• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.895-908
• /
• 2018

As modern science is developed and advanced, examination and number of times using radiation are increasing daily. General diagnostic X-ray generator is installed on stationary form, But X-ray generator was developed because patient who is in the intensive care unit, operation room, emergency room can not move to general x-ray room. What we examine patient by x-ray generator is certainly necessary, So patient exposure is inevitable. but reducing radiation exposure is highly important matter about radiation technology, guardian, patient in the same hospital room, nurse etc. For this reason, rule regarding safety control of diagnostic x-ray generator revised for radiation worker, patient and protector proclaim that mobile diagnostic x-ray shield must placed in case of examine different location excluding operation room, emergency room, intensive care unit. But, radiogical technologist is having a lot of difficulties to examine with mobile x-ray generator, diagnostic x-ray shield partition, image plate and lead apron. So, when we use x-ray generator, we manufacture shield tools can be attached to the mobile x-ray generator On behalf of x-ray shield partition and conduct analysis and in comparison to part of body and distribution of dose rate and find way to reduce radiation exposure through distribution of dose rate of patient within the radiogical technologist, medical team. Mobile x-ray generator aimed at SHIMADZU inc. R-20, We manufactured equipment for shielding x-ray scattered x-ray by installing shielding wall from side to side based on support beam on the mobile x-ray generator. Shielding wall when moving can be folded and designed to expand when examine. Experiment measured five times in each by an angle for dose rate of eyes, thyroid, breast, abdomen and gonad on exposure condition of upper and lower extremity, chest, abdomen which is examined many times by mobile x-ray generator. We used dosimeter RSM-100 made by IJRAD and measured a horizontal dose rate by body part. The result of an experiment, shielding decreasing rate of the front and the rear showed 77 ~ 98.7%. Therefore using self-production shielding wall reduce scattered x-ray occurrence rate and confirm can decrease exposure dose consequently. Therefore, through this study, reduction result which is used shielding wall of self-production will be a role of shielding optimization and it could be answer about reduction of medical exposure recommended by ICRP 103.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.233-245
• /
• 2021

Many studies on the microstructures in rocks have been conducted using experimental methods with various equipment as well as natural rock studies to see the development of microstructures and understand their mechanisms. Grain boundary migration of mineral aggregates in rocks could cause grain growth or grain size changes during metamorphism or deformation as one of the main recrystallization mechanisms. This study suggests improved ways regarding the analog material experiments with reformed equipment to see sequential observations of these grain boundary migration. It can be more efficient than the existing techniques and carry out an appropriate microstructure analysis. This reformed equipment was implemented to enable optical manipulation by mounting polarizing plates capable of rotating operation on a stereoscopic microscope and a deformation rig capable of experimenting with analog materials. The equipment can automatically control the temperature and strain rate of the deformation rig by microcontrollers and programming and can take digital photomicrographs with constant time intervals during the experiment to observe any microstructure changes. The composite images synthesized using images by rotated polarizing plates enable us to see more accurate grain boundaries. As a rock analog material, norcamphor(C7H10O) was used, which has similar birefringence to quartz. Static grain growth and simple shear deformation experiments were performed using the norcamphor to verify the effectiveness of the equipment. The static grain growth experiments showed the characteristics of typical grain growth behavior. The number of grains decreases and the average grain size increases over time. These case experiments also showed a clear difference between the growth curves with three temperature conditions. The result of the simple shear deformation experiment under the medium temperature-low strain rate showed no significant change in the average grain size but presented the increased elongation of grain shapes in the direction of about 53° regarding the direction perpendicular to the shearing direction as the shear strain increases over time. These microstructures are interpreted as both the plastic deformation and the internal recovery process in grains are balanced by the deformation under the given experimental conditions. These experiments using the reformed equipment represent the ability to sequentially observe changing the microstructure during experiments as desired in the tests with the analog material during the entire process.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.90-99
• /
• 2021

In this study, to reduce the production cost of poly(3-hydroxyalkanoates) (PHA), optimal cell growth and PHA biosynthesis conditions of the isolated strain Pseudomonas sp. EML8 were established using waste frying oil (WFO) as the cheap carbon source. Gas chromatography (GC) and GC mass spectrometry analysis of the medium-chain-length PHA (mcl-PHAWFO) obtained by Pseudomonas sp. EML8 of WFO indicated that it was composed of 7.28 mol% 3-hydrxoyhexanoate, 39.04 mol% 3-hydroxyoctanoate, 37.11 mol% 3-hydroxydecanoate, and 16.58 mol% 3-hydroxvdodecanoate monomers. When Pseudomonas sp. EML8 were culture in flask, the maximum dry cell weight (DCW) and the mcl-PHAWFO yield (g/l) were showed under WFO (20 g/l), (NH4)2SO4 (0.5 g/l), pH 7, and 25℃ culture conditions. Based on this, the highest DCW, mcl-PHAWFO content, and mcl-PHAWFO yield from 3-l-jar fermentation was obtained after 48 hr. Similar results were obtained using 20 g/l of fresh frying oil (FFO) as a control carbon source. In this case, the DCW, the mcl-PHAFFO content, and the mcl-PHAFFO yields were 2.7 g/l, 62 wt%, and 1.6 g/l, respectively. Gel permeation chromatography analysis confirmed the average molecular weight of the mcl-PHAWFO and mcl-PHAFFO to be between 165-175 kDa. Thermogravimetric analysis showed decomposition temperature values of 260℃ and 274.7℃ for mcl-PHAWFO and mcl-PHAFFO, respectively. In conclusion, Pseudomonas sp. EML8 and WFO could be suggested as a new candidate and substrate for the industrial production of PHA.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.352-358
• /
• 2011

Field Cage plots ($1m{\times}1m{\times}1m$) were established (7 units) to find the lowest limit time about the tending of red pine forest (Pinus densiflora) which can no longer be used as a habitat by Monochamus alternatus, vector insect of pine wilt disease at the experimental forest of the southern forest research center of the Korea forest research institute in February in 2010. Thinning slashes (length, 1 m; diameter, 5~10 cm) tended at the different times were put in cages, and 4~6 couples of adult M. alternatus were put into each the cage in June. Presence or absence the larval entrance holes and larval were determined in November in 2010. Incase of the combination 24, 18, 12 and 6-month-old thinning slashes from thinning times to the time of adult emergence inside a single cage, larval entrance holes were found in the 6-month-old and 12-month-old thinning slashes but larvae were found only in the 6-month-old thinning slashes (treatment 1). In case of the combination 24, 18, 15 and 12-month-old thinning slashes inside a single cage, larval entrance holes were found in the 15-month-old and 12-month-old thinning slashes but larvae were found only in the 12-month-old (treatment 2). When 24, 18, 15, 12 and 6-month-old thinning slashes with treated dry and humid condition were put separately inside each cage, larval entrance holes were found in the 18, 15, 12, 6-month-old thinning slashes without the relation of the dry and humid conditions. But larvae were found in the 15, 12, 6-month-old thinning slashes in the dry conditions and only in the 6-month-old thinning slashes in the humid conditions. Results indicated the lowest limit time which can no longer be used as a habitat by M. alternatus is before 24 month from the time of adult emergence.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.73-78
• /
• 2022

This experiment was conducted to establish the technology for artificial hay preparation in Korea. Using far-infrared heater, a device that can control temperature, airflow, and far-infrared radiation was produced and conducted on the fourth harvested alfalfa. The drying conditions were carried out by selecting a total of four conditions. For each condition, the radiation rate was set to around 40% (33-42%), and the temperature was set at 58~65℃, and the speed of the airflow was fixed at 60m/s. The overall drying time was set to 30 min in the single and 60 min (30-30 min) and 90 min (30-30-30 min) in the complex condition, and the radiation rate and temperature were changed by time period. In the case of drying condition 1, the final dry matter (DM) content was 46.26%, which did not reach a DM suitable for hay. However, all of the alfalfa corresponding to the remaining drying conditions 2 to 7 showed a DM content of 80% or more, resulting in optimal alfalfa hay production. In power consumption according to the drying conditions, the second drying condition showed the lowest at 4.7 KW, and the remaining drying conditions were as high as 6.5 to 7.1 KW. The crude protein content was found to be high at an average of 25.91% and it showed the highest content in the 5th drying condition (26.93%) and the lowest value in the 6th drying condition (25.16%). The digestibility showed a high value with an average of 84.90%, and there was no significant difference among treatments (p>0.05). Considering the above results, it was judged that drying condition 2 was the most advantageous.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.1
• /
• pp.131-142
• /
• 2021

Purpose: Clinical practicums via non-face-to-face methods were inevitable due to the COVID-19 pandemic. We developed an online program for emergency nursing care and identified the feasibility of the program and the learning achievements of students. Methods: This was a methodological study. The program was developed by three professors who taught theory and clinical practicum for adult nursing care and clinical experts. Students received four hours of video content and two task activities every week in four-week program. Real-time interactive video conferences were included. Qualitative and qualitative data were collected. Results: A total of 96 students participated in the program. The mean score for overall satisfaction with the online program was 4.72(±1.02) out of 6. Subjects that generally had high learning achievement scores were basic life support care, fall prevention, nursing documentation, infection control, and anaphylaxis care. As a result of a content analysis of 77 reflective logs on the advantages of this program, students reported that "experience in applying nursing process," "case-based learning and teaching method," and "No time and space constraints" were the program's best features. Conclusion: Collaboration between hospitals and universities for nursing is more important than ever to develop online content for effective clinical practicum.

• The Korean Society of Law and Medicine
• /
• v.22 no.2
• /
• pp.111-138
• /
• 2021

'Unlicensed medical practice by a non-medical practitioner' often represented by surrogate surgery or so-called 'ghost surgery,' causes irreparable damage to life or body, and therefore calls for very strict and effective controls. The 'bill on installment of CCTVs in an operating room' to prevent unlicensed surrogate surgery has been discussed for a long time, but due to numerous issues and heated confrontations, it has been pending in the National Assembly. Nevertheless, it is expected that the bill will be discussed again in earnest in the National Assembly because surrogate surgery and factory-type cosmetic surgery, which has been performed mainly in the field of cosmetic surgery, has also been occurring in the field of therapeutic surgery. In general, an operating room is considered as being locked or closed, as well as disallowing implicit complicity among insiders. Hence, if the insiders conspire to commit or cover up an illegal act, or if a surgeon performs rapid cosmetic surgery and then leaves the recipient (or medical institution) so as to perform more operations for profit - even if it is legitimate practice - it may result in serious consequences in terms of the recovery of a patient. In this case, installation of CCTVs can be of great help in identifying an illegal act and assessing any occurrence of negligence. On the other hand, while the fundamental purpose of therapeutic surgery is to restore a patient's life or body - that is, lifesaving - installation of CCTVs may base the relationship between a surgeon and a patient on distrust and surveillance, so it may increase the number of requests for CCTV footage or lead to more disputes, as well as placing a burden on the surgeon when best results are not achieved for a patient. As a result, the surgeon may choose non-invasive treatment contrary to conscience instead of risky but necessary surgery, or he/she may have significant difficulty in determining the timing of surgery, which may limit the provision of effective surgical medical care. Then, in terms of the relationship between a surgeon and patient, and in the long run, there could be significant disadvantages for the public and patients if CCTV footage is allowed. In this paper, we review domestic and overseas cases and issues regarding installation of CCTVs in an operating room, and present various viewpoints and suggestions to promote legislation with minimized legal problems and side effects, thereby contributing to protection of the lives and health of the public, patients, and recipients of surgery.

• Journal of Popular Narrative
• /
• v.26 no.2
• /
• pp.39-85
• /
• 2020

This paper examines the aspects of disaster narrative, which makes the most of the concept of 'masterplot' as a narrative simulation to solve problems. By analyzing and comparing the remnants of 'masterplots' operating in the disaster narratives of Korea, the United States, and Japan, the differences between each country and social community problem recognition and resolution will be discussed. Disaster narrative is the most suitable genre for applying the 'masterplot' toward community problem solving in today's global risk society, and the problem-solving method has cognitive differences for each community. First, in the case of American disaster narratives, civilian experts' response to natural disasters tracks the changes of heroes in today's 'Marvel Comic Universe' (MCU). Compared to the past, the close relationship between heroism and nationalism has been reduced, but the state remains functional even if it is bolstered by the heroes' voluntary cooperation and reflection ability. On the other hand, in Korea's disaster narratives, the disappearance of the country and paralysis of the function are foregrounded. In order to fill the void, a new family narrative occurs, consisting of a righteous army or people abandoned by the state. Korea's disaster narratives are sensitive to changes after the disaster, and the nation's recovery never returns to normal after the disaster. Finally, Japan's disaster narratives are defensive and neurotic. A fully state-led bureaucratic system depicts an obsessive nationalism that seeks to control all disasters, or even counteracts anti-heroic individuals who reject voluntary sacrifices and even abandon disaster conditions This paper was able to diagnose the impact and value of a 'masterplot' today by comparing a series of 'masterplots' and their variations and uses. In a time when the understanding and utilization of 'masterplots' are becoming more and more important in today's world where Over-the top(OTT) services are being provided worldwide, this paper attempt could be a fragmentary model for the distribution and sharing of global stories.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.234-252
• /
• 2023

This study looked at the modification of major gardens while making Deoksugung Palace (德壽宮) a park in the Japanese colonial era. This is because landscaping work was carried out in various places from 1932 to 1933 to open Deoksugung Palace, which used to be an imperial palace, as a public recreation space. In particular, major gardens such as the front yard of Seokjojeon Hall (石造殿), the back yard of Hamnyeongjeon Hall (咸寧殿), and the back yard of Jeukjodang Hall (卽阼堂) were greatly transformed into different shapes from the original. During the first phase of construction in 1932, a water tank was installed in Seokjojeon Hall Garden, creating the first water space. This water tank was originally a structure installed in the front yard of Injeongjeon Hall (仁政殿) of Changdeokgung Palace (昌德宮). Around 1909, a water tank installed in the front yard of Injeongjeon Hall was relocated to Seokjojeon Garden in the process of turning Deoksugung Palace into a park. The water tank moved from the front yard of Injeongjeon Hall was a factor that transformed the central area of Seokjojeon Garden into a water space, and a fountain installed to replace the water tank remains to this day. The backyard of Hamnyeongjeon Hall was also renovated into a new shape during the first phase of construction. Originally, there was a terraced flowerbed called Hwagye (花階) in the backyard of Hamyujae Hall (咸有齋) and Hamnyeongjeon Hall, and it was restored from the construction that took place after the Great Fire of Deoksugung Palace. In the process of turning Deoksugung Palace into a park, a three-stage stonework was built in the front yard of Jeonggwanheon Pavilion (靜觀軒) which renovated the Hwagye in the backyard of Hamyujae Hall and Hamnyeongjeon Halll. The stonework built at that time was used as a peony garden to provide visitors with attractions after the opening of Deoksugung Palace, and it remains today with the name Jeonggwanheon's Hwagye. The backyard of the Jeukjodang Hall area is a case of damage in the second phase of construction in 1933. Like the backyard of Hamnyeongjeon Hall, the backyard of Jeukjodang Hall, where the Hwagye was originally built, was converted into a Japanese-style garden in the process of turning Deoksugung Palace into a park. The site where the Hwagye was demolished was decorated with a Japanese-style garden centered on mounding, small roads, and landscaping stones, as well as topographic control and planting work. Although there have been minor changes since liberation, the backyard of the Jeukjodang Hall area is still based on a Japanese-style garden created by turning Deoksugung Palace into a park.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.121-133
• /
• 2023

The purpose of this study was to improve weed management systems under varying carbon dioxide concentrations and temperatures by evaluating the growth of Acalypha australis and observing the efficacy of four foliar and four soil herbicides, as well as measuring phytotoxicity in soybean crops treated with these herbicides. In both growth chamber and greenhouse conditions, plant height and shoot fresh weight of Acalypha australis increased as temperature increased. The variable to maximum fluorescence ratio (Fv/Fm), relative electron transport rate (ETR), plant height, leaf area, and shoot fresh weight of Acalypha australis were higher at carbon dioxide concentrations of 800 ppm than at 400 ppm. The efficacy of a foliar herbicide, glufosinate, on Acalypha australis was lower at 30℃ than at 20℃ and 25℃ in the growth chamber condition and was also lower at 29℃ than at 21℃ and 25℃ in greenhouse conditions. In contrast, mecoprop efficacy on Acalypha australis was lower at 20℃ and 25℃ than at 30℃ in growth chamber conditions and lower at 21℃ and 25℃ than at 29℃ in greenhouse conditions. Glyphosate efficacy was lower at 21℃ than at 25℃ and 29℃ under greenhouse conditions. With soil herbicides, metolachlor and ethalfluraline, efficacies were higher at relatively high temperatures under both growth chamber and greenhouse conditions. However, in the case of linuron, the difference in efficacy was not observed under varying temperatures in both growth chamber and greenhouse conditions. When ¼ of the recommended glyphosate rates were applied to Acalypha australis, efficacy was lower under 800 ppm carbon dioxide concentrations than under 400 ppm. In contrast, when ¼ of the recommended rate of bentazone was applied to Acalypha australis, efficacy was higher under 800 ppm carbon dioxide concentrations than under 400 ppm. Despite application rates, glufosinate efficacy differed insignificantly under different carbon dioxide concentrations. When applied at ¼ of the recommended rate, the efficacy of ethalfuralin was higher under 800 ppm carbon dioxide concentrations than under 400 ppm. However, efficacies of other herbicides were not different despite varying carbon dioxide concentrations. Soybean phytotoxicity in crops treated with the recommended rate and twice the recommended rate of soil herbicides was not significantly different regardless of temperature and carbon dioxide concentrations. Overall, weed efficacy of some herbicides decreased in response to different temperatures and carbon dioxide concentrations. Therefore, new weed management methods are required to ensure high rates of weed control in conditions affected by climate change.