to effectively sorb both heavy metals and organic contaminants. Therefore, the objective of this study is to determine the optimal amount of surfactant added on the clay mineral to effectively remove both of them. For this purpose, Na-Bentonite as the natural clay, and hexadecyltrimethylammonium (HDTMA) as the cationic surfactant were used, Chlorobenzene and lead ($Pb^{2-}$) were selected as representative contaminants. Experimental result showed that chlorobenzene sorption increased with increasing HDTMA to bentonite, ratios. On the contrary, the removal rate of lead decreased as the amount of HDTMA increased. The removal of chlorobenzene was influenced by the amount of HDTMA added to the bentonites rather than initial concentration of chlorobenzene, but the removal of lead was much more influenced by the initial concentration of lead. The adsorption of lead was not affected by chlorobenzene, and vice versa. The competitive sorption between the heavy metal and the organic contaminant was not present.

• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.94-104
• /
• 2011

Mesoporous silica was synthesized in a water solvent and in an ethanol solvent with the non and cationic cetyltrimethyl ammonium chloride (CTAC) by varying the amount of the amphiphilic acrylic urethane oligomer (AAU) and the pH of the solution. The adsorption of the MX (3-chloro-4 (dichloromethyl)-5-hydroxy-2-(5H)-furanone) in drinking water was studied using the synthesized mesoporous silica as an adsorbent. The most appropriate silica was synthesized in acidic conditions in the water solvent and in alkali conditions in the ethanol solvent. The average pore sizes of the synthesized mesosilica were 3 nm and more. The mesoporous silica synthesized by the addition of the AAU oligomer showed excellent adsorption characteristics. With respect to the co-surfactant, the best adsorption characteristics were obtained when the P64,a non-ionic surfactant with a high molecular weight, was used to synthesize the silica than when other co-surfactants were used. The adsorption rate decreased as the MX concentration in the water increased. Different adsorption equilibrium conditions were reached depending on the adsorbate MX concentration in the adsorbent and the solution. It was seen that perfect adsorption does not occur due to such equilibrium conditions.

• Journal of the Korean Chemical Society
• /
• v.41 no.6
• /
• pp.284-291
• /
• 1997

The critical micelle concentrations($CMC^*$) of a cationic surfactant cetylpyridinium chloride (CPC) and a nonionic surfactant triton X-100(TX-100) in aqueous solutions of n-alcohols(methanol, ethanol, 1-propanol, 1-butanol and 1-pentanol) were determined by UV spectroscopic method at 25$^{\circ}C$. The various thermodynamic values in 0.1 M n-alcohols were calculated by means of the equation derived from the pseudo-phase separation model and compared with the values in the absence of n-alcohols. The results were a good agreement with the nonideal mixed micelle model, and they showed negative deviation from the ideal behavior.