• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.49-58
• /
• 2011

The maximum drying shrinkage velocity was proposed to verify bulk and stiffness improvement mechanism during drying according to papermaking parameters. It was based on the wet-web shrinkage behavior without the restraint of wet-web during drying, so intact drying impact could be measured. Bulking agent reduced the drying shrinkage and the maximum drying shrinkage velocity, so paper bulk increased and paper strength decreased. When adding cationic starch to stock with the bulking agent for strengthening, the bulk was increased further with additional decreasing of the drying shrinkage and the maximum drying shrinkage velocity. Paper strength also increased except tensile stiffness index with decreasing the drying shrinkage and the maximum drying shrinkage velocity. When using additional strength additives for strengthening of fiber interfaces extended by bulking agent and cationic starch, amphoteric strength additive increased paper stiffness without loss of paper bulk. It was considered that the added amphoteric strength additives were cross-linked to the stretched cationic starch and this cross-linking increased elasticity of fiber-polymer-fiber interfaces without changing the drying behavior. Paper bulk could be increased with decreasing the maximum drying shrinkage velocity. The drying shrinkage of paper also could be controlled by fiber-to-fiber bonding interfaces by the bulking agent. In this case, paper strength including stiffness was decreased by reducing fiber-to-fiber bonding but it could be improved by strengthening fiber-to-fiber interfaces with polymer complex without loss of bulk.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.34-37
• /
• 2000

The effect of novel N-crotyl-N,N-dimethyl-4-methylanilinium hexafluroantimonate (CMH) curing agent on cure behavior and thermal properties of DGEBA epoxy cationic system was investigated. From DSC measurements of DGEBA/CMH system, it was shown that this system exhibits an excellent thermal latent characteristic in a given temperature and reveals complex cure behavior as indicated by multiple exotherms. The conversion and conversion rate of DGEBA/CMH system increased with increasing the concentration of initiator due to high activity of CMH. Viscoelastic properties during gel formation of DGEBA with CMH were investigated by rheological techniques under isothermal condition. The gel time obtained from the modulus crossover. point t(G')=G", was affected by high curing temperature and concentration of CMH, resulting in high degree of network formation in cationic polymerization. The thermal stabilities were discussed in terms of the activation energy for decomposition and thermal factors determined from TGA measurements.ents.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.298-303
• /
• 2011

Aramid fibers have been widely used as the reinforcement for composites due to their high modulus and strength. Nowadays the safety measures is required to improve the personal protection. The dyeing of aramid fibers is considered to be very difficult and their dyeing mechanism is not well illucidated. Therefore, this study is to establish the dyeing & printing technology for aramid fibers. The effects of swelling agent and neutral salt in the dye bath on the obtained colors were studied. Also dyeing method of aramid fibers depending on dyeing temperature and dye concentration were established. Color fastness of the dyed aramid fabric with cationic dyes were acceptable excluding light fastness.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.168-176
• /
• 2001

The effect of novel N-crotyl-N,N-dimethyl-4-methylanilinium hexafluoroantimonate (CMH) curing agent as a thermal latent initiator on thermal behaviors, rheological properties, and thermal stability of diglycidylether of bisphenol A (DGEBA) epoxy cationic system was investigated. From DSC measurements of DGEBA/CMH system, it was shown that this system exhibits an excellent thermal latent characteristic at a given temperature. The conversion and conversion rate of DGEBA/CMH system increased with increasing the concentration of initiator, due to high activity of CMH. Rheological properties of the system were investigated under isothermal condition using a rheometer The gelation time was obtained from the analysis of storage modulus (G'), loss modulus (G"), and damping factor (tan $\delta$). As a result, the reduction of gelation time was affected by high curing temperature and concentration of CMH, resulting in high degree of network formation in cationic polymerization, due to difference of activity. The thermal stability of the cured epoxy resin was discussed in terms of the activation energy for decomposition and thermal factors determined from TGA measurements.ents.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.130-131
• /
• 2016

Although many metals contaminated sediment from coastal area contain both anionic and cationic heavy metals, the current remediation technologies are not effective for stabilize heavy metals of both anionic and cationic elements from contaminated coastal region. the present work investigated the efficiency and mechanism of immobilization of Fe, Zn, Cr, Cu, Pb and Cd metal solutions in modified zeolite based biostimulant ball. Biostimulant ball containing acetate, nitrate and sulphate which are enhance the activity of marine microorganisms and it can act as electron donors and electron acceptors. Modified zeolite and chelating agent is greatly enhance the metal stabilization due to increased immobility of the analysed metals. The XRD, FT-IR and SEM of modified zeolite which cheating agents containing heavy metals were investigated. The results indicated that heavy metals could be effectively immobilized in modified zeolite and chelating agents in BSB added sediment. The immobilization of heavy metals in modified zeolite and chelating agents along with BSB could be due to stabilize of heavy metal cations. Immobilization of heavy metals using BSB with modified zeolite and chelating agent has lower cost effect and enhance the sediment quality.

• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.46-53
• /
• 1994

Polymer cationic agent was prepared by the initial polymerisation of epichlorohydrin followed by amination with diethylamine. Cotton fibre treated with the polymer (6~8% o.w.f.) is highly cationic and exhibit increased substantivity for reactive dyes under neutral to weakly acid conditions. The modified substrate could be dyed with reactive dyes without salt or a little salt from dye bath. The increased concentration of cationic agents resulted in an increase the colour yield. Futhermore, treated cotton has an electropositive surface charge. Adsorption of Reactive dye can be attributed to both van der waals force and electrostatic attraction.

• YAKHAK HOEJI
• /
• v.11 no.3_4
• /
• pp.17-21
• /
• 1967

At present, quarternary ammonium salts(cationic surfactant) and Tego compounds (amphoteric surfactant) are used as germicidal agent. In this paper, it was investigated whether their germicidal activities are influenced or not by some suspending agents which are added to them 0.005% benzalkonium chloride aq. solution and 0.05% dodecyl diaminoethyl glycine aq. solution sterilized respectively against Staphylococcus aureus and Escherichia coli within a minute. The solutions aded acacia, carboxymethyl cellulose, sodium alginate solutions to make to 0.005% to above surfactants solution decreased the germicidal activity, not being sterilized bacteria for more than 2 hours however, the solutions decreased the germicidal activity by addition of suspending agents such as acacia, carboxymethyl cellose, sodium alginate and bacteria were survival for more than 2 hrs, 0.05% of benzalkonium chloride and 0.1% dodecyl diaminoethyl glycine respectively would be sterilized within 10 minutes, when added to 5% suspending agents. This result show that bactericidal action of dodecyl diaminoethyl glycine is affected by suspending agents less than that of benzalkonium chloride.

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.41-50
• /
• 2009

Design of experiments (DoE) concept was successfully applied to determine the optimum processing conditions that yield maximum % exhaustion for berberine interaction with synthetic tanning agent pretreated polyamide substrates. The potential of synthetic tanning agent to provide anionic sites on the polyamide for berberine interaction which is cationic in nature was tested to increase the % exhaustion of berberine in this article. Experiments were designed according to Central Composite Rotatable Design (CCRD). The three factors for synthetic tanning agent pretreatment and two factors for berberine interaction each at five different levels, including central and axial points were considered. Experiments were conducted in a laboratory scale infra-red treatment instrument according to CCRD. For each response, second order polynomial models were developed using multiple linear regression analysis incorporating linear, interactions and squared effects of all variables and then optimized. The significance of the mathematical model developed was ascertained using Excel regression (solver) analysis module. Analysis of variance (ANOVA) was performed to check the adequacy and accuracy of the fitted models. The response surfaces and contour maps showing the interaction of process variables were constructed. Applying Monte Carlo simulation, response surface and contour plots, optimum operating conditions were found and at this optimum point, % exhaustion of 81% and 74% respectively for synthetic tanning agent pretreatment and berberine interaction were observed and subsequently the results were experimentally investigated.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.154-160
• /
• 1995

Dyeing behavior of Silk/Cationic dyeable polyester(CDP) mixed filament was investigated by using a cationic dye. The effect of pH, temperature and additives such as carrier, levelling agent and salt were examined for each silk and CDP component of mixed filament in order to find out the optimum dyeing condition. Based on these results, the dyeing behavior was investigated for Silk/CDP mixed filaments concering various dyeing parameters. The dye adsorption was significantly changed on the dyeing temperature, carrier addition and pH of the dyebath. Specially, the dye migration phynomena were observed for a mixed filament, showing that the dyes initially observed on the surface of silk fiber migrate to the CDP component during a dyeing process. The dyeing of Silk/CDP mixed filaments accompanied by dye migration and as a result, dye adsorption can be developed only for a CDP component. Therefore, the control of dyeing temperature is most important for a Silk/CDP mixed filament, in order that both silk and CDP component are able to be dyed by a cationic dye simultaneously in one bath/one dye system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.1-12
• /
• 2002

Starch dissolved in paper-mill wastes, either as a result of poor retention on the paper web or recycling of surface-treated broke, was a major pollutant Laboratory tests were performed by using different kinds of starch as a surface treatment. It was concluded that the use of cationic starch can positively affect the level of starch dissolved in liquid effluents. When cationically modified starches were used for surface sizing, the starch was tightly bound to the paper fibers, it was not removed during the repulping of broke. The result of mill trial in fine paper manufacture for the application of low-viscosity cationic starches used in size press reduced COD load in the effluents and increased One Pass Retention. It had been found that when cationic starch used as a surface sizing agent, more starch was retained on or near the surface of the sheet than with conventional oxidized starches. Thus surface strengths and quality were improved. In addition it is possible to maintain the desired level of starch penetration into the fiber net and improve porosity, opacity and brightness. In contrast, in most cases, dusting problems are notably eliminated. Cationic surface sized starch improved black and color ink-jet print quality in terms of feathering and optical density of the print image. These improved properties were believed to be due to a combination of fiber bonding and surface orientation more uniform starch concentration on the paper surface was resulted. Moreover cationic charges in the paper surface lend themselves excellently to fix ink jet ink anionic in nature.