• 세라미스트
• /
• 제23권2호
• /
• pp.114-131
• /
• 2020

Fracture in the titanium carbonitride-metal composites occurs by crack propagation through the carbonitride grains or in the interfaces. Thus, intrinsic properties of the carbonitride need to be enhanced and the interfaces should be also modified to coherent structure to strengthen the composites. Especially, interfacial structure can be the main factor to determine the mechanical properties of titanium carbonitride-metal composites because the interfaces between carbonitride grains and metallic phase are weak parts due to heterogeneous nature of carbonitride and metallic phase. In this paper, methodologies for improving the interfacial structure of titanium carbonitride-metal composites are suggested. Total area of the interfaces can be reduced using solid solution type carbonitrides as raw materials instead of a mixture of various carbonitrides in the composites. Also, synthesis of titanium carbonitride-metal composite powders and the low-temperature sintering of the composite powders for short time can be the way for formation of coherent interfaces. The sintering of the composite powders for short time at low temperature can reduce the potential of formation of interfaces by dissolution and precipitation of carbonitride in the liquid metal. As a result of formation of coherent boundaries due to low-temperature and short-time sintering, interfaces between titanium carbonitride grains and metallic phase have the favorable structure for the enhanced fracture toughness. It is believed that the low-temperature sintering of solid solution type composite powders for short time can be the way to improve the low toughness of the titanium carbonitride-metal composites.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.12.2-12.2
• /
• 2007

• 한국자기학회지
• /
• 제2권3호
• /
• pp.244-250
• /
• 1992

고밀도 자기기록 매체인 iron carbonitride는 출발물질인 iron oxalate$(FeC_2O_4{\cdot}2H_2O)$를 암모니아-수소 혼합 분위기 상태에서 질화함으로써 제조되었다. 또한 carbonitride 결정의 형태는 출발물질의 제조조건에 의존하며, 이의 침전반응 조건은 $60^{\circ}C,$ 30분이 가장 적당하였다. Fe일부에 대한 Sn의 치환은 입자성장을 억제하고, 침상성을 증가시키는 효과가 있었다. 전자현미경 관찰결과, 질화철 입자는 많은 미세한 단위입자들이 입체망목적으로 연결되어 있었으며, 이 단위입자는 단자구 정도의 크기로 관찰되었다. 이때 보자력과 포화자화는 각각 500 Oe, 120 emu/g 이었다.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.443-448
• /
• 1997

Titanium carbonitride (Ti(CxN1-x)) ceramics were prepared by hot pressing of the mixture of TiN and graphite. Hot pressing was performed in a graphite mold at 198$0^{\circ}C$ for 40 min under 44 MPa in N2 atmosphere. The effect of graphite addition on sinterability and the mechanical properties of titanium carbonitride were investigated. In this study, the solubility limit of graphite in Ti(CxN1-x) was slightly below 10 wt% based on the results of XRD analysis. Within the solubility limit, graphite dissolved completely into titanium nitride and formed the single phase Ti(CxN1-x) solid solution. Peak relative density of 99% and hardness of 16 GPa were observed for Ti(CxN1-x) ceramics with 7 wt% graphite while maximum flexural strength of 500 MPa and fracture toughness of 4.0 MPa.m1/2 were observed for Ti(CxN1-x) ceramics with 10 wt% graphite. The electrical resistivities of the ceramics with 7 wt% and 10 wt% graphite were observed 40 {{{{ mu OMEGA }}cm and 50 {{{{ mu OMEGA }}cm respectively.

• 연구논문집
• /
• 통권28호
• /
• pp.193-207
• /
• 1998

Fully dense THCN) based carbonitride ceramics were fabricated by pressureless sintering. During sintering, solid solutions were formed from the ceramic ingredients. The ceramics exhibited microvickers hardness of 1560-2050kgf/mm2, fracture toughness of 3.0-5.4 MPa $m^(1/2)$, and three point flexural strength of 645-1072 MPa. Some of the ceramics were shaped in a cutting tool, and the cutting performance was evaluated. In case of cutting SCM440 alloy steel, the ceramics showed better performance than the commercially available alumina-titanium carbide ceramic cutting tool. Considering the excellent productivity of pressureless sintering compared with other densification methods and their cutting performance, this new class of ceramics are very promising for wear resistant applications.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.637-642
• /
• 1994

Using SHS(Self-propagating High-temperature Synthesis) method, the optimum synthetic condition of titanium carbonitride was established by controlling the parameters such as relative density of mixture (Ti+C), nitrogen pressure, additive amounts of titanium hydride(TiH1.924) and protecting heat loss. Under 1 atm nitrogen pressure, nitridation ratio with changing relative density of the sample compacts has a maximum (87.2%) at about 55%, and in the case of enveloping the pellet with a quartz tube, the highest nitridation ratio of 90% was obtained at about 68%. At relative density of 55%, nitridation ratio with the nitrogen pressure has a miximum (87.3%) at 7 atm. As the amounts of additive titanium hydride increased, nitridation ratio decreased at below 7 atm nitrogen pressure and, increased at above this pressure until percent of addition percent reached 15 wt% and decreased abruptly upon futher increases in titanium hydride. In the synthesis of TiCxNy by combustion reaction, heat transfer from combustion zone to preheating zone and nitrogen gas penetration into the compact were found to be important factors affecting the TiCxNy formation. It was difficult to obtain high nitridation ratio when the conbustion temperature was either too high or too low, and it seems that the retention of high temperature after a combustion wave sweeped through the reactant mixture pellet is critical to obtain a satisfactory nitridation ratio.

• Composites Research
• /
• 제33권6호
• /
• pp.395-400
• /
• 2020

본 연구에서는 카본나노튜브(CNT) 면상발열체에 preceramic polymer 중 하나인 실세스퀴아잔을 코팅하여 고온에서 안정적인 발열이 가능한 CNT/SiCN 복합체 시트를 제조하였다. 제조된 복합체 필름은 FE-SEM을 통해 실세스퀴아잔이 CNT 면상발열체의 표면을 모두 코팅한 것을 확인하였다. 또한 800℃의 열처리를 통해 실세 스퀴아잔이 SiCN 세라믹으로 전환되어도 표면의 결함이 발견되지 않고 온전한 구조를 유지하는 것을 확인하였다. CNT/SiCN 복합체 시트는 질소와 공기 분위기 모두에서 기존의 CNT 시트보다도 높은 열적 안정성을 확보할 수 있었다. 마지막으로 제조된 CNT/SiCN 복합체 필름은 대기 중에서 700℃ 이상의 온도로 발열이 가능하였고 발열 후 온도를 식히고 재발열 또한 성공적으로 이루어졌다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.215-216
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2416-2418
• /
• 2010

• 분석과학
• /
• 제7권4호
• /
• pp.493-504
• /
• 1994

Nb steel에 있어서의 석출물의 형상과 구조를 SEM, TEM과 XRD를 이용하여 연구하였고 추출물들의 정량분석을 ICP-AES를 사용하여 실시하였다. 석출물 추출 방법으로는 정전위 전해추출법을 사용하였고 전해액으로는 10% AA-methanol 용액과 15% Na-citrate 용액을 사용하여 비교하였다. 전해추출 전위는 10% AA-methanol 용액에서는 -100mV, 15% Na-citrate 용액에서는 -250mV로 선택하였고 이 전위에서 Nb 석출물을 분리하는 데 적당하였다. 추출 잔사 중의 $Fe_3C$의 크기는 $0.2{\sim}1.0{\mu}m$ 정도였고 Nb 탄질화물의 크기는 $0.003{\sim}0.1{\mu}m$ 정도였다. 0.1% C-0.007% Nb-0.004% N의 조성을 가진 강에서 Nb 석출물의 조성은 $NbC_{0.65}N_{0.2}$인 것으로 나타나 입방정계의 탄질화물인 것으로 판명되었다.