• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.398-403
• /
• 1980

Carboxyl-terminated polybutadiene was prepared by free-radical polymerization using 4,4'-azobis-[4-cyano valeric acid] as an initiator and the effect of initiator concentration on polymer properties was investigated. Polymerization of the carboxyl-terminated polybutadiene was carried out varying the initiator concentration reacting with a constant butadiene concentration. The carboxyl weight percent decreased with increasing initiator concentration. The conversion was proportional to the square root of initiator concentration, giving a functionality greater than 2.0 which is consistent with the general tendency of free radical polymerization.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.613-627
• /
• 2015

Simple methods of conductometric titration and infrared spectroscopy were used to quantify the surface carboxyl content of cellulose fibrils isolated by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation. The effects of different cellulose sources, post or assisted-sonication oxidation treatment, and the amount of sodium hypochlorite addition on the carboxyl content of cellulose were reported. This study showed that post sonication treatment had no influence on the improvement of surface carboxyl charge of cellulose macrofibrils (CMFs). However, the carboxyl content increased for the isolated cellulose nanofibrils (CNFs). Thus the carboxyl content of CNFs is different from those of their corresponding bulk oxidized cellulose and CMFs. Filter paper as a CNF source imparted a higher surface charge than did hardwood bleached kraft pulp (HWBKP) and microcrystalline cellulose (MCC). It was considered that the crystallinity and microstructure of the initial cellulose affected oxidation efficiency. In addition, the carboxyl content of cellulose was successfully controlled by applying sonication treatment during the oxidation reaction and adjusting the amount of sodium hypochlorite.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.236-242
• /
• 2005

Three dithioester-derived carboxyl acid functionalized RAFT(reversible addition-fragmentation chain transfer) agents, viz. acetic acid dithiobenzoate, butanoic acid dithiobenzoate and 4-toluic acid dithiobenzoate, were used in the RAFT bulk polymerization of styrene, in order to study the effects of the R-group structure on the living nature of the polymerization. By conducting the polymerization with various concentrations of the RAFT agents and at different temperatures, it was found that the R-group structure of the RAFT agents plays an important role in the RAFT polymerization; the bulky structure and radical stabilizing property of the R-group enhances the living nature of the polymerization and allows the polymerization characteristics to be well controlled.

• Elastomers and Composites
• /
• v.32 no.5
• /
• pp.309-317
• /
• 1997

Estimation of the dielectric properties of insulating silicone rubbers added reinforcing fillers $(SiO_2,\;0{\sim}140phr)$ are very important to investigate the polymer structure. The characteristies of the dielectric absorption in insulating silicone rubbers were studied in the frequency range from 30Hz to 1MHz at the temperature range from $0{\sim}170^{\circ}C$. In the case of non-filled specimen, the dielectric loss is due to the syloxane which is the main chain of silicone rubber at the low temperature below $50^{\circ}C$ and the frequency at 330Hz, and is due to methyl and vinyl radical over the frequency of 1MHz. It is confirmed that the methyl radical or the vinyl radical becomes thermal oxidation at the high temperature over $100^{\circ}C$ and then the dielectric disperssing owing to the carboxyl radical Is appeared. In the case of filled specimen, the dielectric constant is in creased with the additives of reinforcing fillers due to the effect of interfacial polarization explained by MWS(Maxwell-Wagner-Sillars)'s law. The dielectric loss is decreased by the disturbance of reinforcing fillers that is permeated between networks.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.3
• /
• pp.222-244
• /
• 2002

A mixture of methyl ester derivatives of fatty acids from the oils of pine nuts was well resolved to five fractions differing by degree of unsaturation by silver ion solid-phase extraction column chromatography ($Ag^{+}$-SEC). Polyunsaturated fatty acid with non-methylene interrupted conjugated double bond (NMiDB) radical held more strongly to silver ions in the column than methylene interrupted conjugated double bond (MiDB) one when they had the same number of double bonds. Although both the picolinyl ester and DMOX derivative provided clear mass ion species powerful enough to elucidate the structure of the polyunsaturated fatty acid (PUFA) with NMiDB and/or methylene interrupted conjugated double bond (MiDB) radical in the oils, the picolinyl ester of PUFA with NMiDB radical did not provide a cluster of mass ions neighboring diagnostic mass ions induced by the double bond in the proximal to the carboxyl group. However, the DMOX derivative of PUFA with NMiDB group as well as MiDB showed abundant mass ion species differing by gaps of 12 amu, which made it possible with greater ease to locate the double bonds in the molecule. The oil contained $C_{18:2{\omega}6}$ (46.2 %) and $C_{18:1{\omega}9}$ (25.4 %) as main components, and considerable amounts of PUFAs with NMiDB radical such as ${\Delta}^{5.\;9.\;12}-C_{18:3}$ (16.0 %), ${\Delta}^{5.\;9}-C_{18:2}$ (2.3 %) and ${\Delta}^{5.\;11.\;14}-C_{20:3}$ (0.8 %).

• Elastomers and Composites
• /
• v.31 no.5
• /
• pp.335-340
• /
• 1996

In order to look into the internal structure and the properties in the silicone rubbers added reinforcing fillers; silica $additives(O{\sim}140phr)$, and to examine the behavior of charged particles, the properties of thermally stimulated current(TSC) and X-Ray diffraction are investigated, respectively. And then, from the TSC which are formed by applying the electric field of $2{\sim}5kV/mm$ to specimen at the temperature range from -150 to $260^{\circ}C$, the results are as follwing: In the case of non-filled specimen, four peaks of ${\delta},\;{\gamma},\;{\beta}\;and\;{\alpha}$ are obtained at the temperature of $-120^{\circ}C,\;-60^{\circ}C,\;20^{\circ}C\;and\;130^{\circ}C$, respectively and the case of filled specimen, three peaks of ${\delta},\;{\alpha}_2\;and\;{\alpha}_1$ are observed at the temperature of $-120^{\circ}C,\;80^{\circ}C\;and\;130^{\circ}C$, respectively. The origins of these peaks are that, the ${\delta}$ peak seems to the result from the contribution of side chain methyl radical, and the ${\gamma}$ peak from the depolarization of space charge polarization owing to be added impurity during manufacturing specimens, and the ${\beta}$ peak from the orientation of $Si-CH_3$ dipole, and the ${\alpha}_2$ near the temperature of $80^{\circ}C$ from hydroxyl in carboxylic radical, and finally, the ${\alpha}_1$ peak near the temperature of $130^{\circ}C$ from carboxyl acid that is formed by the thermal oxidation of high temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.10
• /
• pp.821-827
• /
• 2001

In this study performed to identify a degradation mechanism in macromolecular insulating material, the contact angel, surface potential decay, surface resistivity, and XPS analysis were compared after exposure of FRP laminate to plasma discharge. In the case of contact angle, the surface of specimen untreated showed weak hydrophobic property of 73。. However, the contact angle was decreased to 20。in the plasma-treated specimen. In the case of chemical changes arising form plasma treatment, carboxl radicals were generated mainly in the surface treated, which was rapidly changed to the hydrophilic one. In the corona potential decay study to determine the electrical changes of the surface, positive charges were rapidly decreased when compared with negative charges, leading to negative property in the surface of specimen not treated. However, in the case of the hydrophilic surface, lots of carboxl radicals acting as positive polarity were generated, resulting in positive surface. Owing to such positive surface, charges of negative polarity applied were rapidly decreased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.260-263
• /
• 1996

The thermally stimulated currents(TSC) are measured to know the behaviour of charging particles of epoxy composites at the temperature range of -160∼200[$^{\circ}C$] and to prove the variation according to curing time in this study. It is confirmed that the peak amplitude is inversely proportional to the curing time, and TSC are reduced is and T$\sub$m/ is moved to high temperature side according to the curing time because carboxyl radical is formed by thermal oxidation and motility becomes lack.

• Biomolecules & Therapeutics
• /
• v.14 no.2
• /
• pp.96-101
• /
• 2006

Amyloid$\beta(A{\beta})$ has been reported have an effect on the induction of oxidative stress that involves the functional and structural abnormalities in Alzheimer's disease. As a role of a radical scavenger, a green tea treatment was found have some inhibitory effect on the neurodegenerative process. The aim of this study was to determine if green tea catechin (GTC) reduces in transgenic model. To test this, transgenic mice carrying neuronspecific enolase (NSE) controlled C-terminus (105) of APP (APP-C105) were created and treated them with a low ana high dose of GTC for 6 months. Herein, we conclude that transgenic mice expressing NSE/APP-C105 were successfully created and the GTC-treated group exhibited significant reduction in body weight. Thus, GTC might be a good prevention of obesity or good treatment for AD patient.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.147-153
• /
• 2007

Hyperbranched polysiloxysilanes (HBPSs), with a variety of terminal functional groups (vinyl, epoxy, carboxyl and hydroxyl), were synthesized by the self-polymerization of an $AB_3$ type monomer of tris(dimethylvinylsiloxy) silane, with subsequent end-functionalizations, such as epoxidation and radical addition reaction, respectively. The ratio of the $\alpha-and$ $\beta-addition$ linkages in the HBPS polymerized by hydrosilylation of the $AB_3$ monomer was found to be approximately 1 to 3. The thermal stability and solubility were affected by the terminal functional groups.