• Journal of the Korean Wood Science and Technology
• /
• 제38권1호
• /
• pp.43-48
• /
• 2010

톱밥과 왕겨로 제조된 혼합보드로 세라믹을 제조한 후 수지함침율 및 소성온도에 따른 세라믹의 표면온도를 조사하였다. 경과시간 초기에 표면온도가 급상승 하였으며 수지함침율 60~70%와 소성온도 $1200^{\circ}C$로 제조된 세라믹의 표면온도가 가장 높았다. 히터의 표면온도보다 혼합세라믹의 표면온도 하강속도가 느려 혼합세라믹의 열 보존력이 높음을 알 수 있었다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.358-364
• /
• 2018

An isotropic pitch precursor for fabricating carbon fibres was prepared by co-carbonization of ethylene bottom oil(EBO) and polyvinyl chloride (PVC). Various pre-treatments of EBO and PVC, and a high heating rate of $3^{\circ}C/min$ with no holding time, were evaluated for their effects on the oxidative stabilization process and the mechanical stability of the resulting fibres. Our stabilization process enhanced the volatilization, oxidative reaction and decomposition properties of the precursor pitch, while the addition of PVC both decreased the onset time and accelerated the oxidative reaction. Aliphatic carbon groups played a critical role in stabilization. Microstructural characterization indicated that these were first oxidised to carbon-oxygen single bonds and then converted to carbon-oxygen double bonds. Due to the higher heating rate and lack of a holding step during processing,the resulting thermoplastic fibers did not completely convert to thermoset materials, allowing partially melted, adjacent fibres to fuse. Fiber surfaces were smooth and homogeneous. Of the various methods evaluated herein, carbon fibers derived from pressure-treated EBO and PVC exhibited the highest tensile strength. This work shows that enhancing the naphthenic component of a pitch precursor through the co-carbonization of pre-treated EBO with PVC improves the oxidative properties of the resulting carbon fibers.

• Journal of the Korean Wood Science and Technology
• /
• 제46권1호
• /
• pp.60-66
• /
• 2018

탄화보드의 신용도개발을 위하여 합판, 파티클보드, 중밀도섬유판 및 물푸레나무를 $400{\sim}1100^{\circ}C$로 탄화하여 탄화온도가 탄화보드의 표면온도에 미치는 영향을 검토하였다. 탄화보드의 표면온도는 시간이 경과함에 따라 경과시간 12분까지는 급격히 상승하다가, 그 이후에는 완만히 상승하였으며 20분 이후부터는 온도가 안정화되었다. 제조시 탄화온도가 높을수록 제조된 탄화보드의 밀도가 크고 시간경과에 따른 표면온도가 높아 밀도가 표면온도상승에 영향을 미친 것으로 판단된다. 실리콘러버히터의 표면온도보다 탄화보드의 표면온도 하강속도가 느려 탄화보드가 오랜 시간 열을 유지하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.158-159
• /
• 2021

When the porous concrete is exposed to the external environment, the internal relative humidity changes from time to time due to the inflow and outflow of moisture. This change in moisture is affected by temperature. The temperature and humidity of concrete is dominant in the carbonation rate, the largest cause of deterioration of concrete. In this study, actual weather data were used as boundary conditions. A carbonization model of concrete temperature and humidity and calcium hydroxide was constructed to perform long-term analysis. There is a slight error in the carbonation formula of the Japanese Academy of Architecture applying the Kishtani coefficient, a representative experimental formula related to carbonization, and the analysis result values. However, considering that it behaves very similarly, it is thought that a fairly reliable numerical analysis model has been established. A slight error is believed to be due to the fact that the amount of residual calcium hydroxide in the carbonated site has not yet been clearly identified.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.87-90
• /
• 2006

The experimental study has been done for two kinds of pelletized RDFs to Investigate the carbonization effect to the chlorine concentrations, the heating value and the yield of Produced char in variable conditions of the carbonizing temperature and reaction time. One(RDF-1) is made of 100% wasted plastics and the other(RDF-2) is made of 60% wasted paper with 40% wasted plastics. The screw type carbonizer heated Indirectly by oil burner was used for the experiment and RDF feeding rate was 3kg/hr. The carbonizing temperature was 300, 350 400 and $45^{\circ}C$ and the reaction tine was 5, 10 and 15 minutes respectively. As the increase of carbonizing reaction time and temperature, the chlorine reduction rate was increased and oppositely the yield of char was decreased At the temperature of $400^{\circ}C$ and reaction time of 10 minutes the chlorine reduction rate was 60% and the char yield rate was 80% for the RDF-1 and those of RDF-2 were 80% and 75%, respectively. Additional activation experiment to the char produced from RDF-2 was done in the activation reactor by hot steam supply. As the increase of activation time the iodine number was increased. At the activation time of 20 minutes the iodine number was 552mg/g and the yield of activated carbon was 16%.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.467-472
• /
• 1997

Porous silicon was prepared by an anodic etching. The pore size was about 10 nm at an etching time of 20 sec and a current density of 20 mA/$\textrm{cm}^2$. The porous layer was composed of an micro-porous layer (0.6 ${\mu}{\textrm}{m}$) and a macro-porous layer (10 ${\mu}{\textrm}{m}$). Room temperature PL with maximum peak 6700$\AA$ appeared. The peak disappeared by an oxidation reaction when the porous silicon was heated to 100~20$0^{\circ}C$ in atmosphere. In order to avoid the oxidation a heat treatment was done in H2 atmosphere. The micro-pore and Si column, which formed quantum well, were collapsed by the high temperature. The PL maximum peak of heated sample was gradually red-shifted and showed about 300$\AA$ red-shift at 50$0^{\circ}C$. The intensity of PL was maintained to high temperatures in lower pressures. The porous Si was carbonized in C2H2+H2 gas in order to increase thermal stability. The carbonization of the porous Si prevented red-shift of the maximum PL peak caused by sintering effect at high temperatures, and the carbonized porous Si showed Pl signal at higher temperatures by above 20$0^{\circ}C$ than the sample in H2 atmosphere.

• 한국환경과학회지
• /
• 제22권7호
• /
• pp.837-845
• /
• 2013

This study was designed to synthesize mesoporous carbon, porous carbonic material and to characterize its surface in an attempt to adsorption methane gas($CH_4$). Synthesis of mesoporous carbon was carried out under two steps ; 1. forming a RF-silica complex with a mold using CTMABr, a surfactant, and TEOS, raw material of silica, and 2. eliminating silica through carbonization and HF treatment. The mesoporous carbon was synthesized under various conditions of synthesis time and calcination. Eight different types of mesoporous carbon, which were designated as MC1, MC2, MC3, MC4, MCT1, MCT2, MCT3, and MCT4, were prepared depending upon preparation conditions. The analysis of mesoporous carbon characteristics showed that the calcination of silica stabilized the mixed structure of silica and carbonic complex, and made the particle uniform. The results also showed that hydrothermal synthesis time did not have a strong influence on the size of pore. The bigger specific surface area was obtained as the hydrothermal synthesis time was extended. However, the specific surface area was getting smaller again after a certain period of time. In adsorption experiments, $CH_4$ was used as adsorbate. For the case of $CH_4$, MCT3 showed the highest adsorption efficiency.

• Journal of the Korean Wood Science and Technology
• /
• 제30권4호
• /
• pp.33-40
• /
• 2002

본 연구는 한국산 주요 수종의 간벌재 및 목질재료 탄화물의 흡착 특성과 기본적인 성질과의 관계를 검토하였다. 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 국산 간벌재 탄화물의 메틸렌블루 흡착량(MBA)이 증가하는 경향을 보였지만, 탄화온도 600℃에서 최고치를 보이는 목재 수종도 있었다. 수종간 MBA에는 큰 차이가 있었는데 가장 큰 값은 잣나무 탄화물(134 m²/g)이였고, 가장 작은 값은 굴참나무 탄화물(34 m²/g)이였다. 또한 침엽수재는 활엽수재보다 높은 MBA를 나타냈으며, MBA와 탄화전 간벌재의 기건비중과는 부의 상관성을 나타냈다. 목질재료 탄화물의 MBA도 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 증가하는 경향을 보였고, 목질 재료간 MBA의 차이는 크지 않았다. 목질재료 탄화물의 MBA는 간벌재 탄화물에 비해 낮은 수준을 나타내는 것으로 드러났다. 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 간벌재 및 목질재료 탄화물의 비표면적, 총세공용적은 증가하는 경향을 보였고, 탄화온도 600℃에서 MBA의 최고치를 보인 수종은 비표면적도 같은 온도에서 최고치를 나타냈다. MBA와 비표면적 및 총 세공용적간에는 정의 상관을 보였다. 목질재료 탄화물에는 주로 미세 세공이 발달하는 것으로 밝혀졌다.

• 적정기술학회지
• /
• 제7권1호
• /
• pp.59-71
• /
• 2021

하이브리드수열탄화 (Hybrid HTC) 기술은 2가지 이상의 유기성폐기물을 혼합한 특허 받은 열역학 공정으로 공정온도 180~250℃, 압력 20~40 bar에서 반응시간이 2시간 이내이며 에너지 소비가 적고, 폐기물의 부피감소 및 악취 저감효과가 크다. 폐기물 중 대부분의 탄소가 최종 생성물에 축적되므로 유기성 폐기물 고형연료화에 가장 적합한 기술로 평가받고 있다. 본 연구에서는 하이브리드 수열탄화기술을 활용하여 캄보디아 망고 폐기물을 대상으로 온도 및 반응시간의 변화에 따라 발열량 및 수율 등에 미치는 영향에 대하여 평가하였다. 본 연구를 통해 공정변수를 최적화하고, 전공정플랜트의 에너지 효율성을 향상시킬 수 있으며, 수연탄화기술에서 분해되어 가스가 생성되는데 이때 수소(H₂) 및 메탄(CH₄) 등 제조 및 생산기술개발을 할 수 있다. 본 연구 결과를 토대로 망고폐기물(2t/day)실증 물질수지 및 에너지 수지 도출과 함께 경제성도 평가하였다.

• Carbon letters
• /
• 제2권3_4호
• /
• pp.182-191
• /
• 2001

Quinoline insoluble formed by the heat treatment was hot-pressed near its softening point. The green body was stabilized in the temperature range of $300{\sim}400^{\circ}C$ and subsequently carbonized below $1300^{\circ}C$ in an argon atmosphere. The behaviors of QI formation was examined with varying the heat treatment temperature and the lapse of time of the sample carbonized at various temperatures. And the mechanical property, corrosion resistance, and friction behavior were also measured optimum content of mesophase pitch ensured a dense structure and high $LC_{(002)}$ value, which resulted in high mechanical properties, good corrosion resistance, and low-stable friction behavior.