• 제목/요약/키워드: carry-select

검색결과 96건 처리시간 0.025초

농기계(農機械) 투입모형(投入模型) 설정(設定) 및 기계이용(機械利用) 비용(費用) 분석연구(分析硏究) - PC용(用) 프로그램 개발(開發) - (Optimum Size Selection and Machinery Costs Analysis for Farm Machinery Systems - Programming for Personal Computer -)

  • 이운용;김성래;정두호;장동일;이동현;김유학
    • Journal of Biosystems Engineering
    • /
    • 제16권4호
    • /
    • pp.384-398
    • /
    • 1991
  • 본 연구는 개별농가(個別農家), 영농단(營農團), 위탁영농회사(委託營農會社)의 농기계 적정투입모형(適正投入模型) 선정(選定)과 보유기종(保有機種)이나 구입희망기종((購入希望機種) 의 경제성을 분석(分析)할 수 있는 대화식(對話式) 시뮬레이션 프로그램을 개발(開發)하고자 수행(遂行)되었으며, 그 결과(結果)를 요약하면 다음과 같다. 가. 농기계(農機械)의 적정투입(適正投入) 규모(規模) 선정(選定) 경제성(經濟性) 분석(分析)의 현실(現實) 적용성(適用性)을 높이기 위하여 투입(投入) 농기계(農機械)의 부담면적(負擔面積) 결정요인(決定要因)과 비용분석을 위한 기초자료를 문헌(文獻) 및 자료조사(資料調査)를 통하여 수집하였으며 이를 기초로 하여 수학적 모델을 개발하였다. 나. 개별(個別) 농업경영체(農業經營體)(농가(農家) 또는 영농단(營農團))의 지역(地域), 기후지대별(氣候地帶別) 적기작업기간에 따른 농기계이용(農機械利用) 일수(日數), 임작업료(賃作業料) 등을, 농촌지도소에 보급된 행정전산용(行政電算用) PC를 이용(利用)하여, 프로그램 이용자(利用者)가 입력설정(入力設定)하고 투입농기계의 경제성(經濟性)을 분석(分析)할 수 있는 대화식(對話式) 프로그램을 개발(開發)하였다. 다. 개발된 프로그램을 이용하여 벼농사 일관작업(一貫作業)은 물론 각 농작업(農作業)을 분리(分離)하여 투입 농기계별로 상세(詳細)한 경제성(經濟性)을 분석(分析)할 수 있으며, 경운 정지작업 기종은 3형식, 이앙(移秧), 방제(防除), 수확작업(收穫作業) 기종은 2형식을 동시(同時)에 분석(分析)할 수 있다. 벼농사는 경운(耕耘), 정지(整地), 방제작업(防除作業)에 대하여 분석할 수 있다. 라. 프로그램 분석결과(分析結果)는 입력(入力)된 경지면적(耕地面積)에서 기계화 영농을 수행할 때 투입 농기계의 기계사용(機械使用) 과부족일수(過不足日數), 부담면적(負擔面積), 손익분기면적(損益分岐面積), 월간(月間) 고정비(固定費), ha당(當) 기계이용비(機械利用費) 등을 포함한다. 마. 손익분기면적(損益分岐面積) 기종별(機種別) 임작업료(賃作業料)를 기준으로 한 손익분기면적(損益分岐面積)은 경운(耕耘) 정지작업(整地作業)의 임작업료(賃作業料)가 100원/평 일때 경운기, 트랙터 22,25,35,38,50,74 마력은 각각(各各) 1.8, 6.7, 7.6, 9.7, 9.3, 17.5, 23.7 ha 였으며, 이앙작업(移秧作業)의 임작업료(賃作業料)가 100원/평일 때 이앙기 보행4조, 승용4,6조는 각각(各各) 2.2, 5.8, 7.9 ha, 수확작업(收穫作業)의 임작업료(賃作業料)가 130원/평 일때 바인더, 콤바인 2,3,4조는 각각(各各) 2.2, 7.2, 10.2, 15.7 ha로 나타났다.

  • PDF

평행식 진동탄환 암거 천공기의 연구 (IV)(V)-실기 설계 제작 및 보장실험-Development of Balanced-Type Oscillating Mole Drainer(IV)(V)

  • 김용환;이승규;서상용
    • Journal of Biosystems Engineering
    • /
    • 제2권1호
    • /
    • pp.7-24
    • /
    • 1977
  • This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

  • PDF

울폐산림의 엽면적지수 추정을 위한 적색경계 밴드의 효과 (Effect of Red-edge Band to Estimate Leaf Area Index in Close Canopy Forest)

  • 이화선;이규성
    • 대한원격탐사학회지
    • /
    • 제33권5_1호
    • /
    • pp.571-585
    • /
    • 2017
  • 적색경계밴드(red-edge band)가 식물의 생물리적 특성과 밀접한 관계를 가지고 있다고 알려지고 있으며, 이에 따라 최근 적색경계밴드를 포함한 위성영상센서가 증가하고 있다. 본 연구는 향후 농림업중형위성에 적색경계밴드 탑재를 계획하고 있는 점을 감안하여, 적색경계밴드와 관련된 연구 현황과 활용 가치를 분석하고자 한다. 수관울폐도가 높은 우리나라 산림의 엽면적지수(Leaf Area Index, LAI) 추정에 있어서 적색경계밴드의 효과를 분석하였고, 더 나아가 LAI 추정을 위한 최적의 파장폭과 파장영역을 도출하고자 하였다. LAI가 5 이상인 갈참나무와 리기다소나무를 대상으로 4월부터 10월까지 시계열 분광반사 측정자료를 이용하여 LAI와의 상관관계를 분석하였다. 분광반사측정자료에서 5개의 파장폭(10 nm, 20 nm, 30 nm, 40 nm, 50 nm)과 71개의 중심파장(680 nm부터 750 nm까지 1 nm 간격)을 달리하여 모두 355개의 적색경계밴드를 모의 생성했다. 적색경계밴드를 기반으로 하는 두 개의 분광지수 NDRE(normalized difference red-edge index)와 CIRE(chlorophyll index red-edge)를 산출하여 LAI와 상관관계를 분석하였다. 적색경계밴드 기반의 분광지수인 NDRE 및 CIRE는 수관울폐도가 높은 갈참나무와 리기다소나무의 LAI와 높은 상관관계를 얻을 수 있었다. 이는 수관울폐도가 높은 국내 산림에서 일반적으로 사용되는 NDVI가 LAI와의 상관관계가 낮게 나타났던 한계를 해결할 수 있는 가능성을 보여주었다. 10 nm부터 50 nm까지 적색경계밴드의 파장폭 효과는 산림의 LAI와 관계에서 큰 차이를 보이지 않았다. LAI와 최대 상관관계를 보이는 적색경계밴드의 중심파장은 갈참나무에서는 720 nm 부근, 그리고 리기다소나무에서는 710 nm 주변으로 나타났다. 우리나라 농작물 및 산림의 식생정보 획득과 모니터링을 위한 최적의 적색경계밴드의 파장폭과 파장영역을 결정하기 위해서는 다른 생물리적인자(엽록소, 질소, 수분함량, 생체량 등)와의 관계도 충분히 고려하여야 한다.

중복을 허용한 계층적 클러스터링에 의한 복합 개념 탐지 방법 (Hierarchical Overlapping Clustering to Detect Complex Concepts)

  • 홍수정;최중민
    • 지능정보연구
    • /
    • 제17권1호
    • /
    • pp.111-125
    • /
    • 2011
  • 클러스터링(Clustering)은 유사한 문서나 데이터를 묶어 군집화해주는 프로세스이다. 클러스터링은 문서들을 대표하는 개념별로 그룹화함으로써 사용자가 자신이 원하는 주제의 문서를 찾기 위해 모든 문서를 검사할 필요가 없도록 도와준다. 이를 위해 유사한 문서를 찾아 그룹화하고, 이 그룹의 대표되는 개념을 도출하여 표현해주는 기법이 요구된다. 이 상황에서 문제점으로 대두되는 것이 복합 개념(Complex Concept)의 탐지이다. 복합 개념은 서로 다른 개념의 여러 클러스터에 속하는 중복 개념이다. 기존의 클러스터링 방법으로는 문서를 클러스터링할 때 동일한 레벨에 있는 서로 다른 개념의 클러스터에 속하는 중복된 복합 개념의 클러스터를 찾아서 표현할 수가 없었고, 또한 복합 개념과 각 단순 개념(Simple Concept) 사이의 의미적 계층 관계를 제대로 검증하기가 어려웠다. 본 논문에서는 기존 클러스터링 방법의 문제점을 해결하여 복합 개념을 쉽게 찾아 표현하는 방법을 제안한다. 기존의 계층적 클러스터링 알고리즘을 변형하여 동일 레벨에서 중복을 허용하는 계층적 클러스터링(Hierarchical Overlapping Clustering, HOC) 알고리즘을 개발하였다. HOC 알고리즘은 문서를 클러스터링하여 그 결과를 트리가 아닌 개념 중복이 가능한 Lattice 계층 구조로 표현함으로써 이를 통해 여러 개념이 중복된 복합 개념을 탐지할 수 있었다. HOC 알고리즘을 이용해 생성된 각 클러스터의 개념이 제대로 된 의미적인 계층 관계로 표현되었는지는 특징 선택(Feature Selection) 방법을 적용하여 검증하였다.

무선 센서 네트워크에서 이동 싱크 그룹의 분리를 지원하기 위한 라우팅 프로토콜 (Energy-Efficient Division Protocol for Mobile Sink Groups in Wireless Sensor Network)

  • 장재영;이의신
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제6권1호
    • /
    • pp.1-8
    • /
    • 2017
  • 무선 센서 네트워크에서 구조 팀이나 군대의 소대처럼 이동 싱크 그룹에서 통신은 이동성을 제어하기 위해 새로운 도전 문제를 가져온다. 이를 위해, 이동 싱크 그룹을 지원해주기 위한 많은 연구가 제안되었다. 이동 싱크 그룹에서 이들은 어플리케이션의 특성에 따라 다수의 작은 그룹으로 분리 될 수 있다. 예를 들면, 전쟁에서 소대는 임무를 수행하기 위해 다수의 분대로 분리 될 수 있다. 그러나, 이전 연구들은 이동 싱크 그룹의 분리에 의해 발생되는 세가지 이슈를 다루지 않기 때문에 이동 싱크 그룹의 분리를 효율적으로 지원할 수 없다. 첫 번째 이슈는 새로운 작은 이동 싱크 그룹을 위한 리더 싱크를 선정하는 것이다. 소스로부터 작은 이동 싱크 그룹까지 효율적을 데이터를 전송하는 것이 두 번째 이슈이다. 마지막으로, 세 번째 이슈는 작은 이동 싱크 그룹들의 리더 싱크들 사이에 데이터를 공유하는 것이다. 그러므로, 본 논문은 이러한 세가지 이슈를 해결하는 것에 의해 이동 싱크 그룹의 분리를 효율적으로 지원하기 위한 라우팅 프로토콜을 제안한다. 첫 번째 이슈를 위해, 제안 프로토콜은 새로운 리더 싱크와 이전 리더 싱크 사이의 거리와 새로운 리더 싱크로부터 이것의 모든 멤버 싱크까지의 거리의 합이 최소가 되도록 새로운 작은 이동 싱크 그룹의 리더 싱크를 선정한다. 두 번째 이슈의 소스로부터 작은 이동 싱크 그룹까지의 효율적인 데이터 전송을 위해, 제안 프로토콜은 소스와 리더 싱크들의 위치 정보를 통한 계산을 통하여 소스로부터 작은 이동 싱크 그룹까지의 데이터 전송 거리를 최소화하기 위한 경로를 결정한다. 세 번째 이슈와 관련하여, 제안 프로토콜은 멤버 싱크들의 위치 정보를 고려하여 리더 싱크들 사이에 효율적인 데이터 공유를 제옥하기 위한 리더 싱크들 사이의 멤버 싱크를 이용한다. 시뮬레이션 결과는 제안 프로토콜이 이전 프로토콜에 비해 에너지 소비의 관점에서 우수함을 증명한다.

교사환경기준에 관한 연구 (A Study on Environmental Standards of School Building)

  • 홍석표;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.11-43
    • /
    • 2000
  • The purpose of this study was, through analyzing the previous researches, to grasp the present status of environment of school building(ESB), research the sundry records of each element and, through comparative analysis of the standard of ESB in Korea, the United States, and Japan, select the normative standard of ESB, to clarify the point at issue presented in Regulation of Construction & facility Management for Elementary and and Secondary School in Korea, and to suggest an alternative preliminary standard of ESB. To carry out a research for this purpose, these were required: 1. to investigate the existing present status of ESB, 2. to make a comparative analysis of the standard of ESB in each country, 3. to suggest the normative standard of preliminary standard of ESB, 4. to analyze the controversial points of the standard of ESB in Korea, 5. to suggest an alternative preliminary standard of ESB. The conclusions were as follows: 1. Putting, through analyzing the previous researches, the existing present status of ESB together, it seemed that lighting environment, indoor air environment and noise environment were all in poor conditions. 2. In the result of a comparative analysis of the standard of ESB in Korea, Japan and the United States, in Korea the factors of each lighting and indoor air environment were not presented properly, in Japan, in lighting environment aspect, the standard on natural lighting and the factors on brightness were not presented., and in the USA the essential factors of each environment were throughly presented. In the comparison of the standards on each factor, Korea showed that the standard level presented was less properly prescribed than those of the USA and Japan but it also showed that the standard levels prescribed in the USA and in Japan were mostly similar to the standard levels in records investigated. 3. With the result of the normative standard selection on School Builiding environment factor of prescribed in this study, the controversial points of the standard of ESB in Korea were analyzed and the result was utilized to suggest new preliminary standard of ESB. 4. As the result of the analysis of the controversial points of the standard of ESB in Korea, it was found that the standard of ESB in Korea should be established on a basis of School Health Act and be concretely presented in School Health Regulation and School Health Rule. The factors of each environment was improperly presented in the existing standard of ESB in Korea. Moreover the standard of them was inferior to that of the records investigated and those of in the USA and in Japan and it also showed that the standard of it in Korea was improper to maintain Comfortable Learning Environment. 5. A suggested preliminary standard of ESB acquired through above study as follows: 1) In this study a new kind of preliminary standard of ESB is divided into lighting environment, indoor air environment, noise environment, odor environment and for above classification, reasonable factor and standard should be established and the controling way on each standard and countermeasures against it should be considered. 2) In lighting environment, the factors of natural lighting are divided into daylight rate, brightness, glare. In the standard on each factor, daylight rate should secure 5% of a mean daylight rate and 2% of a minimum daylight rate, brightness ratio of maximum illumination to minimum illumination should be under 10:1, and in glare there should not be an occurrence factor from a reflector outside of the classroom. And the factors of unnatural lighting are illumination, brightness, and glare. In the standard on each factor, illumination should be 750 lux or more, brightness ratio should be under 3 to 1, and glare should not occur. And Optimal reflection rate(%) of Colors and Facilities of Classroom which influences lighting environment should be considered. 3) In indoor air environment factors, thermal factors are divided into (1) room temperature, (2) relative humidity, (3) room air movement, (4) radiation heat, and harmful gases (5) CO, (6) $CO_2$ that are proceeded from using the heating fuel such as oval briquettes, firewood, charcoal being used in most of the classroom, and finally (7) dust. In the standard on each factor, the next are necessary; room temperature: $16^{\circ}C{\sim}26^{\circ}C$(summer : $E.T18.9{\sim}23.8^{\circ}C$, winter: $E.T16.7{\sim}21.7^{\circ}C$), relative humidity: $30{\sim}80%$, room air movement: under 0.5m/sec, radiation heat: under $5^{\circ}C$ gap between dry-bulb temperature and wet-bulb temperature, below 1000 ppm of ca and below 10ppm of $CO_2$, dust: below 0.10 $mg/m^3$ of Volume of dust in indoor air, and ventilation standard($CO_2$) for purification of indoor air : once/6 min.(about 7 times/40 min.) in an airtight classroom. 4) In the standard on noise environment, noise level should be under 40 dB(A) and the noise measuring way and the countermeasures against it should be considered. 5) In the standard on odor environment, odor level under Physical Method should be under 2 degrees, and the inspecting way and the countermeasures against it should be considered.

  • PDF