• Journal of Korea Water Resources Association
• /
• v.43 no.12
• /
• pp.1011-1027
• /
• 2010

In hydrologic modeling, prediction uncertainty generally stems from various uncertainty sources associated with model structure, data, and parameters, etc. This study aims to assess the parameter uncertainty effect on hydrologic prediction results. For this objective, a distributed rainfall-sediment yield-runoff model, which consists of rainfall-runoff module for simulation of surface and subsurface flows and sediment yield module based on unit stream power theory, was applied to the mesoscale mountainous area (Cheoncheon catchment; 289.9 $km^2$). For parameter uncertainty evaluation, the model was calibrated by a multi-objective optimization algorithm (MOSCEM) with two different objective functions (RMSE and HMLE) and Pareto optimal solutions of each case were then estimated. In Case I, the rainfall-runoff module was calibrated to investigate the effect of parameter uncertainty on hydrograph reproduction whereas in Case II, sediment yield module was calibrated to show the propagation of parameter uncertainty into sedigraph estimation. Additionally, in Case III, all parameters of both modules were simultaneously calibrated in order to take account of prediction uncertainty in rainfall-sediment yield-runoff modeling. The results showed that hydrograph prediction uncertainty of Case I was observed over the low-flow periods while the sedigraph of high-flow periods was sensitive to uncertainty of the sediment yield module parameters in Case II. In Case III, prediction uncertainty ranges of both hydrograph and sedigraph were larger than the other cases. Furthermore, prediction uncertainty in terms of spatial distribution of erosion and deposition drastically varied with the applied model parameters for all cases.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.924-928
• /
• 2018

The objective of this study is to solve a problem that is occurred during the spline machining of tubular shaft yoke in both side IMS module. In order to simulate the problem, the movement direction of upper die was set as standard case and error case. The material of tubular shaft yoke was set to S20C as refer to the analysis library. The movement directions of upper die were separated with standard case and error case. The error case was set to simulate the problem in the spline machining of tubular shaft yoke. In order to solve the problem, the outer radius of upper die were modelled from 9.40mm to 9.44mm. The simulation results were analyzed and compared in terms of effective stress, metal flow line and folding phenomena characteristics. In case of the outer radius of upper die was 9.42mm, it was observed a relatively uniform effective stress distribution and had a straight metal flow line.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.9-10
• /
• 2007

In this paper, we investigated the effect of solar cell breakage on maximum output power of PV module. The test result using artificial light source didn't give any change in output power in case of crack near electrical ribbon. Also, there was a reduction in output power in case of increasing of crack area far from electrical ribbon. But, this experiment is under artificial light source test method. So, when such a PV module is outdoor for a long time, there would be problems on electrical output power and durability because of thermal aging phenomenon of solar cell breakage.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.33-43
• /
• 2010

In this paper, we propose a floral scent recognition using odor sensors and a odor display using odor distribution system. Proposed odor recognition has method of correlation coefficient between sensors that select optimal sensors in floral scent recognition system of selective multi-sensors. Proposed floral scent recognition system consists of four module such as floral scent acquisition module, optimal sensor decision module, entropy-based floral scent detection module, and floral scent recognition module. Odor distribution system consists of generation module of distribution information, control module of distribution, output module of distribution. We applied to floral scent recognition for performance evaluation of proposed sensors decision method. As a result, application of proposed method with floral scent recognition obtained recognition rate of 95.67% case of using 16 sensors while applied floral scent recognition system of proposed sensor decision method confirmed recognition rate of 96% using only 8 sensors. Also, we applied to odor display of proposed method and obtained 3.18 thorough MOS experimentation.

• KIEAE Journal
• /
• v.17 no.4
• /
• pp.95-100
• /
• 2017

Purpose: Now a day, Most of the residential house in Korea consists of apartment buildings. However, in the case of old apartment buildings, dwelling environment condition depends on management effort by residents. But we can't rebuild or restructure only old single dwelling unit in apartment buildings. And we can't move every single dwelling unit in the apartment building. Therefore, this study suggests a prototype of combinable container dwelling module apartment. Method: The method of research is exploring the case of previously constructed containers. Based on the case, This study suggests prototypes to create a variable apartment design with dwelling container units. Based on the prototype, various combinations are proposed to produce various types of dwelling space. Finally, this study makes an example plan for the apartment by using the container unit modules. Results: This study suggests combinable container apartment building prototypes. And it may be a fundamental study of changing the apartment building concept.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.500-502
• /
• 2007

In case Power Line Communication (PLC) method is applied to a rainwater monitoring system, PLC module should be utilized. In this paper, PLC module using ST7538Q is implemented. The design rules of the IC peripheral circuit are explained in detail. The operation of the implemented PLC module is verified through the experimental results.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3053-3058
• /
• 2008

We develop a heat exchanger modules for a multi-burner boiler. The heat exchanger module is kind of a heat recovery steam generator (HRSG). This heat recovery system has 4 heat exchanger modules. The 1st module consists of 27 bare tubes due to high temperature exhaust gas and the others consist of 27 finned tubes. The maximum steam pressure of each module is 1 MPa and tested steam pressure is 0.7 MPa. In order to test these heat exchanger modules, we make a 0.5t/h flue tube boiler (LNG, $40\;Nm^3/h$). We tested the heat exchanger module with changing the position of each heat exchanger module. We measured the inlet and outlet temperature of each heat exchanger module and calculated the heat exchange rate. The results show that if module C is placed at second stage (the 1st stage is always module O, bare tube module), there is no need to attach an additional heat exchanger module. In this case the exit temperature of module C is low enough to enter an economizer which is more effective in heat recovery than a heat exchanger module.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1009-1016
• /
• 2002

We design and implement a new case-based recommender system using implicit rating information for a digital content site. Our system consists of the User Profile Generation module, the Similarity Evaluation and Recommendation module, and the Personalized Mailing module. In the User Profile Generation Module, we define intra-attribute and inter-attribute weight deriver from own's past interests of a user stored in the access logs to extract individual preferences for a content. A new similarity function is presented in the Similarity Evaluation and Recommendation Module to estimate similarities between new items set and the user profile. The Personalized Mailing Module sends individual recommended mails that are transformed into platform-independent XML document format to users. To verify the efficiency of our system, we have performed experimental comparisons between the proposed model and the collaborative filtering technique by mean absolute error (MAE) and receiver operating characteristic (ROC) values. The results show that the proposed model is more efficient than the traditional collaborative filtering technique.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.427-431
• /
• 2020

In this Study, as the structure of IT module for smart phone display becomes thin to catch up with slim product trend, the reliability of display module is on the rise as a issue for product design. Especially, almost part of cellular phone should undergo thermal dissipation test. thus many manufacturers have considered design guide line using CAE and simulation for more effective usage of limited resources on the market. This test simulates the case when cellular phone slips through user's fingers while he is talking on the phone. This paper studies a thermal simulation of display module in smart phone. This design for reliability improvements are suggested on the basis of the results of FVM Analysis and display of IT module and smart phone design.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.3
• /
• pp.209-215
• /
• 2006

This paper was proposed Intelligent and wireless USN/RFID module system that can overcome disadvantage of existing RFID system with no sensing module and wire communication. The proposed USN/RFID system was designed and fabricated. After fabricating new system, we analyzed the characteristics of USN/RFID module. After design VCO block that is point circuit to develop next generation system one chip of RFID system, we were carried out simulation and verified the validity. this paper was showed that VCO system was enough usable in wireless network module. USN/RFID Reader module shows superior result that validity awareness distance corresponds to 30 M in the case of USN and to 5 M in RFID Reader's case and 900 MHz of commercial frequency does practical use enoughly in range of high frequency. The USN/RFID Reader module is considered to act big role to Ubiqitous industry offering computing surrounding of new concept that is intelligence type service and that was associated to real time location system(RTLS), environment improvement/supervision, national defense, traffic administration etc.