• Journal of Photoscience
• /
• v.10 no.2
• /
• pp.189-193
• /
• 2003

The effects of light on the regulation of ethylene biosynthesis during development of mung bean seedlings were investigated by monitoring the differential expression of seven 1-aminocyclopropane-l-carboxylate (ACC) synthase and two ACC oxidase genes. Among them, only the expression of VR-ACS1, VR-ACS6, VR-ACS7, VR-ACO1 and VR-AC02 was observable in etiolated mung bean hypocotyls. When the seedlings were de-etiolated for 1 d under a light/dark cycle of 16 h/8 h, the expression of VR-ACS6, VR-ACS7 and VR-ACO2 was controlled negatively by light. The expression of VR-ACS1 showed a tendency to increase until 6 h after a dark-to-light transition and then decreased at 12 h. On the other hand, the expression of VR-ACO1 was mostly constitutive up to 12 h after the dark-to-light transition. The opening of hypocotyl hooks during de-etiolation in the light was stimulated by the inhibition of the action of endogenous ethylene in the presence of 1-MCP. These results suggest that the negative regulation of light on the expression of ACC synthase and ACC oxidase genes eventually results in the inhibition of ethylene production with an acceleration of the opening of apical hooks.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.69-77
• /
• 2004

Degradations of pine, yellow poplar and sweet gum by two fungi, Pycnoporus cinnabarinus and Trichophyton rubrum LSK-27 were investigated. P. cinabarinus degraded pine block samples much faster than T rub rum LSK-27, whereas P. cinnabarinus and T rubrum LSK-27 degraded yellow poplar and sweet gum at almost the same rate. In an effort to get a better understanding of how fungi degrade lignin in wood, contents of various functional groups were analyzed. After three-months of degradation of pine flour by these fungi, the following changes were observed: an increase in condensed phenolic OH group and carboxylic acid group content, a decrease in the guaiacyl phenolic OH content, and little change of aliphatic OH group content. Further studies in the degradation of pine flour by P. cinnabarinus indicated that the increase in condensed phenolic OH group content and the decrease in guaiacyl phenolic OH group content occurred in the first month of the degradation. The changes of functional group contents in the degradation of unbleached softwood kraft pulp by P. cinnabarinus had the same trends as those in the degradation of pine flour. That is, structural alteration of lignin due to the kraft pulping process had little effect on how P. cinnabarinus degraded lignin.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.7-13
• /
• 2005

Continuous and intense UV irradiation on PTT film using two types of UV bulbs at different irradiation power level was carried out to modify surface characteristics of the film including zeta potential, wettability, surface energy, and dyeability. ESCA analysis of the irradiated film showed higher O/C ratio than the untreated film indicating photooxidation of outer surface layer. ATR analysis showed that the ester bonds were broken and some new groups were produced such as carboxylic acid, phenolic hydroxy, and other esters, implying that ester bonds of PTT was responsible for the observed photooxidation effect. The surface of the treated PTT film became more hydrophilic and wettable to water, coupled with increased surface energy. Polar component of the surface energy increased and nonpolar component decreased with increasing irradiation energy. The treatment also decreased zeta potential of the modified surface and nanoscale roughness increased with increasing irradiation. The dyeability of the treated films to catonic dyes was significantly improved by electrostatic and polar interaction between dye molecules and the anionic film surface. The UV irradiation seems to be a viable polymer surface modification technology, which has advantages such as no vacuum requirement and continuous process unlike plasma treatment.

• The Plant Pathology Journal
• /
• v.25 no.4
• /
• pp.317-321
• /
• 2009

Sensitivity to the new carboxylic acid amide fungicide, mandipropamid, of Phytophthora capsici causing pepper Phytophthora blight was determined on 187 isolates collected in Korea over 3 years, from 2005 to 2007. All isolates were sensitive to mandipropamid, with $EC_{30}$ values for growth of mycelia ranging from 0.001 to $0.037\;{\mu}g/ml$. Among the isolates, 147 (79.0%) isolates were sensitive to metalaxyl, whereas others were resistant to this fungicide. Mandipropamid had the same effect on mycelium growth of both metalaxyl-sensitive and metalaxyl-resistant isolates, indicating an absence of cross-resistance between these two fungicides. Comparison of the sensitivities of P. capsici isolates showed a positive correlation between sensitivity to mandipropamid and dimethomorph ($r^2$=0.8533). The results of this study indicate that there is no evidence for development of resistance to mandipropamid in this population of P. capsici isolates collected in Korea.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.1
• /
• pp.50-53
• /
• 1991

The reaction steps involved in the bioconversion of a chemically synthesized precursor, $D,L-2-amino-{\Delta}^2-thiazoline-4-carboxylic$ acid (D,L-ATC), to L-cysteine and the properties of the involved enzymes were investigated. It was found that the conversion consisted of two steps, i. e., D,L-ATC to S-carbamyl-L-cysteine (S-C-L-cysteine) and S-C-L-cysteine to L-cysteine, and the S-C-L-cysteine was an intermediate between them. While the enzymes involved in the reactions were induced by the addition of D,L-ATC as an inducer, S-C-L-cysteine induced only the enzyme involved in the latter step. The conversion of S-C-L-cysteine to L-cysteine could be also carried out in the presence of hydroxylamine and its rate was much faster than that by the corresponding enzyme. On the other hand, L-cysteine (or L-cystine) was decomposed to evolve $H_2S$ by the enzyme considered to be a kind of desulfhydrase. However, hydroxylamine was a perfect inhibitor for this enzyme.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.333-340
• /
• 1996

The relationship between ozone-induced damages and ethylend evolution was examined in tomato plants fumigated with ozone of 0.2 $\mu\ell/\ell$. The rate of evolution of ethylent by tomato plants was enhanced by ozone fumigation. Pretreatment of leaves with aminoethoxyvinylglycine (AVG), an inhibitor of ethylene evolution, significantly inhibited the evolution of ethylene that was induced by ozone and concomitantly reduced the extent of ozone-induced visible damage to leaves. Treatment with 2,5-norbonadiene (NBD), and inhibitor of the action of ethylene, strongly reduced the extent of visible damage caused by ozone, even though it did not suppress the evolution of ethylene. These results indicated that ethylene might play an important role in ozone-induced plant injuries at relatively short terms of ozone fumigation. Next, we examined the effect of tiron, a scanvenger of the free-radical, on evolution of ethylene and leaf injury caused by ozone. Tiron treatment strongly reduced the extent of ozone-induced injury, but had not inhibitory effect on the evolution of ethylene from tomato leaves. This result suggests the involvement of free-radical, such as superoxide radicals, in induction of injuries caused by ozone.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.2
• /
• pp.29-37
• /
• 1989

Using the quarternary ammonium salts as phase transfer catalyst, the nucleophilic substitution reaction of 1-chlorooctane with sodium-cyanide was investigate kinetically with respect to the formation of octanenitrile. The product was analyzed with gas chromatograph, and quantity of octanenitrile was measured. The reaction condition was considered by the effect of the reaction temperature, of the species and the amount of catalyst, of the speed of strirring, and of the concentration of reactants. The reaction was carried out in the first order on the concentration of 1-chlorooctane and sodium cyanide, respectively. The over-all order was 2nd. The activation energies for the nucleophilic substitution reaction of 1-chlorooctane and 1-bromooctane under tetrabutylammonium hydrogen-sulfate were calculated as 2.05 and 10.08kcal/mol, respectively. The effect of various caltalysts was decreased in the order of tetrabutylammonium bromide, terabutylammonium, tetrabutylammonium hydrogensulfate, and tetrabutylammonium iodide. The reaction rate was dependent on the concentration of sodium-cyanide dissolved in the aqueous phase, and the good result was shown when the mol ratio between 1-chlorooctane and sodium cyanide was one per three.

• Archives of Pharmacal Research
• /
• v.20 no.4
• /
• pp.358-362
• /
• 1997

Metabolite identification and urinary and biliary excretion of the new fluoroquinolone antibacterial agent DW116 [1-(5-fluoro-2-pyridyl)-6-fluoro-7-(4-methyl-1 -piperazinyl)-1, 4-dihydro-4-oxoquinoline-3-carboxylic acid, hydrochloride] after oral administration have been studied in Sprague-Dawley rats. The excretion kinetics were monoexponential. Most of the drug was eliminated via the hepatic and renal routes. Mean renal clearance of DW116 was 73.4 ml/hr/kg and mean biliary clearance was 83.8 ml/hr/kg. The major metabolite excreted in the bile was identified as the glucuronide ester of the parent drug using base-hydrolysis of the conjugate metabolite followed by co-HPLC with standard compound, $^{19}$ F-NMR and LC-MS methods. The glucuronide conjugate was also found in urine. The mean urinary recoveries of free and total (free plus glucuronide ester) DW116 were $28.6{\pm}2.7% $and $36.4{\pm}1.8%$ of the administered dose and the corresponding biliary recoveries were $14.4{\pm} 5.5%$ and $37.0{\pm}7.6%$, respectively.

• Elastomers and Composites
• /
• v.31 no.5
• /
• pp.335-340
• /
• 1996

In order to look into the internal structure and the properties in the silicone rubbers added reinforcing fillers; silica $additives(O{\sim}140phr)$, and to examine the behavior of charged particles, the properties of thermally stimulated current(TSC) and X-Ray diffraction are investigated, respectively. And then, from the TSC which are formed by applying the electric field of $2{\sim}5kV/mm$ to specimen at the temperature range from -150 to $260^{\circ}C$, the results are as follwing: In the case of non-filled specimen, four peaks of ${\delta},\;{\gamma},\;{\beta}\;and\;{\alpha}$ are obtained at the temperature of $-120^{\circ}C,\;-60^{\circ}C,\;20^{\circ}C\;and\;130^{\circ}C$, respectively and the case of filled specimen, three peaks of ${\delta},\;{\alpha}_2\;and\;{\alpha}_1$ are observed at the temperature of $-120^{\circ}C,\;80^{\circ}C\;and\;130^{\circ}C$, respectively. The origins of these peaks are that, the ${\delta}$ peak seems to the result from the contribution of side chain methyl radical, and the ${\gamma}$ peak from the depolarization of space charge polarization owing to be added impurity during manufacturing specimens, and the ${\beta}$ peak from the orientation of $Si-CH_3$ dipole, and the ${\alpha}_2$ near the temperature of $80^{\circ}C$ from hydroxyl in carboxylic radical, and finally, the ${\alpha}_1$ peak near the temperature of $130^{\circ}C$ from carboxyl acid that is formed by the thermal oxidation of high temperature.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.735-740
• /
• 2019

The purpose of this study is to fabricate an ophthalmic lens by copolymerizing two types of carbon nanotubes and hydrophilic hydrogel lens materials, and to investigate its application as an ophthalmic lens material by analyzing its physical properties and antimicrobial effect. For polymerization, HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate), a crosslinking agent, and AIBN (azobisisobutyronitrile), an initiator, are used as a basic combination, and a single-walled carbon nanotube and a single-walled, carboxylic-acid-functionalized carbon nanotube are used as additives. To analyze the physical properties, the water content, refractive index, breaking strength, and antimicrobial effect of the fabricated lenses are measured. The fabricated lenses satisfies all the basic properties of the basic hydrogel ophthalmic lens. The water content increases with increasing amount of additive and decreases with addition of 0.2 % ratio of nanoparticles. The refractive index is inversely proportional to the water content result. As a result of the antimicrobial test of the fabricated lens, the addition of carbon nanotubes shows an excellent antimicrobial effect. Therefore, it is considered that the fabricated lens can be applied as a functional material for basic ophthalmic hydrogel lenses.