• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.1
• /
• pp.39-45
• /
• 2014

Various approaches have been tried to reduce the emission of carbon dioxide in paper industry. One of important approaches is to use PCC manufactured from emission gas as a filler. However, it was recognized that PCC is inferior to other fillers in the paper strength properties of view. Therefore, pretreatment of PCC with pulp powder was tried to mitigate the strength reduction of paper. Pretreatment of PCC with pulp powder improved the bulk(7.4~12.9%) and air permeability(24.8~42.98%), but there is no significant change in opacity. Tensile index, burst index and stiffness were decreased by the use of pretreated PCC with pulp powder. Anionic and cationic PAM were used as a additive for PCC pretreatment in order to improve strength properties. There was no significant change in bulk in all kinds of PAM used in this study. Most strength properties were improved by the pretreatment of PCC with the anionic and cationic PAM and pulp powder, although the opacity and stiffness were more or less decreased.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.101-113
• /
• 2016

In this study, to improve the water flux of porous hydrophobic membranes, various water-soluble polymers including neutral, cationic and anionic polymers were adsorbed using 'salting-out' method. The adsorbed hydrophobic membrane surfaces were characterized mainly via the measurements of contact angles and scanning electron microscopy (SEM) images. To enhance the durability of the modified membranes, the water-soluble polymers such poly(vinyl alcohol) (PVA) were crosslinked with glutaraldehyde (GA) and found to be resistant for more than 2 months in vigorously stirred water. The water flux was much more increased when the ionic polymers used as the coating materials rather than the neutral polymer and in this case, about 70% of $0.31L/m^2{\cdot}h$ (LMH) to 0.50 LMH was increased when 300 mg/L of polyacrylamide (PAAm) was used as the coating agents. Among the cationic coating polymers such as poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA), poly(acrylic acid-comaleic acid) (PAM) and poly(acrylic acid) (PAA), PSSA_MA was found to be the best in terms of contact angle and water flux. In the case of PSSA_MA, the water flux was enhanced about 80%. The low concentration of the coating solution was better to hydrophilize while the high concentration inclined to block the pores on the membrane surfaces. The best coating condition was found: (1) coating concentration 150 to 300 mg/L, (2) ionic strength 0.15, (3) coating time 20 min.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.53-60
• /
• 2015

The effects of stirring speed during filler modification by dual polymers on flocculation and reflocculation of PCC (precipitated calcium carbonate) particles and its effect on handsheet properties were elucidated. PCC surface was modified by adsorbing A-PAM (anionic polyacrylamide) and C-starch (cationic starch) in series at various stirring speeds. It was found that increasing stirring speed during filler modification decreased the initial floc size of PCC. Continuous stirring with the same speed for filler modification resulted in the decrease of a floc size, eventually reached a steady state. The variations in a floc size was influenced by the stirring speed during filler modification: the lower the stirring speed during filler modification, the larger the floc size variations. Conclusively, the stability of PCC floc could be improved by increasing the stirring speed. In addition, the stirring speed influenced the handsheet properties. The smaller the PCC floc, the lower the strength of handseet. However, too much larger floc size also deteriorated paper strength. There exists an optimum floc size in term of paper strength which shall be controlled by stirring speed during filler modification.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.779-784
• /
• 1995

The effective production of 5'-GMP(5'-Guanylic acid) by immobilized 5'-GMP producing fusant RC102(intergeneric protoplast fusion between Brevibacterium ammoniagenes ATCC21263 and Corynebacterium glutamicum ATCC21171) was investigated. The Fusant RC102 was immobilized by entrapping in -carrageenan, agar, polyacrylamide or Ca-alginate. 3% k-carrageenan was selected as the most suitable matrix. In the production of 5'-GMP using the immobilized whole cells of fusant RC102, the optimum conditions were $32^{\circ}C$, pH 8.0, $30\mu\textrm{g}/L\;of\;Mn^{2+},\;1{\times}10^{-6}%\;of\;Zn^{2+}$. In order to use fermentation medium containing CSL(Corn Steep Liquor) plentiful in $Mn^{2+}$, the optimum conditions of penicillin G, D-cycloserine and POESA(polyoxyethylene stearylamine) for production of 5'-GMP were 0.8unit/ml, 0.8unit/ml, 0.8unit/ml and 5mg/ml, respectively. Cationic surfactant, POESA was effective and superior to the antibiotics, penicillin G or D-cyloserine in 5'-GMP productivity. The condinuous fermentation using immobilized fusant RC102 showed that 5'-GMP productivity was stable for more than 15 days.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.43-49
• /
• 2012

In this work, the non-ionic polyethylene oxide(PEO)/phenolic formaldehyde resin(PFR) retention system, which was less affected by furnish charge, was analyzed for possibility and effectiveness when using recycled stock. When the micropolymer was added at the PEO/PFR retention system and the PAM/bentonite retention system, performance of retention and drainage was improved. When the cationic micropolymer was added on the PEO/PFR retention system, the highest retention was achieved. The Polyacrylamide(PAM)/bentonite system induced flocculation of white pitch by electrostatic flocculation. On the other hand, the non-ionic PEO/PFR retention system induced less flocculation of white pitch than the PAM/bentonite retention system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.51-60
• /
• 2014

To find a practical application approach of polyelectrolyte multilayering (PEM) on inorganic filler, we introduced PEM process without washing step and investigated the effect of shear condition on the washless PEM treatment of ground calcium carbonate (GCC). Washless multilayering on GCC was conducted under various shear conditions such as stirring, homogenization, and ultrasonication. Highly charged polyelectrolytes combination of polydiallyldimethylammonium chloride (PDADMAC) and poly sodium 4-styrene sulfonate (PSS) and low charged polyelectrolytes combination with cationic starch and anionic polyacrylamide (PAM) were compared. In the case of highly charged polyelectrolytes combination, shear conditions did not affect the zeta potential and the particle size of treated GCC. However, the modified GCC particles with low charged polyelectrolytes were more dispersed under higher shear condition while maintaining the zeta potential. In addition, GCC was successfully modified through laboratory inline washless polyelectrolyte multilayering system which consists of homogenizers and pumps.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.5
• /
• pp.312-317
• /
• 1985

${\beta}$-Glucuronidase (EC 3.2.1.31) which hydrolizes D-glucuronate from ${\beta}$-D-glucuronide was purified from rat liver, using ammonium sulfate fractionation, DEAE-cellulose chromatography, Concanavalin-A Sepharose 4B chromatography and gel filtration on Sephadex G-200. This enzyme has the molecular weight of 280,000 daltons by gel filtration and 75,000 daltons by SDS-polyacrylamide gel electrophoresis. As its funtion is reverse of detoxification in the liver, the inhibition of the enzyme was tested with extracts of several food products and medicinal herbs, some are known as anti-cancer agents. Among them, Panax ginseng and Cortnellus shiiake inhibited the enzyme competitively and the $K_1$ values were $9.22 {\times}\;10^{-2}$ and 0.102 mg/ml, respectively. These inhibitors strongly bound to DEAE-cellulose. The negatively charged amino acids, L-aspartate and L-glutamate, inhibited the enzyme, and $K_1$ value of L-aspartate was 0.80 mM. The interaction between ${\beta}$-glucuronidase and p-nitrophenyl-${\beta}$-D-glucuronide was found to involve ionic forces by the effect of ionic strength on the kinetic constant, Vmax/Km. It was inferred from these findings that cationic group at the active center of the enzyme is probably involved in attacking the substrate.

• Journal of Life Science
• /
• v.27 no.8
• /
• pp.930-936
• /
• 2017

The flocculating properties of bioflocculant Biopol32 produced by Pseudomonas sp. GP32 were investigated for application in industrial wastewater treatment. The major flocculating substance of bioflocculant Biopol32 was identified as polysaccharide. Many anionic flocculants need a counter ion to induce higher flocculating activity. The flocculating activity of bioflocculant Biopol32 was markedly increased by the addition of cationic ions ($Ca^{2+}$, $Al^{3+}$). The flocculating activity of bioflocculant Biopol32 was the most effective when 7.0 mM $CaCl_2{\cdot}2H_2O$ as coflocculant was added. The flocculating activity on the effect of pH and the temperature of the bioflocculant Biopol32 was compared with anionic commercial flocculant (polyacrylamide) and bioflocculant (zooglan from Zoogloea ramigera). In kaolin suspension, the highest flocculating activity was obtained at the bioflocculant Biopol32 concentration of 1.5 mg/l. A high flocculating activity was observed in the pH range of 5.0 to 8.0. The flocculating activity of bioflocculant Biopol32 was sustained up to $60^{\circ}C$, but decreased rapidly at over $70^{\circ}C$. In the batch culture, the charge density of bioflocculant Biopol32 was compared with flocculating activity. The larger the anionic charge density and apparent viscosity of bioflocculant Biopol32, the higher the flocculating activity. Therefore, we confirmed that the flocculating activity and apparent viscosity of bioflocculant Biopol32 was closely related to the charge density of bioflocculant Biopol32.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.753-770
• /
• 2017

The coagulation or flocculation of cohesive clay suspensions is one of the most widely used treatment technologies for contaminated water. Flocculated clay can transport pollutants and nutrients in ground water. Coagulants are used to accelerate these mechanisms. However, existing coagulants (e.g., polyacrylamide, polyaluminum chloride) are known to have harmful effects in the environment and on human health. As an alternative, eco-friendly coagulant, this study suggests ${\varepsilon}-polylysine$, a cationic biopolymer fermented by Streptomyces. A series of sedimentation experiments for various ${\varepsilon}-polylysine$ concentrations were performed, and the efficiency of sedimentation with ${\varepsilon}-polylysine$ was estimated by microscopic observation and light absorbance measurements. Two types of sedimentation were observed in the experiments: accumulation sedimentation (at 0.15%, 0.20%, 0.25% ${\varepsilon}-polylysine$) and flocculation sedimentation (at 0%, 0.1%, 0.5%, 1.0%, 2.0% ${\varepsilon}-polylysine$). These sedimentation types occur as a result of the concentration of counter ions. Additionally, the performance of ${\varepsilon}-polylysine$ was compared with that of a previously used environmentally friendly coagulant, chitosan. The obtained results indicate that flocculation sedimentation is appropriate for contamination removal and that ${\varepsilon}-polylysine$ functions more efficiently for clay removal than chitosan. From the experiments and analysis, this paper finds that polylysine is an alternative eco-friendly coagulant for removing chemical contaminants in groundwater.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7409-7414
• /
• 2015

Loop-mediated isothermal amplification (LAMP) developed by Notomi et al. (2000) has made it possible to amplify DNA with high specificity, efficiency and rapidity under isothermal conditions. The ultimate products of LAMP are stem-loop structures with several inverted repeats of the target sequence and cauliflower-like patterns with multiple loops shaped by annealing between every other inverted repeats of the amplified target in the similar strand. Because the amplification process in LAMP is achieved by using four to six distinct primers, it is expected to amplify the target region with high selectivity. However, evaluation of reaction accuracy or quantitative inspection make it necessary to append other procedures to scrutinize the amplified products. Hitherto, various techniques such as turbidity assessment in the reaction vessel, post-reaction agarose gel electrophoresis, use of intercalating fluorescent dyes, real-time turbidimetry, addition of cationic polymers to the reaction mixture, polyacrylamide gel-based microchambers, lateral flow dipsticks, fluorescence resonance energy transfer (FRET), enzyme-linked immunosorbent assays and nanoparticle-based colorimetric tests have been utilized for this purpose. In this paper, we reviewed the best-known techniques for evaluation of LAMP amplicons and their applications in molecular biology beside their advantages and deficiencies. Regarding the properties of each technique, the development of innovative prompt, cost-effective and precise molecular detection methods for application in the broad field of cancer research may be feasible.