• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.492-499
• /
• 1997

The effect of oxidants, gluten and gums on breadmaking quality of wheat-purple sweet potato(Ipomoea batatas) composite flour were studied. Alveograph tests of doughs showed that all additives increased the P, L and W values. Of these additives, L-Ascorbic acid, gluten, carboxy methyl cellulose have a significant effect on alveogram indexes. SEM showed that the dough added with additives changed some what in appearance when compared with the control. When oxidants was added, the doughs discontinuous gluten film were observed. No significant differences ,were evident in bread crumb color among the additives. And textural characteristics of bread crumb were influened by adding additives. Breads containing additives showed an increase in max weight, strength and hardness and a decrease in springness and cohesiveness. Average enthalpy values for all bread crumb after 7days increased with storage time. However, addition of additives decrease the rate of staling slightly more than that of the control. Addition of L-Ascorbic acid, L-Cystine, carboxy methyl cellulose and hydroxy propyl methyl cellulose increased the loaf volume significantly, and with except potassium bromate bread scores were acceptable.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.2
• /
• pp.137-140
• /
• 1982

Three levels of inoculum concentration from 10 to 30 percent, three kinds of adhesive materials, gum arabic, methyl cellulose and carboxy methyl cellulose, and five different pelleting materials including 4 different sources of lime and calcium carbonate were compared to investigate an optimum condition for seed inoculation by counting the number of viable rhizobium cells. For a peat-cultured Rhizobium inoculant, 10 per cent was found to be an optimum by showing 3.5 $\times$ 10$^9$ viable cells per seed. The highest number of viable cells were observed from gum arabic at 40 per cent, methyl cellulose at 5 per cent and carboxy methyl cellulose at 4 per cent. Among pelleting materials, a dental lime for investment originated from Ransom & Randolph Co. Ohio, U.S.A. resulted best as pelleting material.

• Food Science of Animal Resources
• /
• v.20 no.3
• /
• pp.199-206
• /
• 2000

축육 생산시 주요 부산물인 돼지 심장근으로부터 항산화제(0.02% propyl gallate, 0.2% asxorbic acid, 0.2% sodium tripolyphosphate) 첨가 세척액(25 mM phosphate buffer, pH 6.0)에 의해 제조된 surimi(5% protein 0.6 M NaCl, 25 mM phosphate buffer, pH 6.0)를 alginate(0.4%), calcium carbonate(0.075%) 및 lactate(0.6%) 등의 첨가에 의해 AC surimi 로 조제한 다음, CMC 또는 MC를 일정수준 (0.5%, 1.0%) 첨가하여 surimi 의 pH, 겔의 보수력과 조리 손실을 비롯하여 겔읨 루성을 비교 검톻였다. CMC 첨가시 pH는 0.2 단위씩 감소하는 경향을 보인데 비해 MC 첨가시에는 뚜렷한 변화를 보이지는 않았다. 조리 손실에 대한 영향을 살펴 본 결과 CMC와 MC 첨가구에서 0.5% CMC 첨가구를 제외하고서는 나머지 세 처리구에서 감소하는 경향이었고, 특히 MC 첨가시에는 대조구에 비해 뚜렷한 감소 경향을 나타내었으나(p<0.05) 첨가수준에 따른 차이는 나타나지 않았다 CMC나 MC의 첨가는 보수력에 대해서는 거의 영향을 미치지 않은 것으로 나타났고, 물성에 대한 측정 결과에서 CMC 첨가시에는 겔의 강도. 경도 및 탄성등은 약간 증가하였으나 유의적인 차이를 나타내지는 않았고 (P<0.05), MC 첨가시에는 뚜렷한 차이를 나타내지 않았으며, 겔 응집성에 대해서는 CMC와 MC 첨가에 의해 서로 다른 경향을 나타내었다.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2000.06a
• /
• pp.134-134
• /
• 2000

• Journal of Pharmaceutical Investigation
• /
• v.14 no.4
• /
• pp.170-177
• /
• 1984

For the purpose of improving the fluidity of enteric-coated powders, various mineral silicates were added during spray drying process. Aqueous slurries of cimetidine, mineral silicates containing CMEC (carboxy methyl ethyl cellulose) were spray dried using a centrifugal wheel atomizer. The finely agglomerated powders obtained by this process were flowing as opposed to the original powders. The effect of four mineral silicates (colloidal silica, talc, bentonite, and kaolin) on the micromeritic properties and dissolution profiles of spray dried agglomerates were examined.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.381-384
• /
• 2010

In this study, the microbial safety and mechanical properties of xeno-bone graft material irradiated were investigated during the storage. Xeno-bone graft of the deminerlized bone matrix in carboxy-methyl-cellulose was gamma-irradiated and was cultured in PCA and PDA agar to check microbial contamination. Total aerobic bacteria and fungi were not detected in the irradiated and non-irradiated sample stored in accelerator at $30^{\circ}C$ for 10 months. Viscosity of CMC treated gamma irradiation was also not changed by holding period.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.556-561
• /
• 2021

Recently, iron oxide nanoparticles have been used as the subject of many studies on drug delivery system (DDS) due to their excellent magnetic properties and biocompatibility in response to external magnetic fields. In this study, hyaluronic acid-superparamagnetic microneedles (HA-SMNs) and carboxy methyl cellulose-superparamagnetic microneedles (CMC-SMNs) containing superparamagnetic iron oxide nanoparticles (SIONs) were prepared with HA and CMC as a matrix materials of MNs (microneedles). Various properties of SMNs were then investigated with scanning electron microscopy (SEM), superconducting quantum interference device-vibrating sample magnetometer (SQUD-VSM), frequency mixing magnetic detection (FMMD), and polymer/bio membrane. The SQUID-VSM measurements showed superparamagnetism of HA-SMNs and CMC-SMNs containing SIONs. The FMMD results demonstrated that the signal intensity changed significantly as the concentration of SIONs increased. In addition, SMNs exhibited the average skin permeability intensities on the bio membrane for HA-SMNs and CMC-SMNs were 92.5 and 98.5%, respectively. These results suggested that SMNs could be utilized as deliver materials for a TDDS and MR molecular imaging.

• Journal of radiological science and technology
• /
• v.26 no.1
• /
• pp.39-44
• /
• 2003

The aim of this study is to evaluate a efficient w/v% barium suspension and w/v% sodium carboxy methyl cellulose (SCMC) for small bowel examination. Between november 2001 and june 2002, 370 patients were examined small bowel examination with oral administration of barium suspension mixed with SCMC. we classified into six groups including A(fine type 40% $BaSO_4$ mixed 0.5% SCMC and 600 ml 0.5% SCMC administration), B(fine type 30% $BaSO_4$ mixed 0.5% SCMC), C(fine type 20% $BaSO_4$ mixed 0.5% SCMC), D(fine type 25% $BaSO_4$ mixed 0.5% SCMC), E(D mixed coarse type 25% $BaSO_4$ mixed 0.5% SCMC), F(D mixed coarse type 25% $BaSO_4$ mixed 0.75% SCMC). We measured transparency rate of contrast media transit time, administration dose, viscosity and particle size. The transparency rate was higher then 80 kV and 90 kV in 100 kV in the same 20 mAs condition. Transit time was the fastest in A group(mean trans time 56 minutes) and the slowest in E group(mean 100 minutes), Administration dose was the smallest in A group(mean dose 541 ml and the most in E group(mean 1,100 ml), viscosity was the lowest in E(125.1 mpa/s) and the highest in A(375.5 mpa/s), and particle size was $1.0\;{\mu}m$ in A, B, C, and D group, $0.6\;{\mu}m,\;1.0\;{\mu}m,\;10.0\;{\mu}m$ in E, F group. In conclusion, we propose that the efficient condition for small examination is high voltage technique, high density $BaSO_4$, and 0.625% w/v SCMC.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.260-268
• /
• 2005

A heat-resisting diatomite protection tube, using diatomite as a main component, was manufactured through an extrusion molding of ceramic slurry in different component ratios. And its mechanical strength, carbon analysis and microstructural non-homogeneity were investigated. After fixing $60wt\%$ of porous diatomite whose particle size was $50\~100\;{\mu}m$, the optimum mixture ratio with composition variables by changing $1\;wt\%$ of each component that was silica sol$(4.3\~7.3\;wt\%)$ as an inorganic binder, CMC (Sodium CarboxyMethyl Cellulose $(6\~9\;wt\%)$) as an organic binder and paper powder$(4.7\~7.7\;wt\%)$ was obtained. As a result of the investigation on a composition containing $60\;wt\%$ diatomite, $5.3\;wt\%$ silica sol, and $7\;wt\%$ CMC, a heat-resisting protection tube that could be used as a molten steel probe for measuring the temperature and components of molten steel was developed. The bending strength, compressive strength, and elastic modulus of the protection tube developed, that contained $\le2.3\;wt\%$ carbon, were 7.1 MPa, 7.5 MPa, and 1090 MPa, respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.46-53
• /
• 2015

Paper strengthening system of PVAm (polyvinylamine) has been used with strong negative charge polymer for electrostatic neutralization due to strong positive charge of PVAm. Recently, because of the controversy caused by the possibility of remaining PAM monomers in white water, a search for paper strength agent that can substitute for PAM was suggested. Therefore, this study was carried out to evaluate a dry strength polymer of PVAm. Starch and CMC were used as a substitute for PAM. The dual polymer system of PVAm and anionic charge control agent such as anionic starch or CMC (carboxy methyl cellulose) were found to be very effective as strength agent compared to the chemicals based on acrylamide.