• Journal of Environmental Science International
• /
• v.29 no.12
• /
• pp.1171-1184
• /
• 2020

The green synthesis of inorganic nanoparticles (NPs) using biomaterials has garnered considerable attention in recent years because of its eco-friendly, non-toxic, simple, and low-cost nature. In this study, we synthesized NPs of noble metals, such as Ag and Au using an aqueous extract of a marine seaweed, Ecklonia cava. The formation of AgNPs and AuNPs was confirmed by the presence of surface plasmon resonance peaks in UV-Vis absorption spectra at approximately 430 and 530 nm, respectively. Various properties of the NPs were evaluated using characterization techniques, such as dynamic light scattering, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. Phytochemicals in the seaweed extract, such as phlorotannins, acted as both reducing and stabilizing agents for the growth of the NPs. The green-synthesized AgNPs and AuNPs were found to exhibit high catalytic activity for the decomposition of organic dyes, including azo dyes, methylene blue, rhodamine B, and methyl orange.

• Corrosion Science and Technology
• /
• v.21 no.5
• /
• pp.412-417
• /
• 2022

Proton exchange membrane fuel cells (PEMFCs) provide zero emission power sources for electric vehicles and portable electronic devices. Although significant progresses for the widespread application of electrochemical energy technology have been achieved, some drawbacks such as catalytic activity, durability, and high cost of catalysts still remain. Pt-based catalysts are regarded as the most efficient catalysts for sluggish kinetics of oxygen reduction reaction (ORR). However, their prohibitive cost limits the commercialization of PEMFCs. Therefore, we proposed a NiCo@Au core shell structure as Pt-free ORR electrocatalyst in PEMFCs. NiCo alloy was synthesized as core to introduce ionization tendency and autoxidation reaction. Au as a shell was synthesized to prevent oxidation of core NiCo and increase catalytic activity for ORR. Herein, we report the synthesis, characterization, electrochemical properties, and PEMFCs performance of the novel NiCo@Au core-shell as a catalyst for ORR in PEMFCs application. Based on results of this study, possible mechanism for catalytic of autoxidation core@anti-oxidation shell in PEMFCs is suggested.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.379-385
• /
• 2011

One of main catalysts for De-NOx in SCR is a $V_2O_5/TiO_2$, and this work formulated powdery catalysts focusing ultimately on corrugate catalytic support. The prepared catalyst consisted of anatase $TiO_2$. Amount of the added vanadium oxide determined the viscosity of catalyst slurry, which is important for washcoat for a final corrugate type catalytic reactor. The test showed a proportional relation between adsorption amount of ammonia and specific surface area. De-NOx efficiency could be obtained up to 96.3 % at $400^{\circ}C$ with a spacial velocity of $4,000hr^{-1}$.

• BMB Reports
• /
• v.33 no.1
• /
• pp.82-88
• /
• 2000

A homologous gene to alanine racemase was cloned from a hyperthermophilic bacterium, Aquifex pyrophilus. The cloned gene encodes a protein of 341 amino acids, which has a significant homology to alanine racemase of Bacillus stearothermophilus, Lactobacillus brevis, and E. coli. When the gene was expressed in Escherichia coli, it produced a 40 kDa protein. The purified protein contains one mole pyridoxal 5-phosphate per one mole of protein, which is essential for catalytic activity of alanine racemase. The purified protein catalyzed racemization of L-alanine to D-alanine, or vice versa, indicating that the cloned gene encoded alanine racemase. It also showed significant racemization activity against L-serine and ${\alpha}-aminobutylic$ acid. The A. pyrophilus alanine racemase showed strong thermostability, and it maintained catalytic activity in the presence of organic solvents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.611-611
• /
• 2013

In this study, iron oxide nanoclusters layer (Nc) was prepared onto functionalized silicon substrate by wet method. The amine-terminated SAM fabricated on silicon substrate (APTMS/Si) was carried out by UV-treatment and immersed into the FeCl3/HCl aqueous solution. Then, Nc were immobilized onto oxidized SAM silicon substrate (SAMs/Si) through electrostatic interaction between cationic Nc and anionic SAMs/Si. This catalytic layer (Nc/SAMs/Si) was used to grow carbon nanotubes (CNTs). The characterization results clearly show that the well-graphitized CNTs were synthesized by using functionalized silicon substrate as a template having appropriate density of catalyst. These consequences show that SAM containing template is important to achieve the effective layer of catalyst to synthesize CNTs.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.7
• /
• pp.954-958
• /
• 2014

Succinic semialdehyde dehydrogenase (SSADH) catalyzes the oxidation of succinic semialdehyde (SSA) into succinic acid in the final step of ${\gamma}$-aminobutyric acid degradation. Here, we characterized Bacillus subtilis SSADH (BsSSADH) regarding its cofactor discrimination and substrate inhibition. BsSSADH showed similar values of the catalytic efficiency ($k_{ca}t/K_m$) in both $NAD^+$ and $NADP^+$ as cofactors, and exhibited complete uncompetitive substrate inhibition at higher SSA concentrations. Further analyses of the sequence alignment and homology modeling indicated that the residues of catalytic and cofactor-binding sites in other SSADHs were highly conserved in BsSSADH.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1091-1097
• /
• 2014

Tageteserecta flower like zinc oxide nanostructures composed of hexagonal nanorods were synthesized via sonochemical method at room temperature. The synthesized nanomaterials exhibited wurtzite hexagonal phase structure with the single crystalline nature. The diameter of the individual nanorods that constitute the flower shaped zinc oxide structures is in the range of 120-160 nm. The sonication time effectively determined the morphological properties of the prepared materials. The catalytic activity of prepared zinc oxide nanostructures towards N-formylation reactions were evaluated without any surface modification and the nanostructures exhibited good reaction yield with the prompt recyclability behavior.

• Journal of the Korean Magnetic Resonance Society
• /
• v.22 no.4
• /
• pp.144-148
• /
• 2018

Catalytic enzyme Pyrazinamidase (PncA) from Mycobacterium tuberculosis can hydrolyze substrate pyrazinamide (PZA) to pyrazoic acid (POA) as active form of compound. Using NMR spectroscopy, pH-dependent catalytic properties were monitored including metal binding mode during converting PZA to POA. There seems to be a conformational change through zinc binding in active site from the perturbation of peak intensities in series of 2D HSQC spectra the conformation changes through zinc binding.

• Korean Journal of Microbiology
• /
• v.43 no.1
• /
• pp.19-22
• /
• 2007

Acetohydroxyacid synthase (E.C.2.2.1.6., AHAS) is the enzyme that catalyses the first step in the synthesis of the branched-chain amino acids valine, leucine and isoleucine. The AHAS gene (TIGR access code HI2585) from Heamophilus influenzae was cloned into the bacterial expression vector pET-28a and expressed in the Escherichia coli strain BL21(DE3). The expressed enzyme was purified by $Ni^{2+}-charged$ HiTrap chelating HP column. The purified enzyme appears as a single band on SDS-PAGE with a molecular mass of about 63.9 kDa. The enzyme exhibits absolute dependence on the three cofactors FAD, $MgCl_{2}$ and thiamine diphosphate for activity. Specific activity of purified enzyme has 3.22 unit/mg and optimum activity in the pH 7.5 at $37^{\circ}C$. This enzyme activity has an effect on the buffer. When comparing the enzyme activity against the organic solvent, it followed in type and the difference it is but even from the aqueous solution where the organic solvent is included with the fact that the enzyme activity is maintained.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.859-869
• /
• 2005

The commercial $V_2O_5-WO_3/TiO_2$ catalysts which had been exposed to the off gas from incinerator for a long time were regenerated by physical and chemical treatment. The catalytic properties and NOx conversion reactivity of those catalysts were examined by analysis equipment and NOx conversion experiment. The characterization of the catalysts were performed by XRD(x-ray diffractometer), BET, POROSIMETER, EDX(energy dispersive x-ray spectrometer), ICP(inductively coupled plasma), TGA(thermogravimetric analyzer) and SEM (scanning electron microscopy). NOx conversion experiment were performed with simulated off gas of the incinerator and $NH_3$ was used as a reductant of SCR reaction. Among the regeneration treatment methods which were applied to regenerate the aged catalysts in this study, it showed that the heat treatment method had excellent regeneration effect on the catalytic performance for NOx conversion. The catalytic performance of the regenerated catalysts with heat treatment method were recovered over than 95% of that of fresh catalyst. For the regenerated catalysts with the acid solution(pH 5) and the alkali solution(pH 12), the catalytic performance were recovered over than 90% of that of fresh catalyst. From the characterization results of the regenerated catalysts, the specific surface area was recovered in the range of $85{\sim}95%$ of that of fresh catalyst. S and Ca element, which are well known as the deactivation materials for the SCR catalysts, accumulated on the aged catalyst surface were removed up to maximum 99%. Among the P, Cr, Zn and Pb elements accumulated on the aged catalyst surface, P, Cr and Zn element were removed up to 95%. But the Pb element were removed in the range of $10{\sim}30%$ of that of fresh catalyst.