• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.423-430
• /
• 1993

New Palladium(0)-olefin complexes, $(PMe_3)_2Pd{CH_2=C(CH_3)COOH} \;and\;(PMe_3)_2Pd{(CH_3)CH=CHCOOH}$ have been prepared by treating $Pd(PMe_3)_2$(styrene) with methacrylic acid and trans-crotonic acid, respectively. These complexes were characterized by elemental analysis, IR and $^1H-,\;^{13}C-,\;and\;^{31}P$-NMR spectroscopy. The carboxylic acid entity was found non-bonded with palladium while ${\pi}$-bond is formed between the olefin double bond and Pd(0). The results are compared with the metallacycle formation the reaction of Pd(PMe3)2(styrene) with 3-butenoic acid.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.99-107
• /
• 2004

Carbon molecular sieve (CMS) membranes were prepared by pyrolysis of polyimides having carboxylic acid groups and applied to the hydrogen separation. The polymeric membranes having carboxylic acid groups showed different steric properties as compared with polymeric membranes having other side groups ($-CH_3$ and $-CF_3$) because of the hydrogen bond between the carboxylic acid groups. However, the microporous CMS membranes were significantly affected by the decomposable side groups evidenced from the wide angle X-rat diffraction, nitrogen adsorption isotherms, and single gas permeation measurement. Furthermore, the gas separation properties of the CMS membranes were essentially affected by the pyrolysis temperature. As a result, the CMS membranes Prepared by Pyrolysis of polyimide containing carboxylic acid froups at $700^{\circ}C$ showed the $H_2$ permeability of 3,809 Baller [$1{\times}10^{-10}$ H $\textrm{cm}^$(STP)cm/$\textrm{cm}^2$.s.cmHg], $H_2$/$N_2$, selectivity of 46 and $H_2$/$CH_4$ selectivity of 130 while the CMS membranes derived from polyimide showed the H$_2$ permeability of 3,272 Barrer, $H_2$/$N_2$ selectivity of 136 and $H_2$/$CH_4$ selectivity of 177.

• Journal of the Korean Chemical Society
• /
• v.45 no.6
• /
• pp.549-554
• /
• 2001

For the development of new COX-2 inhibitor, novel compound were synthesized through induction an arylsulfonyl group to 1-position, an arylcarboxamidyl group to 2-position and an alkyl group to 4-position of L-proline. We started from 4-hydroxy-L-proline, the 4-methylphenylsulfonyl of 1-position was introduced through N-tosylation and the carboxylic acid group was protected by esterification. We sucessfully converted to a various derivatives 4b-d for O-alkyl-(or aralkyl)ation of 4-position using silver oxide as catalysis. The 4-alkyloxy-1-tosyl L-prolines 5b-d were synthesized through base-hydrolysis for the deprotection of carboxylic acid. Final compound 1,2,4-substituted pyrrolidines, 4-alkyloxy-2-phenylcarboxamidyl-1-tosyl pyrrolidines 6a-d were synthesized through the condensation of arylamine with 3 and 5b-d using DCC.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.214-219
• /
• 1993

Properties of the antioxidative fraction isolated from browning reaction product (BRP) that were obtained from 2 M L-ascorbic acid (AsA) solution (adjusted to pH 7.0) by heating for 25 hrs at $85^{\circ}C$ were investigated. Both of dialyzable and nondialyzable fraction isolated from BRP showed antioxidative effect. Dialyzable fraction has stronger antioxidative activity than nondialyzable. Dialyzable fraction was divided into the three fractions (A, B, C) by gel filtration. Among these fractions, the fraction (A) that had the highest reducing power and lowest browning drgree had lowest antioxidative activity. The fraction (C) that had lowest reducing power and highest browning degree showed strongest antioxidative effect. In the UV-visible spectrum of these fractions, the maximum absorption wavelengths of fraction A and B were 266.1 and 257.4nm, respectively, and fraction C showed a weaker absorption peak at 274.8nm. Infrared (IR) spectrum results showed that all fractions (A, B, C) had both hydroxy and carboxylic groups, and fraction B and C had carboxylic ester group.

• YAKHAK HOEJI
• /
• v.37 no.2
• /
• pp.136-142
• /
• 1993

To a suspension of 1-cyclopropyl-6,8-difluoro-1,4-dihydro-7-{3,7-diazabicyclo[3.3.0]oct-1(5)-en-3-yl}-4-oxo-3-quinoline carboxylic acid(C1) in sodium hydroxide solution and water is added dropwise with stirring carbon disulfide. [6R-[6$\alpha$, 7$\beta$(Z)]]-7-[[[2-Amino-4-thiazoly)methoxyimino]-acetyl]amino]-3-[[[[7-( 3-carboxy-1-cyclopropyl-6,8-difluoro-1,4-dihydro-4-oxo-7-guinolonyl)-3,7-diazabicyclo[3.3.0]oct-1(5)-en-3-yl]thioxomethyl]thio]methyl]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-2-carboxylic acid (DACD) was synthesized from 1-cyclopropyl-6,8-difluoro-1,4-dihydro-7-[7-(mercapto) thioxomethyl-[3,7-dia zabicyclo[3.3.0]oct-1(5)-en-3-yl}]-4-oxo-3-quinoline carboxylic acid disodium salt(C2) and cefotaxime. The invitro activity of novel dual-action cephalosporin, DACD, was compared with the in vitro activities of CENO(cefotaxime 3'-norfloxacin dithiocarbamate), cefotaxime, and norfloxacin against a variety of bacterial species. In vitro activity of DACD was superior to that of norfloxacin against Streptococcus pyogenes. Against Gram-positive and Gram-negative bacteria, its activity was almost equal to that of CENO.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.103-110
• /
• 1995

The crystal structure of 1-Cyclopropyl-7-(2,7-diazabicyclo[3.3.0]oct-4-en-7-yl)-6-fluoro-8-methoxy-4-oxo-1,4-dihydroquinoline-3-carboxylic acid (HCI salt) has been determined from single crystal x-ray diffraction study ; C20H21N3O4FCl, Monoclinic, C2/c, a=28.349(2)Å, b=11.941(2)Å, c=12.806(2)Å, β=96.428(9)°, V=4307.8Å3, T=296(2)K, Z=8, CuKα(λ=1.5418Å). The molecular structure was solved by direct method and refined by full-matrix least squares to a final R=4.96% for 2258 unique observed F0>4σ(F0) reflections and 293 parameters. The conformation of the molecule is stabilized by an intramolecular O(28)-H(28)…O(25) [2.517(4)Å, 156.7(447)°] hydrogen bond. Intermoleculars distances correspond to van der Waals contacts.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.24-31
• /
• 2001

Polypropylenes(PP) with different melt index values were mixed with ethylene-propylene rubber(EPR) or ethylene-propylene diene monomer rubber(EPDM) and an ethylene copolymer containing carboxylic acid group in a twin screw extruder. Then test specimens were prepared from the pellets of the blends with an injection molding machine. The mechanical properties and morphology of fractured surfaces were measured. Relative peak intensities of carboxylic acid group on the specimen surface were measured with an attennuated total reflection infrared spectrometer (ATR-IR) and compared with each other. The blend specimens were found to have the gradient morphology of rubber domains in PP matrix in the core region and PP skin layer. The blends containing PP of higher melt index showed greater content of ethylene copolymer containing carboxylic acid on the surface when the relative peak intensities of ATR-IR for carboxylic acid were compared. As the melt index values were increased, the decrease tendency in mechanical propeties such as tensile strength and impact strength was more significant for PP/EPR blends than PP/EPDM blends.

• The Korean Journal of Nuclear Medicine
• /
• v.36 no.6
• /
• pp.333-343
• /
• 2002

Purpose: A new linker, hydrazino nicotinamide (HYNIC), was recently introduced for labelling of liposome with $^{99m}Tc$. In this study we synthesized HYNIC derivatized PEG (polyethylene glycol)-liposomes radiolabeled with $^{99m}Tc$. Materials and Methods: In order to synthesize HYNIC-DSPE (distearoyl phosphatidyl ethanolamine) which is a crucial component for $^{99m}Tc$ chelation, first of all succinimidyl 6-BOC-hydrazinopyridine-3-carboxylic acid was synthesized from 6-chloronicotinic acid by three sequential reactions. A DSPE derivative of succinimidyl 6-BOC-hydrazinopyridine-3-carboxylic acid was transformed into HYNIC-DSPE by HCI/dioxane. HYNIC-PEG-liposomes were prepared by hydration of the dried lipid mixture of EPC (egg phosphatidyl choline): PEG-DSPE : HYNIC-DSPE:cholesterol (1.85:0.15:0.07:1, molar ratio). The HYNIC-PEG-liposomes were labeled with $^{99m}Tc$ in the presence of $SnCl_2{\cdot}2H_2O$ (a reducing agent) and tricine (a coligand). To investigate the level of in vivo transchelation of $^{99m}Tc$ in the liposomes, the $^{99m}Tc$-HYNiC-PES-liposomes were incubated with a molar excess of DTPA, cysteine or glutathione solutions at $37^{\circ}C$ for 1 hour. The radiolabeled liposomes were also incubated in the presence of human serum at $37^{\circ}C$ for 24 hours. Results: 6-BOC-hydrazinopyridine-3-carboxylic acid was synthesized with 77.3% overall yield. The HYNIC concentration in the PEG-coated liposome dispersion was 1.08 mM. In condition of considering the measured liposomal size of 106 nm, the phospholipid concentration of $77.5\;{\mu}mol/m{\ell}$ and the liposomal particle number of $5.2{\times}10^{14}$ liposomes/ml, it is corresponded to approximate 1,250 nicotinyl hydrazine group per liposome in HYNIC-PEG-liposome. The removal of free $^{99m}Tc$ was not necessary because the labeling efficiency were above 99%. The radiolabeled liposomes maintained 98%, 96% and 99%, respectively, of radioactivity after incubation with transchelators. The radiolabeled liposomes possessed above 90% of the radioactivity in serum. Conclusion: These results suggest that the HYNIC can be synthesized easily and applied in labelling of PEG-liposomes with $^{99m}Tc$.

• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.116-121
• /
• 2000

It has been considered that malic acid, $\alpha$-hydroky succinic acid, could not form crosslinks in the cellulosic materials unless activated by other polycarboxylic acids such as butanetetracarboxylic acid or citric acid because there are only two carboxylic acids per molecule available fur the formation of one anhydride intermediate. However we found that the dicarboxylic malic acid with sodium hypophosphite catalyst without the addition of other crosslinkers was able to improve wrinkle resistance of cotton up to $294^{\circ}$(dry WRA) and $285^{\circ}$ (wet WRA), which is a measure of crosslinking level in cotton. $^1$H FT-NMR, FT-IR and GPC analysis indicated the in-situ formation of an trimeric $\alpha$, $\beta$-rnalic acid with a composition of 1:3 through the esterification between hydroxyl group and one of carboxylic groups in malic acid during curing. The crosslinking of cotton was attributed to the trimeric $\alpha$, $\beta$-malic acid, a tetracarboxylic acid, which can form two anhydride rings during curing. The influence of crosslinking conditions such as concentrations of malic acid and catalyst, pH of the formulation bath, and curing temperature were investigated in terms of imparted wrinkle resistance and whiteness. The addition of reactive polyurethane resin in the formulation slightly increased the mechanical strength retention of crosslinked fabric coupled with additional increase in wrinkle resistance.

• YAKHAK HOEJI
• /
• v.23 no.2
• /
• pp.125-128
• /
• 1979

In the formation of L(+) -glutamine from L(+) -glutamic acid-5-hydrazide, large amount of Raney-Ni was effective under normal pressure but hydrogenation or amonolysis of ester under pressure was useless. Preparation of glutamine with .alpha.-ketoglutaric acid (by way of 1, 4, 5, 6-tetrahydro-6-oxo-3-pyridazine carboxylic acid) is intersting but not so efficient in yield.